Is attic insulation part of the same job?

Related but different — different products, different equipment, and it is about even depth to the eaves with baffles and a sealed ceiling below. We quote it separately rather than folding it into a wall price.

Can you install acoustic insulation for sound control in Fraser?

Yes — acoustic batt in the Fraser wall cavity, paired with resilient channel and sound board, is part of our soundproofing work.

Is sound-control insulation available for Fraser walls?

Yes — Balwin, Bannerman, Belmont soundproofing assemblies pair cavity acoustic batt with channel and sound board.

Can you insulate a wall that is already open from a renovation in Fraser?

Yes — open cavities during an Balwin, Bannerman, Belmont renovation are the perfect insulation window before boarding.

Do you insulate basement developments to code in Fraser?

Yes — the R-value your Balwin, Bannerman, Belmont basement needs is what we install, batt plus vapour barrier. We also cover Balwin, Bannerman, Belmont and Northeast.

Do you insulate basement developments to code in Fraser?

Yes — we install batt and vapour barrier to the R-value your Fraser basement development requires. We also cover Balwin, Bannerman, Belmont and Northeast.

Insulation Installation Fraser Edmonton | Batt Insulation

Insulation installation in Fraser, before the drywall goes up

In Fraser the insulation disappears behind board forever, which is why we get it right first: full fill, no compression, proper vapour barrier. In Fraser we install batt and acoustic insulation in walls and ceilings ahead of drywall. Fraser is an established south Edmonton community of 1960s-70s homes where ceiling stipple, settling cracks and dated texture are common, so attic top-ups and wall insulation upgrades are common here alongside basement development, since original insulation levels are often below current standards. We cover Fraser, Balwin, Bannerman, Belmont and Northeast, 7 days a week.

Pre-drywall insulation for Fraser builds and renos
Full cavity fill on Fraser walls — no gaps, no compression
Insulating Balwin, Bannerman, Belmont walls before construction and reno board goes up
Basement development insulation to code
Fraser cavities filled complete — zero gaps or compression
Fraser coverage — we come to you
Balwin, Bannerman, Belmont coverage — we come to you

Why Fraser homeowners trust Emplastrum for insulation installation in Edmonton

Done right because it gets covered up

Insulation is invisible once the drywall goes on in an Balwin, Bannerman, Belmont home, so we treat it with the same care as the finish you will actually see — full fill, sealed vapour barrier, no shortcuts.

Fixed price, same-day reply

We cover Balwin, Bannerman, Belmont and Northeast, 7 days a week. For Balwin, Bannerman, Belmont homeowners: free quote, fixed number, backed workmanship.

Fraser drywall in context

About Fraser

Named for John Fraser, an original homesteader in the area and one of the first trustees of the Belmont School, Fraser is located in the City's far northwest.

What we see in Fraser

In Fraser the drywall work is popcorn and stipple ceiling removal, settling+truss-uplift cracks, nail pops, Poly-B repipe patching repipe patching. We confirm what your home actually needs on site, in writing, before anything starts.

Our Fraser insulation installation process in Edmonton, step by step

Full cavity fill, no shortcuts

We cut and fit batt insulation to fill each stud or joist cavity completely in your Balwin, Bannerman, Belmont home — a gap or a compressed corner is where heat loss and sound leak through.

Vapour barrier and drywall-ready

Where the assembly calls for it, we install vapour barrier over the insulation, sealed at the edges, then leave the wall ready for drywall to go straight on. See our basement drywall work in Balwin, Bannerman, Belmont for what comes next.

Attic insulation is a different job

Depth and coverage

An attic is about even depth right out to the eaves, with baffles keeping the soffit vents clear and the ceiling below sealed.

Why we separate it

It uses different products and different equipment from wall work. We quote it separately rather than folding it into a wall price, because the two are only related by the word insulation.

Filling the cavity completely

Gaps cost more than they look

A batt with a gap at the top of the bay creates a convection path where air circulates inside the wall, moving heat across it.

What good installation looks like

Full width, full depth, in contact on all sides, cut around obstructions rather than compressed past them. In an Fraser wall the difference between a careful fit and a fast one is invisible once boarded and obvious on the heating bill.

Vapour control comes after, and only once

Order and position

The barrier goes on the warm side of the insulation, after the insulation is complete and checked.

Never two

A second barrier on the cold side traps moisture between them with no way to dry. It is a genuine mistake we still find in renovated Fraser walls, and it is invisible until the damage shows.

Basements, and why they are not like upper floors

Concrete changes everything

An Fraser foundation wall is cold and can carry ground moisture. Insulation pressed straight against it sits where moisture cannot dry.

The right assembly

The framing is held off the concrete or a rigid layer goes on first, so the cavity insulation stays on the warm side. Getting the order wrong is the usual reason a finished basement smells musty in year two.

How it works

Simple, clean, on schedule — Insulation Installation in Fraser Edmonton

Free quote

We come out to your Fraser Edmonton property, take a real look at the insulation installation, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every insulation installation quote in Fraser Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the insulation installation in Fraser Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Fraser Edmonton home while we finish the insulation installation to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished insulation installation with us and you're happy with the result in Fraser Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the insulation installation contractor Fraser Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your insulation installation project in Fraser Edmonton.

Read our reviews on Google

FAQ — Insulation Installation Fraser Edmonton

Insulation Installation Fraser Edmonton: your questions answered

Is attic insulation part of the same job?: Related but different — different products, different equipment, and it is about even depth to the eaves with baffles and a sealed ceiling below. We quote it separately rather than folding it into a wall price.
Can you install acoustic insulation for sound control in Fraser?: Yes — acoustic batt in the Fraser wall cavity, paired with resilient channel and sound board, is part of our soundproofing work.
Is sound-control insulation available for Fraser walls?: Yes — Balwin, Bannerman, Belmont soundproofing assemblies pair cavity acoustic batt with channel and sound board.
Can you insulate a wall that is already open from a renovation in Fraser?: Yes — open cavities during an Balwin, Bannerman, Belmont renovation are the perfect insulation window before boarding.
Do you insulate basement developments to code in Fraser?: Yes — the R-value your Balwin, Bannerman, Belmont basement needs is what we install, batt plus vapour barrier. We also cover Balwin, Bannerman, Belmont and Northeast.
Do you insulate basement developments to code in Fraser?: Yes — we install batt and vapour barrier to the R-value your Fraser basement development requires. We also cover Balwin, Bannerman, Belmont and Northeast.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Insulation

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Insulation Installation Fraser Edmonton

Insulation installation in Fraser, before the drywall goes up