Do you also do the drywall after insulation in Northmount?

Yes — we insulate and drywall Northmount projects as one job, or insulate only ahead of your own crew.

Is sound-control insulation available for Northmount walls?

Yes — Albany, Athlone, Baranow soundproofing assemblies pair cavity acoustic batt with channel and sound board.

Is insulation enough on its own?

No. It slows heat conduction but does nothing to stop air moving through gaps, and in an Alberta winter that air carries heat and moisture. A full cavity behind an unsealed top plate performs far below its rating.

Do you handle acoustic insulation on Northmount jobs?

Yes — we run acoustic batt inside Northmount cavities alongside resilient channel and sound board in our soundproofing builds.

Can you install acoustic insulation for sound control in Northmount?

Yes — acoustic batt in the Northmount wall cavity, paired with resilient channel and sound board, is part of our soundproofing work.

Will it help with noise between rooms?

Yes, noticeably for airborne noise, even when the job was about temperature. If a bedroom or office wall is open anyway, upgrading that cavity to a denser batt costs little extra.

Insulation Installation Northmount Edmonton | Batt Insulation

Insulation in Northmount, installed to fill the cavity properly

In Northmount the insulation disappears behind board forever, which is why we get it right first: full fill, no compression, proper vapour barrier. In Northmount we install batt and acoustic insulation in walls and ceilings ahead of drywall. Northmount is an established south Edmonton community of 1960s-70s homes where ceiling stipple, settling cracks and dated texture are common, so attic top-ups and wall insulation upgrades are common here alongside basement development, since original insulation levels are often below current standards. We cover Northmount, Albany, Athlone, Baranow and Northwest, 7 days a week.

Insulating Northmount walls before construction and reno board goes up
Northmount insulation ahead of new construction and renovation drywall
Batt insulation in walls and ceilings in Albany, Athlone, Baranow
Vapour barrier installation where required
No-gap, no-compression cavity fill in Northmount
Acoustic insulation for sound-dampening walls
Batt insulation in walls and ceilings in Northmount

Vapour control comes after, and only once

Order and position

The barrier goes on the warm side of the insulation, after the insulation is complete and checked.

Never two

A second barrier on the cold side traps moisture between them with no way to dry. It is a genuine mistake we still find in renovated Northmount walls, and it is invisible until the damage shows.

Northmount drywall in context

About Northmount

Residential land accounts for almost 70 percent of Northmount.

What we see in Northmount

In Northmount the drywall work is plaster and lath repair, popcorn and stipple ceiling removal, careful patching into original surfaces. We confirm what your home actually needs on site, in writing, before anything starts.

Sound as a secondary benefit

You get some of it free

Filling an interior Northmount partition improves airborne sound between rooms noticeably, even when the job was about temperature.

Upgrading selectively

If a bedroom or office wall is open anyway, a denser acoustic or mineral wool batt in that specific cavity costs little extra. We point out which walls those are while quoting rather than pricing the whole house up.

Basements, and why they are not like upper floors

Concrete changes everything

An Northmount foundation wall is cold and can carry ground moisture. Insulation pressed straight against it sits where moisture cannot dry.

The right assembly

The framing is held off the concrete or a rigid layer goes on first, so the cavity insulation stays on the warm side. Getting the order wrong is the usual reason a finished basement smells musty in year two.

Insulation is only half the assembly

Air movement is the other half

Insulation slows heat conduction. It does nothing to stop air moving through a gap, and in an Northmount winter that air carries both heat and moisture.

Why we look at both

A cavity full of good batts behind an unsealed top plate performs far below its rating. We would rather quote the sealing alongside the insulation than install one and let you believe you bought the other.

Insulation for basements and sound control in Northmount

Basement development

Basement walls and ceilings in Northmount need insulation to code before drywall — we install batt to the required R-value along with vapour barrier on exterior walls.

Acoustic insulation for sound control

Acoustic batt inside a wall cavity is a core part of a real sound-dampening assembly, paired with resilient channel and sound board.

Our Northmount insulation installation process in Edmonton, step by step

Full cavity fill, no shortcuts

We cut and fit batt insulation to fill each stud or joist cavity completely in your Northmount home — a gap or a compressed corner is where heat loss and sound leak through.

Vapour barrier and drywall-ready

Where the assembly calls for it, we install vapour barrier over the insulation, sealed at the edges, then leave the wall ready for drywall to go straight on. See our basement drywall work in Northmount for what comes next.

How it works

Simple, clean, on schedule — Insulation Installation in Northmount Edmonton

Free quote

We come out to your Northmount Edmonton property, take a real look at the insulation installation, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every insulation installation quote in Northmount Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the insulation installation in Northmount Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Northmount Edmonton home while we finish the insulation installation to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished insulation installation with us and you're happy with the result in Northmount Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the insulation installation contractor Northmount Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your insulation installation project in Northmount Edmonton.

Read our reviews on Google

FAQ — Insulation Installation Northmount Edmonton

Insulation Installation Northmount Edmonton: your questions answered

Do you also do the drywall after insulation in Northmount?: Yes — we insulate and drywall Northmount projects as one job, or insulate only ahead of your own crew.
Is sound-control insulation available for Northmount walls?: Yes — Albany, Athlone, Baranow soundproofing assemblies pair cavity acoustic batt with channel and sound board.
Is insulation enough on its own?: No. It slows heat conduction but does nothing to stop air moving through gaps, and in an Alberta winter that air carries heat and moisture. A full cavity behind an unsealed top plate performs far below its rating.
Do you handle acoustic insulation on Northmount jobs?: Yes — we run acoustic batt inside Northmount cavities alongside resilient channel and sound board in our soundproofing builds.
Can you install acoustic insulation for sound control in Northmount?: Yes — acoustic batt in the Northmount wall cavity, paired with resilient channel and sound board, is part of our soundproofing work.
Will it help with noise between rooms?: Yes, noticeably for airborne noise, even when the job was about temperature. If a bedroom or office wall is open anyway, upgrading that cavity to a denser batt costs little extra.

Need Edmonton’s go-to drywall contractor for repair, restoration and finishing? One trusted team for boarding, taping, finishing, repairs & renovations — start to finish.

Your Drywall Contractor in Edmonton →

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Insulation

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Insulation Installation Northmount Edmonton

Insulation in Northmount, installed to fill the cavity properly