Free on-site quotes7 days a weekEdmonton · St. Albert · Sherwood Park · Spruce GroveLocally owned & operatedThe Go-To Drywall Contractor for Repair, Restoration & Finishing

Lath-and-plaster repair in Edmonton without gutting the room

Movement in older Edmonton homes registers in the plaster first — fine cracks, bulges where it left the lath, edges crumbling at old patches. In Edmonton we repair plaster walls and ceilings and blend the work into the surrounding surface, or skim the whole wall to a flat modern finish. Edmonton is an Edmonton community with a mix of older homes and newer builds, so plaster work here ranges from spot crack repair to full-wall resurfacing. We cover Edmonton, Abbottsfield, Albany, Alberta Avenue, Aldergrove, Allard, Allendale and Edmonton, 7 days a week.

Plaster Repair Edmonton

Watch plaster repair jobs in Edmonton on our YouTube channel

What affects the cost of plaster repair in Edmonton?

Crack repair vs bulging plaster

The cost of plaster repair in Edmonton depends on whether it is a surface crack, bulging plaster that has separated from the lath, or a failed section that needs cutting out. Quick fixes in Edmonton are the surface cracks — failed plaster needing re-securing or replacement takes longer and more material. We assess on site and give a fixed price first.

Repair vs skim-over in Edmonton

Many plaster walls here are best skim-coated over once the damage is stabilised — it brings an old wall back to a flat, modern finish rather than chasing endless cracks. We tell you honestly which makes sense for your Edmonton home.

Plaster Repair in every Edmonton community

Where we work in Edmonton

We cover plaster repair across Edmonton. Pick your community below for the detail that applies to your street.

Why Edmonton plaster cracks in the first place

Movement, not bad workmanship

Most cracking in Edmonton plaster is seasonal movement rather than a defect. Alberta humidity swings move a timber frame, and plaster is rigid, so it relieves that stress at its weakest points: the corners of door and window openings, and the joint between ceiling and wall.

What that means for the repair

A crack that moves has to be taped, not just filled. Filler on its own bridges the gap and re-cracks in the first dry spell. We tape across the crack so the repair can take the movement, then skim it out flat.

Matching a repair into an old Edmonton wall

Flat is not always right

An invisible plaster repair is not the flattest patch, it is the patch that matches what surrounds it. Old Edmonton plaster is rarely dead flat and often carries a light sand or trowel texture. A perfectly flat patch in the middle of it reads as a rectangle under side light.

Feathering and texture

We feather the skim well past the repair so there is no edge to catch the light, then match the surrounding texture before priming. Where a wall is too uneven to blend into, skimming the whole wall gives a better result than fighting the join.

Reattaching plaster without removing it

Washers and adhesive

Where Edmonton plaster has separated but is otherwise sound, plaster washers screwed through into the lath or joists pull it back and hold it, sometimes with an injected adhesive behind.

Why it is worth doing

It preserves the original surface, is far less disruptive than removal, and costs less. It only works where the plaster itself is still strong, which is what the sounding test establishes.

Our Edmonton plaster repair process, step by step

Stabilise the plaster first

A plaster repair in Edmonton only lasts if the plaster is stable. Pulled-away Edmonton plaster gets re-anchored; crumbling sections get cut back to sound material first. That skipped step is why Edmonton plaster patches so often re-crack.

Patch, skim, blend

The right plaster-grade material goes in, the area or full wall gets skimmed flat, edges feathered wide, then sanded paint-ready. In most Edmonton homes, once it is painted you will not find where we worked.

Plaster over masonry and chimney breasts

A different substrate again

Plaster applied directly to brick or block in an older Edmonton home has no lath and no keys — it bonds to the masonry itself.

Common failure

It fails where damp has reached the masonry, and repairing the surface without addressing the moisture just moves the problem along the wall. We look for the source before quoting the repair.

Simple, clean, on schedule — Plaster Repair in Edmonton

1

Free quote

We come out to your Edmonton property, take a real look at the plaster repair, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every plaster repair quote in Edmonton starts with an honest, on-site assessment.

2

Book a day

We pick a day that works for your schedule and show up on time, ready to start the plaster repair in Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

3

The work

We keep the dust under control and protect your Edmonton home while we finish the plaster repair to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

4

Walk it with you

We don't pack up till you've walked the finished plaster repair with us and you're happy with the result in Edmonton. If anything needs a second look, we handle it before we call the job done.

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the plaster repair contractor Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your plaster repair project in Edmonton.

Read our reviews on Google

Plaster Repair Edmonton: your questions answered

Can loose plaster be saved without removing it?
Usually yes, if the plaster itself is still strong. Plaster washers screwed into the lath or joists pull it back and hold it, sometimes with adhesive behind. It preserves the original surface and costs less than removal.
Can you repair Edmonton plaster without tearing the wall out?
In most cases, yes. If the plaster is still keyed to the lath it gets re-anchored and skimmed rather than removed. We only cut out sections that have genuinely failed, and we tell you on site which of the two you have.
Can you match plaster to my drywall reno in Edmonton?
Yes — blending old plaster into new drywall is common in Edmonton renos. Thickness and texture get matched on Edmonton repairs — no visible line under paint.
Do you repair Edmonton plaster that has separated from the lath?
Yes. Separated Edmonton plaster gets re-anchored to the lath — or failed sections replaced — then skimmed and blended invisible.
My old walls have hairline cracks all over. What is that?
Usually crazing — shrinkage in the finish coat or a failing paint film rather than structural movement. Filling each line leaves a wall of filled lines; it needs the surface stabilised and skimmed as a whole.
Is spot repair enough for my Edmonton plaster, or should the wall be skimmed?
It depends on the wall. In Edmonton, isolated cracks in sound plaster mean spot repair — widespread cracking or waves mean a full skim. We give you a straight answer for your Edmonton home.

Need Edmonton’s go-to drywall contractor for repair, restoration and finishing? One trusted team for boarding, taping, finishing, repairs & renovations — start to finish.

Your Drywall Contractor in Edmonton →
Get Your Free Drywall Quote
Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.
No obligation. We never share your information.
📞  Call (403) 829-8702 Free Quote

Plaster Repair in every Edmonton community

See our latest drywall projects & updates on FacebookFollow Emplastrum Drywall — Edmonton, St. Albert, Sherwood Park, Spruce Grove & Stony Plain Follow on Facebook