Is a fire-rated wall also soundproof?

It helps a little because it is denser, but rating and acoustic performance are separate specifications. A suite separation usually needs both, built together. If sound is the real goal we would rather design for it explicitly.

Will it pass inspection in Jasper Park?

Yes — we install the correct Type X assembly and seal penetrations to spec so your Jasper Park separation passes inspection.

Do you stand behind your fire-rated work in Jasper Park?

Yes. We install to code and walk the Jasper Park job with you, and if something is not right we come back and make it right.

Do you install fire-rated drywall in Jasper Park?

Yes — fire-rated drywall in Jasper Park is part of our regular work, and we are usually booked within the week. We also cover Britannia Youngstown, Canora, Crestwood and Jasper Place.

Where is fire-rated drywall required?

The standard Jasper Park fire-rating locations: garage-to-house walls, basement suites and party walls between units. We confirm what your Jasper Park project needs.

Do you handle the firestopping as well as the board?

We firestop the penetrations that fall within our scope and coordinate the sequence with the other trades so nothing is covered before it is sealed. Where a penetration belongs to another trade, we flag it rather than tape over it.

Fire-Rated Drywall Jasper Park Edmonton | Type X Board

Fire-rated drywall in Jasper Park, installed to code

A fire-rated wall is not a board, it is an assembly. In Jasper Park that means the specified board thickness and type, the specified stud and screw spacing, taped joints, and every penetration firestopped. Miss any one of those and the rating is not there, whatever the board says on the back.

Rated assemblies installed and sealed correctly
Party walls between units
Basement legal-suite fire separations
Type X fire-rated board to code in Jasper Park
Joints taped as part of the rated assembly, not just for looks
Garage-to-house firewall separations
Penetrations firestopped before the finish goes on

Fire-rated drywall in a Jasper Park garage ceiling

The most common one we do

Where Jasper Park living space sits over a garage, the ceiling normally needs a rated separation. It is also the assembly most often found incomplete on older homes and DIY conversions — board up, joints untaped, pot lights cut straight through.

What we check before quoting

We look at what is above the ceiling, what is already installed, and whether the existing board is actually rated. Sometimes the honest answer is that the existing ceiling only needs its joints completed and its penetrations sealed rather than replacing.

Jasper Park drywall in context

About Jasper Park

Once part of the Town of Jasper Place (which was annexed by the City in 1964) Jasper Park was developed in the 1950s and 60s.

What we see in Jasper Park

In Jasper Park the drywall work is plaster and lath repair, popcorn and stipple ceiling removal, careful patching into original surfaces. We confirm what your home actually needs on site, in writing, before anything starts.

Joints, screws and the details inspectors actually check

The parts nobody photographs

A rated assembly in Jasper Park depends on screw spacing, joints landing on framing, and joints being taped and filled. Loose screw spacing, unsupported butt joints and untaped joints are the usual reasons a rated wall does not pass.

Two-layer assemblies

Where the assembly is two layers, the second layer joints are offset from the first so no joint runs straight through the wall. That offset is part of the rating, not a finishing preference.

Board thickness and why 5/8 is standard here

Not just thicker

Type X is 5/8 inch because the core needs that mass and the glass-fibre reinforcement to hold together as the gypsum calcines under heat.

The common error

Using 1/2 inch board in a rated Jasper Park assembly because it is what was on site. It looks identical once finished and it is not the tested assembly. Board arriving on site is checked against the specification rather than assumed.

What happens when an assembly is altered later

Every future trade is a risk

A rated Jasper Park wall or ceiling stays rated only while nobody cuts an unsealed hole in it. Later work — a fan, a light, a duct, a speaker — can quietly undo it.

What we leave you

We photograph the rated work before covering it, so there is a record of what is behind the finish for whoever works on the house next.

One-hour and two-hour assemblies

What the number means

A rating is how long a tested assembly resisted fire under laboratory conditions, not a guarantee about your Jasper Park house. One hour is the common residential separation; two hour appears between units in some buildings.

Why it changes the build

A two-hour assembly is usually two layers of board with offset joints, which changes material, labour and thickness. It is specified on the drawings and it is not something to substitute down.

What affects the cost of fire-rated drywall in Jasper Park?

Area and assembly

The cost in Jasper Park depends on the area and the rated assembly required — a single-layer garage ceiling is different from a two-layer party wall. The Jasper Park rating drives the build-up, and Type X board carries a premium over standard. We price off the spec and a site look.

Passing inspection in Jasper Park

The common rated jobs here are garages and suites. The rating only holds if the assembly is built and sealed exactly to spec, so we install it to code and seal penetrations properly so your Jasper Park project passes the first time.

How it works

Simple, clean, on schedule — Fire-Rated Drywall in Jasper Park Edmonton

Free quote

We come out to your Jasper Park Edmonton property, take a real look at the fire-rated drywall, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every fire-rated drywall quote in Jasper Park Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the fire-rated drywall in Jasper Park Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Jasper Park Edmonton home while we finish the fire-rated drywall to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished fire-rated drywall with us and you're happy with the result in Jasper Park Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the fire-rated drywall contractor Jasper Park Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your fire-rated drywall project in Jasper Park Edmonton.

Read our reviews on Google

FAQ — Fire-Rated Drywall Jasper Park Edmonton

Fire-Rated Drywall Jasper Park Edmonton: your questions answered

Is a fire-rated wall also soundproof?: It helps a little because it is denser, but rating and acoustic performance are separate specifications. A suite separation usually needs both, built together. If sound is the real goal we would rather design for it explicitly.
Will it pass inspection in Jasper Park?: Yes — we install the correct Type X assembly and seal penetrations to spec so your Jasper Park separation passes inspection.
Do you stand behind your fire-rated work in Jasper Park?: Yes. We install to code and walk the Jasper Park job with you, and if something is not right we come back and make it right.
Do you install fire-rated drywall in Jasper Park?: Yes — fire-rated drywall in Jasper Park is part of our regular work, and we are usually booked within the week. We also cover Britannia Youngstown, Canora, Crestwood and Jasper Place.
Where is fire-rated drywall required?: The standard Jasper Park fire-rating locations: garage-to-house walls, basement suites and party walls between units. We confirm what your Jasper Park project needs.
Do you handle the firestopping as well as the board?: We firestop the penetrations that fall within our scope and coordinate the sequence with the other trades so nothing is covered before it is sealed. Where a penetration belongs to another trade, we flag it rather than tape over it.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Fire-Rated Drywall Jasper Park Edmonton

Fire-rated drywall in Jasper Park, installed to code