My old walls have hairline cracks all over. What is that?

Usually crazing — shrinkage in the finish coat or a failing paint film rather than structural movement. Filling each line leaves a wall of filled lines; it needs the surface stabilised and skimmed as a whole.

My Summerside ceiling has a sag in it. Is that urgent?

Treat it as urgent. A sagging plaster ceiling has lost its keys and is holding itself against gravity. Keep people out from under it and call us. We will tell you whether it can be re-secured with plaster washers or has to come down.

Repair or full-wall skim — which is right for Summerside plaster?

It depends on the wall. A few cracks in solid Summerside plaster we spot-fix; walls with extensive cracking or waviness do better skimmed flat. We give you a straight answer for your Summerside home.

Can you repair Summerside plaster without tearing the wall out?

In most cases, yes. If the plaster is still keyed to the lath it gets re-anchored and skimmed rather than removed. We only cut out sections that have genuinely failed, and we tell you on site which of the two you have.

The corner of my plaster wall is bubbling. Why?

Often a corroded metal bead beneath. Rust expands and pushes the plaster off from behind, so filling it just brings the same failure back. That bead section has to come out and be replaced.

Do you work on lath-and-plaster and on modern veneer plaster?

Both. Wood-lath and gypsum-lath plaster in older Summerside homes, and veneer plaster over blueboard in newer builds. The failure modes are different, so we identify which you have before quoting.

Plaster Repair Summerside Edmonton | Lath & Plaster

Lath-and-plaster repair in Summerside without gutting the room

Plaster does not fail the way drywall does. In Summerside the first sign is usually a hairline crack tracking off a door or window corner, or a soft spot in a ceiling where the keys have let go of the lath. We work out which of those you have before quoting, because a surface crack and a delaminated ceiling are different jobs at different costs.

Delaminated Summerside ceilings re-secured or rebuilt
Hairline and settlement crack repair in Summerside
Summerside lath-separated plaster bulges re-secured
Dust-controlled work in older Summerside homes
Bulging plaster re-anchored to the lath with plaster washers
Skim coating over sound plaster for a flat modern finish
Water-damaged plaster cut back to sound material

Corner beads in plaster walls

Metal that rusts

Older Summerside plaster corners often have metal bead beneath, and where moisture has reached it the rust expands and pushes the plaster off from behind.

Why filling fails

Filling that corner without dealing with the corroded bead means the same failure returns, because the cause is still expanding. The bead section comes out and is replaced.

Living in the house while Summerside plaster is repaired

Dust is the real disruption

Plaster repair makes fine dust that travels, so containment matters more here than on new work. We seal the working area, cover floors, and run the sanding to a vacuum where the job allows it.

Sequencing around you

Plaster repairs cure in coats, so a room is usually worked over several visits rather than one long day. We sequence so the space is usable between coats wherever possible, and we say up front which days it genuinely will not be.

Water-damaged plaster in Summerside

Find the source first

We do not repair water-damaged Summerside plaster until the leak is fixed and the substrate is dry, because plaster over damp lath fails again within a season.

What has to come out

Water breaks the bond between plaster and lath and rots the keys even where the surface still looks solid. Stained plaster gets sounded well past the visible mark and cut back to material that is genuinely sound, then rebuilt and blended. Where the stain sits only in the paint film and the plaster behind it rings solid, a stain-blocking primer and a skim is the honest fix.

Is the plaster still keyed to the lath?

The one question that sets the price

Traditional Summerside plaster was pushed through wood lath so it squeezed out behind and hardened into keys. Those keys are all that hold it up. When they break, the plaster separates and the wall bulges or the ceiling sags.

How we check

We press and sound the surface by hand across the whole area, not only at the crack. Where the plaster still holds, it stays and gets skimmed. Where the keys have gone, that section is re-anchored with plaster washers or cut out and rebuilt. Nothing comes out that does not need to.

Why Summerside plaster cracks in the first place

Movement, not bad workmanship

Most cracking in Summerside plaster is seasonal movement rather than a defect. Alberta humidity swings move a timber frame, and plaster is rigid, so it relieves that stress at its weakest points: the corners of door and window openings, and the joint between ceiling and wall.

What that means for the repair

A crack that moves has to be taped, not just filled. Filler on its own bridges the gap and re-cracks in the first dry spell. We tape across the crack so the repair can take the movement, then skim it out flat.

Reattaching plaster without removing it

Washers and adhesive

Where Summerside plaster has separated but is otherwise sound, plaster washers screwed through into the lath or joists pull it back and hold it, sometimes with an injected adhesive behind.

Why it is worth doing

It preserves the original surface, is far less disruptive than removal, and costs less. It only works where the plaster itself is still strong, which is what the sounding test establishes.

How it works

Simple, clean, on schedule — Plaster Repair in Summerside Edmonton

Free quote

We come out to your Summerside Edmonton property, take a real look at the plaster repair, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every plaster repair quote in Summerside Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the plaster repair in Summerside Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Summerside Edmonton home while we finish the plaster repair to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished plaster repair with us and you're happy with the result in Summerside Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the plaster repair contractor Summerside Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your plaster repair project in Summerside Edmonton.

Read our reviews on Google

FAQ — Plaster Repair Summerside Edmonton

Plaster Repair Summerside Edmonton: your questions answered

My old walls have hairline cracks all over. What is that?: Usually crazing — shrinkage in the finish coat or a failing paint film rather than structural movement. Filling each line leaves a wall of filled lines; it needs the surface stabilised and skimmed as a whole.
My Summerside ceiling has a sag in it. Is that urgent?: Treat it as urgent. A sagging plaster ceiling has lost its keys and is holding itself against gravity. Keep people out from under it and call us. We will tell you whether it can be re-secured with plaster washers or has to come down.
Repair or full-wall skim — which is right for Summerside plaster?: It depends on the wall. A few cracks in solid Summerside plaster we spot-fix; walls with extensive cracking or waviness do better skimmed flat. We give you a straight answer for your Summerside home.
Can you repair Summerside plaster without tearing the wall out?: In most cases, yes. If the plaster is still keyed to the lath it gets re-anchored and skimmed rather than removed. We only cut out sections that have genuinely failed, and we tell you on site which of the two you have.
The corner of my plaster wall is bubbling. Why?: Often a corroded metal bead beneath. Rust expands and pushes the plaster off from behind, so filling it just brings the same failure back. That bead section has to come out and be replaced.
Do you work on lath-and-plaster and on modern veneer plaster?: Both. Wood-lath and gypsum-lath plaster in older Summerside homes, and veneer plaster over blueboard in newer builds. The failure modes are different, so we identify which you have before quoting.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Plaster Repair Summerside Edmonton

Lath-and-plaster repair in Summerside without gutting the room