Free on-site quotes7 days a weekEdmonton · St. Albert · Sherwood Park · Spruce GroveLocally owned & operatedThe Go-To Drywall Contractor for Repair, Restoration & Finishing

Insulation installation in Edmonton, before the drywall goes up

In Abbottsfield, Albany, Alberta Avenue, Aldergrove, Allard, Allendale the insulation disappears behind board forever, which is why we get it right first: full fill, no compression, proper vapour barrier. In Abbottsfield, Albany, Alberta Avenue, Aldergrove, Allard, Allendale we install batt and acoustic insulation in walls and ceilings ahead of drywall. Abbottsfield, Albany, Alberta Avenue, Aldergrove, Allard, Allendale is an older Edmonton community where settling cracks, aging texture and the occasional plaster repair come up, so attic top-ups and wall insulation upgrades are common here alongside basement development, since original insulation levels are often below current standards. We cover Abbottsfield, Albany, Alberta Avenue, Aldergrove, Allard, Allendale and Edmonton, 7 days a week.

Insulation Installation Edmonton

Watch insulation installation jobs in Edmonton on our YouTube channel

Insulation for basements and sound control in Edmonton

Basement development

Basement walls and ceilings in Edmonton need insulation to code before drywall — we install batt to the required R-value along with vapour barrier on exterior walls.

Acoustic insulation for sound control

Acoustic batt inside a wall cavity is a core part of a real sound-dampening assembly, paired with resilient channel and sound board.

Insulation Installation in every Edmonton community

Where we work in Edmonton

We cover insulation installation across Edmonton. Pick your community below for the detail that applies to your street.

Common insulation situations in Abbottsfield, Albany, Alberta Avenue, Aldergrove, Allard, Allendale

New basement developments

Insulating exterior walls and sometimes ceilings before the drywall stage is a regular call.

Renovations and additions

When a wall or ceiling in an Abbottsfield, Albany, Alberta Avenue, Aldergrove, Allard, Allendale home is opened during a renovation, it is the moment to insulate or upgrade the insulation before it is closed back up with new drywall.

Basements, and why they are not like upper floors

Concrete changes everything

An Edmonton foundation wall is cold and can carry ground moisture. Insulation pressed straight against it sits where moisture cannot dry.

The right assembly

The framing is held off the concrete or a rigid layer goes on first, so the cavity insulation stays on the warm side. Getting the order wrong is the usual reason a finished basement smells musty in year two.

Rim joists and the coldest band in the house

Small area, big loss

The rim joist where the floor framing meets the foundation is thin, directly exposed and usually the worst-performing part of an Edmonton basement.

Sealed then insulated

The joint gets air-sealed first, then insulated. A batt tucked loosely against a bare rim joist can trap moist air against cold wood, which is worse than leaving it alone.

Our Edmonton insulation installation process, step by step

Full cavity fill, no shortcuts

We cut and fit batt insulation to fill each stud or joist cavity completely in your Edmonton home — a gap or a compressed corner is where heat loss and sound leak through.

Vapour barrier and drywall-ready

Where the assembly calls for it, we install vapour barrier over the insulation, sealed at the edges, then leave the wall ready for drywall to go straight on. See our basement drywall work in Edmonton for what comes next.

Insulation for basements and sound control in Abbottsfield, Albany, Alberta Avenue, Aldergrove, Allard, Allendale

Basement development

Basement walls and ceilings in Abbottsfield, Albany, Alberta Avenue, Aldergrove, Allard, Allendale need insulation to code before drywall — we install batt to the required R-value along with vapour barrier on exterior walls.

Acoustic insulation for sound control

Acoustic batt inside a wall cavity is a core part of a real sound-dampening assembly, paired with resilient channel and sound board.

Simple, clean, on schedule — Insulation Installation in Edmonton

1

Free quote

We come out to your Edmonton property, take a real look at the insulation installation, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every insulation installation quote in Edmonton starts with an honest, on-site assessment.

2

Book a day

We pick a day that works for your schedule and show up on time, ready to start the insulation installation in Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

3

The work

We keep the dust under control and protect your Edmonton home while we finish the insulation installation to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

4

Walk it with you

We don't pack up till you've walked the finished insulation installation with us and you're happy with the result in Edmonton. If anything needs a second look, we handle it before we call the job done.

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the insulation installation contractor Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your insulation installation project in Edmonton.

Read our reviews on Google

Insulation Installation Edmonton: your questions answered

Do you insulate basement developments to code in Edmonton?
Yes — we install batt and vapour barrier to the R-value your Edmonton basement development requires. We also cover Abbottsfield, Albany, Alberta Avenue, Aldergrove, Allard, Allendale and Edmonton.
Is attic insulation part of the same job?
Related but different — different products, different equipment, and it is about even depth to the eaves with baffles and a sealed ceiling below. We quote it separately rather than folding it into a wall price.
Can you insulate a wall that is already open from a renovation in Abbottsfield, Albany, Alberta Avenue, Aldergrove, Allard, Allendale?
Yes — open cavities during an Abbottsfield, Albany, Alberta Avenue, Aldergrove, Allard, Allendale renovation are the perfect insulation window before boarding.
Do you insulate basement developments to code in Abbottsfield, Albany, Alberta Avenue, Aldergrove, Allard, Allendale?
Yes — the R-value your Abbottsfield, Albany, Alberta Avenue, Aldergrove, Allard, Allendale basement needs is what we install, batt plus vapour barrier. We also cover Abbottsfield, Albany, Alberta Avenue, Aldergrove, Allard, Allendale and Edmonton.
Do you handle acoustic insulation on Edmonton jobs?
Yes — we run acoustic batt inside Edmonton cavities alongside resilient channel and sound board in our soundproofing builds.
Do you install vapour barrier too in Edmonton?
Yes — where the Edmonton assembly calls for it, vapour barrier goes over the insulation, sealed, before drywall.

Need Edmonton’s go-to drywall contractor for repair, restoration and finishing? One trusted team for boarding, taping, finishing, repairs & renovations — start to finish.

Your Drywall Contractor in Edmonton →
Get Your Free Drywall Quote
Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.
No obligation. We never share your information.
📞  Call (403) 829-8702 Free Quote

Insulation Installation in every Edmonton community

See our latest drywall projects & updates on FacebookFollow Emplastrum Drywall — Edmonton, St. Albert, Sherwood Park, Spruce Grove & Stony Plain Follow on Facebook