Is attic insulation part of the same job?

Related but different — different products, different equipment, and it is about even depth to the eaves with baffles and a sealed ceiling below. We quote it separately rather than folding it into a wall price.

Will you install acoustic batt in an Calder home?

Yes — cavity batt plus resilient channel plus sound board — the Calder soundproofing combination we install.

Can you install acoustic insulation for sound control in Calder?

Yes — acoustic batt in the Calder wall cavity, paired with resilient channel and sound board, is part of our soundproofing work.

Is sound-control insulation available for Calder walls?

Yes — Calder soundproofing assemblies pair cavity acoustic batt with channel and sound board.

Do you also do the drywall after insulation in Calder?

Yes — take the full Albany, Athlone, Baranow package or just the insulation stage ahead of your own boarders.

Is insulation enough on its own?

No. It slows heat conduction but does nothing to stop air moving through gaps, and in an Alberta winter that air carries heat and moisture. A full cavity behind an unsealed top plate performs far below its rating.

Insulation Installation Calder Edmonton | Batt Insulation

Insulation installation in Calder, before the drywall goes up

You only get one chance at Calder insulation before it is buried — full cavity fill, gap-free, uncompressed, with vapour barrier where the assembly calls for it. In Calder we install batt and acoustic insulation in walls and ceilings ahead of drywall. Calder is an Northwest community with a mix of older homes and newer builds, so insulation calls here range from basement development in the newer homes to attic and wall upgrades in the older ones nearby. We cover Calder, Albany, Athlone, Baranow and Northwest, 7 days a week.

Pre-drywall insulation for Calder builds and renos
Insulating Calder walls before construction and reno board goes up
Batt insulation in walls and ceilings in Albany, Athlone, Baranow
Acoustic insulation for sound-dampening walls
Full cavity fill on Calder walls — no gaps, no compression
Vapour barrier installation where required
Calder cavities filled complete — zero gaps or compression

Insulation for basements and sound control in Calder

Basement development

Basement walls and ceilings in Albany, Athlone, Baranow need insulation to code before drywall — we install batt to the required R-value along with vapour barrier on exterior walls.

Acoustic insulation for sound control

Acoustic batt inside a wall cavity is a core part of a real sound-dampening assembly, paired with resilient channel and sound board.

Calder drywall in context

About Calder

In the early part of the 20th century, Calder was part of the Hudson's Bay Company Reserve and settled primarily by employees of the Grand Trunk Pacific Railway.

What we see in Calder

In Calder the drywall work is plaster and lath repair, popcorn and stipple ceiling removal, careful patching into original surfaces. We confirm what your home actually needs on site, in writing, before anything starts.

Common insulation situations in Calder

In Calder, calder sits in Edmonton's Northwest district. In the early part of the 20th century, Calder was part of the Hudson's Bay Company Reserve and settled primarily by employees of the Grand Trunk Pacific Railway. Across roughly 1,730 homes here, the drywall work is plaster and lath repair, popcorn and stipple ceiling removal, careful patching into original surfaces. We cover Calder and the surrounding Northwest district, 7 days a week. That is the standard on every job here, big or small — on-site quote, fixed price.

Vapour control comes after, and only once

Order and position

The barrier goes on the warm side of the insulation, after the insulation is complete and checked.

Never two

A second barrier on the cold side traps moisture between them with no way to dry. It is a genuine mistake we still find in renovated Calder walls, and it is invisible until the damage shows.

Insulation is only half the assembly

Air movement is the other half

Insulation slows heat conduction. It does nothing to stop air moving through a gap, and in an Calder winter that air carries both heat and moisture.

Why we look at both

A cavity full of good batts behind an unsealed top plate performs far below its rating. We would rather quote the sealing alongside the insulation than install one and let you believe you bought the other.

Filling the cavity completely

Gaps cost more than they look

A batt with a gap at the top of the bay creates a convection path where air circulates inside the wall, moving heat across it.

What good installation looks like

Full width, full depth, in contact on all sides, cut around obstructions rather than compressed past them. In an Calder wall the difference between a careful fit and a fast one is invisible once boarded and obvious on the heating bill.

Why Calder homeowners trust Emplastrum for insulation installation in Edmonton

Done right because it gets covered up

Insulation is invisible once the drywall goes on in an Albany, Athlone, Baranow home, so we treat it with the same care as the finish you will actually see — full fill, sealed vapour barrier, no shortcuts.

Fixed price, same-day reply

We cover Albany, Athlone, Baranow and Northwest, 7 days a week. For Albany, Athlone, Baranow homeowners: free quote, fixed number, backed workmanship.

How it works

Simple, clean, on schedule — Insulation Installation in Calder Edmonton

Free quote

We come out to your Calder Edmonton property, take a real look at the insulation installation, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every insulation installation quote in Calder Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the insulation installation in Calder Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Calder Edmonton home while we finish the insulation installation to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished insulation installation with us and you're happy with the result in Calder Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the insulation installation contractor Calder Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your insulation installation project in Calder Edmonton.

Read our reviews on Google

FAQ — Insulation Installation Calder Edmonton

Insulation Installation Calder Edmonton: your questions answered

Is attic insulation part of the same job?: Related but different — different products, different equipment, and it is about even depth to the eaves with baffles and a sealed ceiling below. We quote it separately rather than folding it into a wall price.
Will you install acoustic batt in an Calder home?: Yes — cavity batt plus resilient channel plus sound board — the Calder soundproofing combination we install.
Can you install acoustic insulation for sound control in Calder?: Yes — acoustic batt in the Calder wall cavity, paired with resilient channel and sound board, is part of our soundproofing work.
Is sound-control insulation available for Calder walls?: Yes — Calder soundproofing assemblies pair cavity acoustic batt with channel and sound board.
Do you also do the drywall after insulation in Calder?: Yes — take the full Albany, Athlone, Baranow package or just the insulation stage ahead of your own boarders.
Is insulation enough on its own?: No. It slows heat conduction but does nothing to stop air moving through gaps, and in an Alberta winter that air carries heat and moisture. A full cavity behind an unsealed top plate performs far below its rating.

Need Edmonton’s go-to drywall contractor for repair, restoration and finishing? One trusted team for boarding, taping, finishing, repairs & renovations — start to finish.

Your Drywall Contractor in Edmonton →

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Insulation

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Insulation Installation Calder Edmonton

Insulation installation in Calder, before the drywall goes up