Do you handle acoustic insulation on Hollick-Kenyon jobs?

Yes — we run acoustic batt inside Hollick-Kenyon cavities alongside resilient channel and sound board in our soundproofing builds.

Is sound-control insulation available for Hollick-Kenyon walls?

Yes — Balwin, Bannerman, Belmont soundproofing assemblies pair cavity acoustic batt with channel and sound board.

Is insulation enough on its own?

No. It slows heat conduction but does nothing to stop air moving through gaps, and in an Alberta winter that air carries heat and moisture. A full cavity behind an unsealed top plate performs far below its rating.

Do you insulate basement developments to code in Hollick-Kenyon?

Yes — the R-value your Balwin, Bannerman, Belmont basement needs is what we install, batt plus vapour barrier. We also cover Balwin, Bannerman, Belmont and Northeast.

Do you insulate basement developments to code in Hollick-Kenyon?

Yes — we install batt and vapour barrier to the R-value your Hollick-Kenyon basement development requires. We also cover Balwin, Bannerman, Belmont and Northeast.

Can you insulate a wall that is already open from a renovation in Hollick-Kenyon?

Yes — open cavities during an Balwin, Bannerman, Belmont renovation are the perfect insulation window before boarding.

Insulation Installation Hollick-Kenyon Edmonton | Batt Insulation

Insulation in Hollick-Kenyon, installed to fill the cavity properly

You only get one chance at Hollick-Kenyon insulation before it is buried — full cavity fill, gap-free, uncompressed, with vapour barrier where the assembly calls for it. In Hollick-Kenyon we install batt and acoustic insulation in walls and ceilings ahead of drywall. Hollick-Kenyon is an older Northeast community where settling cracks, aging texture and the occasional plaster repair come up, so attic top-ups and wall insulation upgrades are common here alongside basement development, since original insulation levels are often below current standards. We cover Hollick-Kenyon, Balwin, Bannerman, Belmont and Northeast, 7 days a week.

No-gap, no-compression cavity fill in Hollick-Kenyon
Insulating Hollick-Kenyon walls before construction and reno board goes up
Full cavity fill on Hollick-Kenyon walls — no gaps, no compression
Balwin, Bannerman, Belmont coverage — we come to you
Pre-drywall insulation for Hollick-Kenyon builds and renos
No-gap, no-compression cavity fill in Balwin, Bannerman, Belmont
Hollick-Kenyon coverage — we come to you

Rim joists and the coldest band in the house

Small area, big loss

The rim joist where the floor framing meets the foundation is thin, directly exposed and usually the worst-performing part of an Hollick-Kenyon basement.

Sealed then insulated

The joint gets air-sealed first, then insulated. A batt tucked loosely against a bare rim joist can trap moist air against cold wood, which is worse than leaving it alone.

Hollick-Kenyon drywall in context

About Hollick-Kenyon

The neighbourhood was named after Herbert "Bertie" Hollick-Kenyon, who piloted flights over the Antarctic as part of the first mapping of that territory.

What we see in Hollick-Kenyon

In Hollick-Kenyon the drywall work is first-year settling, basement dev for first owners, Level 5 over builder-grade. We confirm what your home actually needs on site, in writing, before anything starts.

Our Hollick-Kenyon insulation installation process in Edmonton, step by step

Full cavity fill, no shortcuts

We cut and fit batt insulation to fill each stud or joist cavity completely in your Hollick-Kenyon home — a gap or a compressed corner is where heat loss and sound leak through.

Vapour barrier and drywall-ready

Where the assembly calls for it, we install vapour barrier over the insulation, sealed at the edges, then leave the wall ready for drywall to go straight on. See our basement drywall work in Hollick-Kenyon for what comes next.

Common insulation situations in Hollick-Kenyon

In Hollick-Kenyon, hollick-Kenyon sits in Edmonton's Northeast district. The neighbourhood was named after Herbert "Bertie" Hollick-Kenyon, who piloted flights over the Antarctic as part of the first mapping of that territory. Across roughly 2,120 homes here, the drywall work is first-year settling, basement dev for first owners, Level 5 over builder-grade. We cover Hollick-Kenyon and the surrounding Northeast district, 7 days a week. Same trusted team, same process on every job — on-site quote, fixed price, no surprises.

What affects the cost of insulation installation in Hollick-Kenyon in Edmonton?

Area, R-value and vapour barrier

Insulation cost in Balwin, Bannerman, Belmont depends on the wall and ceiling area, the R-value or acoustic spec required, and whether vapour barrier needs to be installed. We measure the space and give a fixed price before we start.

Typical insulation work in Balwin, Bannerman, Belmont homes

Attic top-ups and wall insulation upgrades are common here alongside basement development, since original insulation levels are often below current standards.

Insulation for basements and sound control in Hollick-Kenyon

Basement development

Basement walls and ceilings in Hollick-Kenyon need insulation to code before drywall — we install batt to the required R-value along with vapour barrier on exterior walls.

Acoustic insulation for sound control

Acoustic batt inside a wall cavity is a core part of a real sound-dampening assembly, paired with resilient channel and sound board.

Why Hollick-Kenyon homeowners trust Emplastrum for insulation installation in Edmonton

Done right because it gets covered up

Insulation is invisible once the drywall goes on in an Hollick-Kenyon home, so we treat it with the same care as the finish you will actually see — full fill, sealed vapour barrier, no shortcuts.

Fixed price, same-day reply

We cover Hollick-Kenyon and Northeast, 7 days a week. Free on-site Hollick-Kenyon quotes and fixed prices, and we stand behind the work.

How it works

Simple, clean, on schedule — Insulation Installation in Hollick Kenyon Edmonton

Free quote

We come out to your Hollick Kenyon Edmonton property, take a real look at the insulation installation, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every insulation installation quote in Hollick Kenyon Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the insulation installation in Hollick Kenyon Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Hollick Kenyon Edmonton home while we finish the insulation installation to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished insulation installation with us and you're happy with the result in Hollick Kenyon Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the insulation installation contractor Hollick Kenyon Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your insulation installation project in Hollick Kenyon Edmonton.

Read our reviews on Google

FAQ — Insulation Installation Hollick-Kenyon Edmonton

Insulation Installation Hollick-Kenyon Edmonton: your questions answered

Do you handle acoustic insulation on Hollick-Kenyon jobs?: Yes — we run acoustic batt inside Hollick-Kenyon cavities alongside resilient channel and sound board in our soundproofing builds.
Is sound-control insulation available for Hollick-Kenyon walls?: Yes — Balwin, Bannerman, Belmont soundproofing assemblies pair cavity acoustic batt with channel and sound board.
Is insulation enough on its own?: No. It slows heat conduction but does nothing to stop air moving through gaps, and in an Alberta winter that air carries heat and moisture. A full cavity behind an unsealed top plate performs far below its rating.
Do you insulate basement developments to code in Hollick-Kenyon?: Yes — the R-value your Balwin, Bannerman, Belmont basement needs is what we install, batt plus vapour barrier. We also cover Balwin, Bannerman, Belmont and Northeast.
Do you insulate basement developments to code in Hollick-Kenyon?: Yes — we install batt and vapour barrier to the R-value your Hollick-Kenyon basement development requires. We also cover Balwin, Bannerman, Belmont and Northeast.
Can you insulate a wall that is already open from a renovation in Hollick-Kenyon?: Yes — open cavities during an Balwin, Bannerman, Belmont renovation are the perfect insulation window before boarding.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Insulation

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Insulation Installation Hollick-Kenyon Edmonton

Insulation in Hollick-Kenyon, installed to fill the cavity properly