What type of drywall do you use for exterior basement walls in Edmonton?

Moisture-resistant (green board or purple board) on all walls against the exterior foundation and around plumbing and laundry. For Hollick-Kenyon interior partitions clear of moisture, standard 1/2” drywall is the right product. For legal suites, 5/8” Type X fire-rated on the ceiling and soundproof board on party walls. We specify before we start.

How do you handle texture matching after basement drywall work in Hollick-Kenyon?

Texture matching is part of every repair and patch job we do in Hollick-Kenyon. Whether the surrounding surface is knockdown, smooth or an older pattern, we match it so the repair is not visible under paint.

Do you do basement drywall in Hollick-Kenyon?

Yes — basement development in Hollick-Kenyon is part of our regular work, and we book to your project. We also cover Balwin, Bannerman, Belmont and Northeast.

How long does basement drywall take in a Hollick-Kenyon home?

Expect two to four Hollick-Kenyon boarding days plus two to three finishing days — drying time between mud coats is non-negotiable. The extra partitions and rated board of a Hollick-Kenyon suite conversion stretch the timeline. Honest scheduling in Hollick-Kenyon: the quoted timeline is the real one.

Do you take Hollick-Kenyon basement finishing to Level 5?

Where the paint spec calls for it, yes — most basements finish well at Level 4, and we tell you honestly which your Hollick-Kenyon project needs.

Do you do legal suite basement drywall in Edmonton?

Yes, and we know the spec. Edmonton legal suites require 5/8” Type X fire-rated board on the ceiling separating the suite from the floor above, and STC-rated soundproof board on the party walls between the suite and the main living space. That spec is how we board Hollick-Kenyon suites — and how they pass inspection.

Basement Drywall Hollick-Kenyon Edmonton | Basement Dev

Basement drywall in Hollick-Kenyon boarded, taped and finished right

We finish basements in Hollick-Kenyon homes — boarding the framing, specifying the right board type for each surface, taping and mudding every joint and corner to Level 4, and leaving the space paint-ready. Hollick-Kenyon homes from the 2000s and 2010s are larger, higher-end Northeast homes where basement development is expected to match the finish quality of the main floors. We cover Hollick-Kenyon, Balwin, Bannerman, Belmont and the surrounding area, 7 days a week.

Fire-rated and soundproof board for legal suites
Bulkheads, soffits and mechanical room boarding
Bulkheads, soffits, mechanical chases and custom ceiling work
Hollick-Kenyon foundation walls and plumbing runs get moisture-resistant board
Soundproof board between an Hollick-Kenyon legal suite and the main floor
Bulkheads, soffits, mechanical chases and ceiling work
The Hollick-Kenyon suite boundary gets soundproof board

Types of Basement Drywall work in Hollick-Kenyon in Edmonton

New installs, renovation work and repair in Hollick-Kenyon

We handle the full range of basement drywall work in Hollick-Kenyon — from brand-new basement boarding and taping to single-room renovation patches and targeted repair work. Every job gets the same Level 4 standard and fixed price commitment.

Legal suites and multi-use spaces in Hollick-Kenyon

Legal suite work in Hollick-Kenyon requires specific board specs: fire-rated on the suite ceiling, soundproof on party walls, moisture-resistant in wet areas. We confirm the spec before we start and board to it.

Hollick-Kenyon drywall in context

About Hollick-Kenyon

The neighbourhood was named after Herbert "Bertie" Hollick-Kenyon, who piloted flights over the Antarctic as part of the first mapping of that territory.

What we see in Hollick-Kenyon

In Hollick-Kenyon the drywall work is first-year settling, basement dev for first owners, Level 5 over builder-grade. We confirm what your home actually needs on site, in writing, before anything starts.

Our Hollick-Kenyon basement drywall process in Edmonton, step by step

Board to spec

In Hollick-Kenyon we board ceiling first, then walls, with moisture-resistant board on every exterior foundation wall and fire-rated or soundproof board where a suite is involved.

Tape, mud and finish

We tape the Hollick-Kenyon basement, apply mud coats with full drying time, then sand to a flat Level 4 or 5, checking under light before the paint hand-off.

Our Hollick-Kenyon basement drywall process in Edmonton, step by step

Board to spec

In Balwin, Bannerman, Belmont we board ceiling first, then walls, with moisture-resistant board on every exterior foundation wall and fire-rated or soundproof board where a suite is involved.

The finish stage

In Balwin, Bannerman, Belmont we tape, build mud coats with real drying time, sand flat to Level 4 or 5 and verify under light before handing off for paint.

Basement Drywall work we do in Hollick-Kenyon in Edmonton

Finishing an unfinished basement in a 1960s and 1970s Hollick-Kenyon home

A significant number of Hollick-Kenyon homes from the 1960s and 1970s have basements that were never finished, or were finished to a rough standard. We assess the framing, check for moisture, spec the right board for each surface and board, tape and mud the entire space to Level 4. We leave the basement paint-ready so the homeowner can move straight to flooring and paint.

Legal suite conversions in Hollick-Kenyon — boarding to code

Secondary suite conversions in Hollick-Kenyon homes from the 1960s and 1970s are one of the most common basement drywall calls we handle. The conversion requires 5/8” Type X fire-rated board on the ceiling between the suite and the floor above, soundproof board on party walls, and moisture-resistant board in any bathroom or laundry area. We board to the Edmonton spec and the suite passes inspection without a callback.

What affects the cost of basement drywall in Hollick-Kenyon in Edmonton?

Size, board spec and finish level

The cost in Balwin, Bannerman, Belmont depends on the square footage, the board spec (moisture-resistant on exterior walls, fire-rated and soundproof if there is a suite), and the finish level. We price off the layout and a site look.

Basement development in Balwin, Bannerman, Belmont

Basement development is a steady call here, and we put the right board where the plan and code require it.

Our Edmonton basement drywall process in Edmonton, step by step

Board selection before we start — right product for every surface

Basement drywall in Edmonton is not one-product-fits-all. Exterior foundation walls need moisture-resistant board. Any wall touching a bathroom or laundry needs moisture-resistant. If there is a legal suite below or above, the ceiling and party walls need fire-rated. STC-rated soundproof board between the suite and the main living area reduces noise transmission significantly. We specify the right product for each surface before we pull the first sheet — not after the inspector flags it.

Boarding, taping and mudding in Edmonton basements

Once the right board is on the right surfaces, every seam, inside corner, outside corner and fastener head gets taped and mudded to Level 4 — three coats, proper drying time between each, sanded flat. Basement ceilings in Edmonton homes often have bulkheads for HVAC, beams and posts that need framing around them. We tape all of that to the same standard as the walls. When we leave, the basement looks the same quality from floor to ceiling.

How it works

Simple, clean, on schedule — Basement Drywall in Hollick Kenyon Edmonton

Free quote

We come out to your Hollick Kenyon Edmonton property, take a real look at the basement drywall, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every basement drywall quote in Hollick Kenyon Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the basement drywall in Hollick Kenyon Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Hollick Kenyon Edmonton home while we finish the basement drywall to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished basement drywall with us and you're happy with the result in Hollick Kenyon Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the basement drywall contractor Hollick Kenyon Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your basement drywall project in Hollick Kenyon Edmonton.

Read our reviews on Google

FAQ — Basement Drywall Hollick-Kenyon Edmonton

Basement Drywall Hollick-Kenyon Edmonton: your questions answered

What type of drywall do you use for exterior basement walls in Edmonton?: Moisture-resistant (green board or purple board) on all walls against the exterior foundation and around plumbing and laundry. For Hollick-Kenyon interior partitions clear of moisture, standard 1/2” drywall is the right product. For legal suites, 5/8” Type X fire-rated on the ceiling and soundproof board on party walls. We specify before we start.
How do you handle texture matching after basement drywall work in Hollick-Kenyon in Edmonton?: Texture matching is part of every repair and patch job we do in Hollick-Kenyon. Whether the surrounding surface is knockdown, smooth or an older pattern, we match it so the repair is not visible under paint.
Do you do basement drywall in Hollick-Kenyon in Edmonton?: Yes — basement development in Hollick-Kenyon is part of our regular work, and we book to your project. We also cover Balwin, Bannerman, Belmont and Northeast.
How long does basement drywall take in a Hollick-Kenyon home in Edmonton?: Expect two to four Hollick-Kenyon boarding days plus two to three finishing days — drying time between mud coats is non-negotiable. The extra partitions and rated board of a Hollick-Kenyon suite conversion stretch the timeline. Honest scheduling in Hollick-Kenyon: the quoted timeline is the real one.
Do you take Hollick-Kenyon basement finishing to Level 5?: Where the paint spec calls for it, yes — most basements finish well at Level 4, and we tell you honestly which your Hollick-Kenyon project needs.
Do you do legal suite basement drywall in Edmonton in Edmonton?: Yes, and we know the spec. Edmonton legal suites require 5/8” Type X fire-rated board on the ceiling separating the suite from the floor above, and STC-rated soundproof board on the party walls between the suite and the main living space. That spec is how we board Hollick-Kenyon suites — and how they pass inspection.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Basement Drywall Hollick-Kenyon Edmonton

Basement drywall in Hollick-Kenyon boarded, taped and finished right