Do you install vapour barrier too in Oliver?

Yes — when an Chappelle Area, Heritage Valley Town Centre Area, Keswick Area assembly needs it, we install and seal the vapour barrier before any drywall.

Can you insulate a wall that is already open from a renovation in Oliver?

Yes — an open Oliver wall or ceiling mid-reno is the ideal moment to insulate or upgrade before we close it up.

Is sound-control insulation available for Oliver walls?

Yes — Chappelle Area, Heritage Valley Town Centre Area, Keswick Area soundproofing assemblies pair cavity acoustic batt with channel and sound board.

Do you install vapour barrier too in Oliver?

Yes — where the Oliver assembly calls for it, vapour barrier goes over the insulation, sealed, before drywall.

Why is the floor edge of my basement so cold?

Usually the rim joist — thin, directly exposed and often bare or with a batt tucked loosely against it. It needs air sealing first, then insulating; a loose batt against bare rim joist can trap moist air on cold wood.

Does it matter if the batt is squashed?

Yes. The trapped still air is the entire mechanism, so compressing a batt into a narrow bay costs real performance. We measure the actual Oliver bays and cut to fit rather than forcing standard batts in.

Insulation Installation Oliver Edmonton | Batt Insulation

Batt and acoustic insulation in Oliver before the board

In Oliver the insulation disappears behind board forever, which is why we get it right first: full fill, no compression, proper vapour barrier. In Oliver we install batt and acoustic insulation in walls and ceilings ahead of drywall. Oliver is an Edmonton community with a mix of older homes and newer builds, so insulation calls here range from basement development in the newer homes to attic and wall upgrades in the older ones nearby. We cover Oliver, Chappelle Area, Heritage Valley Town Centre Area, Keswick Area and Edmonton, 7 days a week.

Full cavity fill on Oliver walls — no gaps, no compression
No-gap, no-compression cavity fill in Oliver
Pre-drywall insulation for Oliver builds and renos
Chappelle Area, Heritage Valley Town Centre Area, Keswick Area coverage — we come to you
Insulating Chappelle Area, Heritage Valley Town Centre Area, Keswick Area walls before construction and reno board goes up
Insulating Oliver walls before construction and reno board goes up
No-gap, no-compression cavity fill in Chappelle Area, Heritage Valley Town Centre Area, Keswick Area

Why Oliver homeowners trust Emplastrum for insulation installation in Edmonton

Done right because it gets covered up

Insulation is invisible once the drywall goes on in an Oliver home, so we treat it with the same care as the finish you will actually see — full fill, sealed vapour barrier, no shortcuts.

Fixed price, same-day reply

We cover Oliver and Edmonton, 7 days a week. Free on-site Oliver quotes and fixed prices, and we stand behind the work.

Insulation is only half the assembly

Air movement is the other half

Insulation slows heat conduction. It does nothing to stop air moving through a gap, and in an Oliver winter that air carries both heat and moisture.

Why we look at both

A cavity full of good batts behind an unsealed top plate performs far below its rating. We would rather quote the sealing alongside the insulation than install one and let you believe you bought the other.

Filling the cavity completely

Gaps cost more than they look

A batt with a gap at the top of the bay creates a convection path where air circulates inside the wall, moving heat across it.

What good installation looks like

Full width, full depth, in contact on all sides, cut around obstructions rather than compressed past them. In an Oliver wall the difference between a careful fit and a fast one is invisible once boarded and obvious on the heating bill.

Rim joists and the coldest band in the house

Small area, big loss

The rim joist where the floor framing meets the foundation is thin, directly exposed and usually the worst-performing part of an Oliver basement.

Sealed then insulated

The joint gets air-sealed first, then insulated. A batt tucked loosely against a bare rim joist can trap moist air against cold wood, which is worse than leaving it alone.

Our Oliver insulation installation process in Edmonton, step by step

Full cavity fill, no shortcuts

We cut and fit batt insulation to fill each stud or joist cavity completely in your Chappelle Area, Heritage Valley Town Centre Area, Keswick Area home — a gap or a compressed corner is where heat loss and sound leak through.

Vapour barrier and drywall-ready

Where the assembly calls for it, we install vapour barrier over the insulation, sealed at the edges, then leave the wall ready for drywall to go straight on. See our basement drywall work in Chappelle Area, Heritage Valley Town Centre Area, Keswick Area for what comes next.

Inspection, and being ready for it

Checked before it is covered

Insulation and vapour control in an Oliver build are inspected before drywall covers them.

How we sequence

The work is left visible and boarding waits for the inspection rather than running ahead. Covering something an inspector needs to see costs a wall, not an afternoon, and it is the easiest scheduling mistake to avoid.

How it works

Simple, clean, on schedule — Insulation Installation in Oliver Edmonton

Free quote

We come out to your Oliver Edmonton property, take a real look at the insulation installation, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every insulation installation quote in Oliver Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the insulation installation in Oliver Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Oliver Edmonton home while we finish the insulation installation to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished insulation installation with us and you're happy with the result in Oliver Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the insulation installation contractor Oliver Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your insulation installation project in Oliver Edmonton.

Read our reviews on Google

FAQ — Insulation Installation Oliver Edmonton

Insulation Installation Oliver Edmonton: your questions answered

Do you install vapour barrier too in Oliver?: Yes — when an Chappelle Area, Heritage Valley Town Centre Area, Keswick Area assembly needs it, we install and seal the vapour barrier before any drywall.
Can you insulate a wall that is already open from a renovation in Oliver?: Yes — an open Oliver wall or ceiling mid-reno is the ideal moment to insulate or upgrade before we close it up.
Is sound-control insulation available for Oliver walls?: Yes — Chappelle Area, Heritage Valley Town Centre Area, Keswick Area soundproofing assemblies pair cavity acoustic batt with channel and sound board.
Do you install vapour barrier too in Oliver?: Yes — where the Oliver assembly calls for it, vapour barrier goes over the insulation, sealed, before drywall.
Why is the floor edge of my basement so cold?: Usually the rim joist — thin, directly exposed and often bare or with a batt tucked loosely against it. It needs air sealing first, then insulating; a loose batt against bare rim joist can trap moist air on cold wood.
Does it matter if the batt is squashed?: Yes. The trapped still air is the entire mechanism, so compressing a batt into a narrow bay costs real performance. We measure the actual Oliver bays and cut to fit rather than forcing standard batts in.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Insulation

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Insulation Installation Oliver Edmonton

Batt and acoustic insulation in Oliver before the board