Will you install acoustic batt in an Callaghan home?

Yes — cavity batt plus resilient channel plus sound board — the Callaghan soundproofing combination we install.

Can you insulate a wall that is already open from a renovation in Callaghan?

Yes — an open Callaghan wall or ceiling mid-reno is the ideal moment to insulate or upgrade before we close it up.

Do you also do the drywall after insulation in Callaghan?

Yes — we insulate and drywall Callaghan projects as one job, or insulate only ahead of your own crew.

Do you insulate basement developments to code in Callaghan?

Yes — we install batt and vapour barrier to the R-value your Callaghan basement development requires. We also cover Allard, Ambleside, Blackburne and Southwest.

Can you insulate a wall that is already open from a renovation in Callaghan?

Yes — open cavities during an Allard, Ambleside, Blackburne renovation are the perfect insulation window before boarding.

Insulation Installation Callaghan Edmonton | Batt Insulation

Insulation installation in Allard, Ambleside, Blackburne, before the drywall goes up

In Allard, Ambleside, Blackburne the insulation disappears behind board forever, which is why we get it right first: full fill, no compression, proper vapour barrier. In Allard, Ambleside, Blackburne we install batt and acoustic insulation in walls and ceilings ahead of drywall. Allard, Ambleside, Blackburne is an older Southwest community where settling cracks, aging texture and the occasional plaster repair come up, so attic top-ups and wall insulation upgrades are common here alongside basement development, since original insulation levels are often below current standards. We cover Allard, Ambleside, Blackburne and Southwest, 7 days a week.

Vapour barrier installation where required
Batt insulation in walls and ceilings in Allard, Ambleside, Blackburne
Acoustic insulation for sound-dampening walls
Basement development insulation to code
Batt insulation in walls and ceilings in Callaghan
Callaghan insulation ahead of new construction and renovation drywall
Insulating Allard, Ambleside, Blackburne walls before construction and reno board goes up

Our Callaghan insulation installation process in Edmonton, step by step

Full cavity fill, no shortcuts

We cut and fit batt insulation to fill each stud or joist cavity completely in your Callaghan home — a gap or a compressed corner is where heat loss and sound leak through.

Vapour barrier and drywall-ready

Where the assembly calls for it, we install vapour barrier over the insulation, sealed at the edges, then leave the wall ready for drywall to go straight on. See our basement drywall work in Callaghan for what comes next.

Insulation for basements and sound control in Callaghan

Basement development

Basement walls and ceilings in Allard, Ambleside, Blackburne need insulation to code before drywall — we install batt to the required R-value along with vapour barrier on exterior walls.

Acoustic insulation for sound control

Acoustic batt inside a wall cavity is a core part of a real sound-dampening assembly, paired with resilient channel and sound board.

Why Callaghan homeowners trust Emplastrum for insulation installation in Edmonton

Done right because it gets covered up

Insulation is invisible once the drywall goes on in an Callaghan home, so we treat it with the same care as the finish you will actually see — full fill, sealed vapour barrier, no shortcuts.

Fixed price, same-day reply

We cover Callaghan and Southwest, 7 days a week. Free on-site Callaghan quotes and fixed prices, and we stand behind the work.

Insulation for basements and sound control in Callaghan

Basement development

Basement walls and ceilings in Callaghan need insulation to code before drywall — we install batt to the required R-value along with vapour barrier on exterior walls.

Acoustic insulation for sound control

Acoustic batt inside a wall cavity is a core part of a real sound-dampening assembly, paired with resilient channel and sound board.

Basements, and why they are not like upper floors

Concrete changes everything

An Callaghan foundation wall is cold and can carry ground moisture. Insulation pressed straight against it sits where moisture cannot dry.

The right assembly

The framing is held off the concrete or a rigid layer goes on first, so the cavity insulation stays on the warm side. Getting the order wrong is the usual reason a finished basement smells musty in year two.

Compression, and why wider is not better

The trapped air does the work

Squashing a batt into a narrow bay reduces the still air it holds, which is the entire mechanism.

Measure first

Callaghan framing is not always at standard spacing, especially in renovations and older homes. Batts get cut to the actual bay rather than forced, which is slower and is the difference between paying for a rating and getting one.

How it works

Simple, clean, on schedule — Insulation Installation in Callaghan Edmonton

Free quote

We come out to your Callaghan Edmonton property, take a real look at the insulation installation, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every insulation installation quote in Callaghan Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the insulation installation in Callaghan Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Callaghan Edmonton home while we finish the insulation installation to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished insulation installation with us and you're happy with the result in Callaghan Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the insulation installation contractor Callaghan Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your insulation installation project in Callaghan Edmonton.

Read our reviews on Google

FAQ — Insulation Installation Callaghan Edmonton

Insulation Installation Callaghan Edmonton: your questions answered

Will you install acoustic batt in an Callaghan home?: Yes — cavity batt plus resilient channel plus sound board — the Callaghan soundproofing combination we install.
Can you insulate a wall that is already open from a renovation in Callaghan?: Yes — an open Callaghan wall or ceiling mid-reno is the ideal moment to insulate or upgrade before we close it up.
Can insulation go straight against the concrete?: No. That puts it where moisture cannot dry. The framing is held off the concrete or a rigid layer goes on first so the cavity insulation stays on the warm side. Getting that wrong is why finished basements smell musty.
Do you also do the drywall after insulation in Callaghan?: Yes — we insulate and drywall Callaghan projects as one job, or insulate only ahead of your own crew.
Do you insulate basement developments to code in Callaghan?: Yes — we install batt and vapour barrier to the R-value your Callaghan basement development requires. We also cover Allard, Ambleside, Blackburne and Southwest.
Can you insulate a wall that is already open from a renovation in Callaghan?: Yes — open cavities during an Allard, Ambleside, Blackburne renovation are the perfect insulation window before boarding.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Insulation

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Insulation Installation Callaghan Edmonton

Insulation installation in Allard, Ambleside, Blackburne, before the drywall goes up