Do you handle the firestopping as well as the board?

We firestop the penetrations that fall within our scope and coordinate the sequence with the other trades so nothing is covered before it is sealed. Where a penetration belongs to another trade, we flag it rather than tape over it.

Is a fire-rated wall also soundproof?

It helps a little because it is denser, but rating and acoustic performance are separate specifications. A suite separation usually needs both, built together. If sound is the real goal we would rather design for it explicitly.

Can pot lights go in a rated ceiling?

Only with fixtures and firestopping suited to that assembly. A standard fixture cut into a rated Edmonton ceiling breaks the separation. We coordinate the locations with your electrician so the penetrations are handled before we tape.

My Edmonton garage ceiling has board but the joints are open. Is that a problem?

Usually yes. Untaped joints are one of the most common reasons a garage separation is not complete, because the board looks installed. Often the fix is finishing the joints and sealing penetrations rather than replacing the ceiling.

Do you stand behind your fire-rated work in Edmonton?

Yes. We install to code and walk the Edmonton job with you, and if something is not right we come back and make it right.

What if someone cuts into it later?

That is the risk — a fan, a light or a duct added later can quietly undo the assembly. We photograph the rated work before covering it so there is a record of what is behind the finish for whoever works on the house next.

Fire-Rated Drywall Edmonton

Fire-Rated Drywall

Fire-rated drywall in Edmonton, Edmonton — Type X board and rated assemblies for garage firewalls, basement suites and party walls, installed to code. Free on-site quotes, 7 days a week.

Emplastrum Drywall 5-Star Google Reviews

Rated separations in Edmonton that pass inspection the first time

Where code requires it in Edmonton, fire-rated board is mandatory: garage-to-house separations, suites and party walls take Type X in a rated assembly — for inspection and for safety. In Edmonton we install fire-rated drywall to code and finish it clean. Edmonton is an Edmonton community with a mix of older homes and newer builds, so fire-rated work here is common on garages and suites. We cover Edmonton, Abbottsfield, Albany, Alberta Avenue, Aldergrove, Allard, Allendale and Edmonton, 7 days a week.

Party walls and legal-suite separations
Edmonton coverage — we come to you
Party walls between units
Type X board to the assembly on the drawings
Garage ceilings and garage-to-house separations in Edmonton
Rated assemblies installed and sealed correctly
Type X fire-rated board to code in Edmonton

Type X and Type C are not interchangeable

Two different boards

Type X is the common 5/8 inch rated board. Type C carries additional additives that resist shrinkage at high heat and is specified where an assembly — often a ceiling — depends on the board staying in place longer.

Substituting downward fails

Where drawings call for Type C, Type X is not an equivalent, and an inspector who spots it will fail the assembly. We order to the specification on your Edmonton drawings and tell you if what is on site does not match it.

Inspection, and what we hand over

Sequencing with your inspection

Rated assemblies in Edmonton are usually inspected before the finish covers them, so we sequence boarding and firestopping to suit your inspection date rather than working ahead and covering something the inspector needs to see.

If something fails

If an assembly does not pass, we want to hear the inspector reason directly. Most failures are specific and fixable — a screw pattern, an untaped joint, an unsealed penetration — and are corrected faster from the actual note than from a second-hand summary.

Fire-rated drywall in a Edmonton garage ceiling

The most common one we do

Where Edmonton living space sits over a garage, the ceiling normally needs a rated separation. It is also the assembly most often found incomplete on older homes and DIY conversions — board up, joints untaped, pot lights cut straight through.

What we check before quoting

We look at what is above the ceiling, what is already installed, and whether the existing board is actually rated. Sometimes the honest answer is that the existing ceiling only needs its joints completed and its penetrations sealed rather than replacing.

Rated ceilings and the membrane above

Protecting the structure

A rated ceiling under living space is protecting the floor structure above it, which is why the board and its fastening are specified rather than optional.

Access hatches

Any hatch through it interrupts the assembly and needs a rated detail. It is a common find in Edmonton garages where storage access was cut in afterwards and never addressed.

Where Edmonton homes usually need rated board

The four common places

Most rated drywall in Edmonton houses is one of: the garage ceiling where living space sits above it, the garage-to-house wall, the furnace or mechanical room, and a legal-suite separation between dwelling units.

Renovations trigger it too

Finishing a basement, adding a suite or converting a garage often brings a separation into play that was not there before. If you are not sure whether your Edmonton project triggers one, that is a question for the building official at permit stage, and we will tell you when we think you should ask.

Finishing a rated wall in Edmonton without compromising it

Rated first, pretty second

Taping on a rated assembly in Edmonton does two jobs: it completes the fire separation and it produces the surface you will paint. The tape and fill on the rated joints is not optional cosmetic work.

Level of finish

Beyond the rated joint treatment, the visible finish level is your choice — a garage ceiling rarely needs the same finish as a living room. We will tell you where a higher level is worth paying for and where it is not.

How it works

Simple, clean, on schedule — Fire-Rated Drywall in Edmonton

Free quote

We come out to your Edmonton property, take a real look at the fire-rated drywall, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every fire-rated drywall quote in Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the fire-rated drywall in Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Edmonton home while we finish the fire-rated drywall to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished fire-rated drywall with us and you're happy with the result in Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the fire-rated drywall contractor Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your fire-rated drywall project in Edmonton.

Read our reviews on Google

FAQ — Fire-Rated Drywall Edmonton

Fire-Rated Drywall Edmonton: your questions answered

Do you handle the firestopping as well as the board?: We firestop the penetrations that fall within our scope and coordinate the sequence with the other trades so nothing is covered before it is sealed. Where a penetration belongs to another trade, we flag it rather than tape over it.
Is a fire-rated wall also soundproof?: It helps a little because it is denser, but rating and acoustic performance are separate specifications. A suite separation usually needs both, built together. If sound is the real goal we would rather design for it explicitly.
Can pot lights go in a rated ceiling?: Only with fixtures and firestopping suited to that assembly. A standard fixture cut into a rated Edmonton ceiling breaks the separation. We coordinate the locations with your electrician so the penetrations are handled before we tape.
My Edmonton garage ceiling has board but the joints are open. Is that a problem?: Usually yes. Untaped joints are one of the most common reasons a garage separation is not complete, because the board looks installed. Often the fix is finishing the joints and sealing penetrations rather than replacing the ceiling.
Do you stand behind your fire-rated work in Edmonton?: Yes. We install to code and walk the Edmonton job with you, and if something is not right we come back and make it right.
What if someone cuts into it later?: That is the risk — a fan, a light or a duct added later can quietly undo the assembly. We photograph the rated work before covering it so there is a record of what is behind the finish for whoever works on the house next.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Fire-Rated Drywall Edmonton

Rated separations in Edmonton that pass inspection the first time

Fire-Rated Drywall Edmonton

Type X and Type C are not interchangeable

Two different boards

Substituting downward fails

Fire-Rated Drywall in every Edmonton community

Where we work in Edmonton

Inspection, and what we hand over

Sequencing with your inspection

If something fails

Fire-rated drywall in a Edmonton garage ceiling

The most common one we do

What we check before quoting

Rated ceilings and the membrane above

Protecting the structure

Access hatches

Where Edmonton homes usually need rated board

The four common places

Renovations trigger it too

Finishing a rated wall in Edmonton without compromising it

Rated first, pretty second

Level of finish

Simple, clean, on schedule — Fire-Rated Drywall in Edmonton

Free quote

Book a day

The work

Walk it with you

Rated by Edmonton Homeowners

Fire-Rated Drywall Edmonton: your questions answered

Fire-Rated Drywall in every Edmonton community

Estimate Your Drywall Materials

How much do you need?

Want it quoted properly?