Why is the floor edge of my basement so cold?

Usually the rim joist — thin, directly exposed and often bare or with a batt tucked loosely against it. It needs air sealing first, then insulating; a loose batt against bare rim joist can trap moist air on cold wood.

Does it matter if the batt is squashed?

Yes. The trapped still air is the entire mechanism, so compressing a batt into a narrow bay costs real performance. We measure the actual Kilkenny bays and cut to fit rather than forcing standard batts in.

Will it help with noise between rooms?

Yes, noticeably for airborne noise, even when the job was about temperature. If a bedroom or office wall is open anyway, upgrading that cavity to a denser batt costs little extra.

Can you insulate a wall that is already open from a renovation in Kilkenny?

Yes — open cavities during an Balwin, Bannerman, Belmont renovation are the perfect insulation window before boarding.

Do you insulate basement developments to code in Kilkenny?

Yes — the R-value your Balwin, Bannerman, Belmont basement needs is what we install, batt plus vapour barrier. We also cover Balwin, Bannerman, Belmont and Northeast.

Can you install acoustic insulation for sound control in Kilkenny?

Yes — acoustic batt in the Kilkenny wall cavity, paired with resilient channel and sound board, is part of our soundproofing work.

Insulation Installation Kilkenny Edmonton | Batt Insulation

Insulation installation in Balwin, Bannerman, Belmont, before the drywall goes up

Insulation is the step that gets covered and forgotten in Kilkenny — exactly why it must be right the first time: full cavity fill, no gaps or compression, vapour barrier where needed. In Kilkenny we install batt and acoustic insulation in walls and ceilings ahead of drywall. Kilkenny is this established Northeast community where reno, repair and ceiling drywall are common, so basement development and the occasional upgrade where older insulation has settled or thinned are common here. We cover Kilkenny, Balwin, Bannerman, Belmont and Northeast, 7 days a week.

Acoustic insulation for sound-dampening walls
No-gap, no-compression cavity fill in Kilkenny
The insulation stage before Kilkenny new-build and reno drywall
Insulating Kilkenny walls before construction and reno board goes up
No-gap, no-compression cavity fill in Balwin, Bannerman, Belmont
Vapour barrier installation where required
Pre-drywall insulation for Kilkenny builds and renos

Insulation is only half the assembly

Air movement is the other half

Insulation slows heat conduction. It does nothing to stop air moving through a gap, and in an Kilkenny winter that air carries both heat and moisture.

Why we look at both

A cavity full of good batts behind an unsealed top plate performs far below its rating. We would rather quote the sealing alongside the insulation than install one and let you believe you bought the other.

Kilkenny drywall in context

About Kilkenny

Kilkenny lies to the City's far north, snuggled up against farms and forest.

What we see in Kilkenny

In Kilkenny the drywall work is plaster and lath repair, popcorn and stipple ceiling removal, careful patching into original surfaces. We confirm what your home actually needs on site, in writing, before anything starts.

Inspection, and being ready for it

Checked before it is covered

Insulation and vapour control in an Kilkenny build are inspected before drywall covers them.

How we sequence

The work is left visible and boarding waits for the inspection rather than running ahead. Covering something an inspector needs to see costs a wall, not an afternoon, and it is the easiest scheduling mistake to avoid.

Common insulation situations in Kilkenny

In Kilkenny, kilkenny sits in Edmonton's Northeast district. Kilkenny lies to the City's far north, snuggled up against farms and forest. Across roughly 2,075 homes here, the drywall work is plaster and lath repair, popcorn and stipple ceiling removal, careful patching into original surfaces. We cover Kilkenny and the surrounding Northeast district, 7 days a week. One fixed price after an honest on-site look, and the job done right the first time.

Why Kilkenny homeowners trust Emplastrum for insulation installation in Edmonton

Done right because it gets covered up

Insulation is invisible once the drywall goes on in an Kilkenny home, so we treat it with the same care as the finish you will actually see — full fill, sealed vapour barrier, no shortcuts.

Fixed price, same-day reply

We cover Kilkenny and Northeast, 7 days a week. Free on-site Kilkenny quotes and fixed prices, and we stand behind the work.

Compression, and why wider is not better

The trapped air does the work

Squashing a batt into a narrow bay reduces the still air it holds, which is the entire mechanism.

Measure first

Kilkenny framing is not always at standard spacing, especially in renovations and older homes. Batts get cut to the actual bay rather than forced, which is slower and is the difference between paying for a rating and getting one.

Basements, and why they are not like upper floors

Concrete changes everything

An Kilkenny foundation wall is cold and can carry ground moisture. Insulation pressed straight against it sits where moisture cannot dry.

The right assembly

The framing is held off the concrete or a rigid layer goes on first, so the cavity insulation stays on the warm side. Getting the order wrong is the usual reason a finished basement smells musty in year two.

How it works

Simple, clean, on schedule — Insulation Installation in Kilkenny Edmonton

Free quote

We come out to your Kilkenny Edmonton property, take a real look at the insulation installation, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every insulation installation quote in Kilkenny Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the insulation installation in Kilkenny Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Kilkenny Edmonton home while we finish the insulation installation to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished insulation installation with us and you're happy with the result in Kilkenny Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the insulation installation contractor Kilkenny Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your insulation installation project in Kilkenny Edmonton.

Read our reviews on Google

FAQ — Insulation Installation Kilkenny Edmonton

Insulation Installation Kilkenny Edmonton: your questions answered

Why is the floor edge of my basement so cold?: Usually the rim joist — thin, directly exposed and often bare or with a batt tucked loosely against it. It needs air sealing first, then insulating; a loose batt against bare rim joist can trap moist air on cold wood.
Does it matter if the batt is squashed?: Yes. The trapped still air is the entire mechanism, so compressing a batt into a narrow bay costs real performance. We measure the actual Kilkenny bays and cut to fit rather than forcing standard batts in.
Will it help with noise between rooms?: Yes, noticeably for airborne noise, even when the job was about temperature. If a bedroom or office wall is open anyway, upgrading that cavity to a denser batt costs little extra.
Can you insulate a wall that is already open from a renovation in Kilkenny?: Yes — open cavities during an Balwin, Bannerman, Belmont renovation are the perfect insulation window before boarding.
Do you insulate basement developments to code in Kilkenny?: Yes — the R-value your Balwin, Bannerman, Belmont basement needs is what we install, batt plus vapour barrier. We also cover Balwin, Bannerman, Belmont and Northeast.
Can you install acoustic insulation for sound control in Kilkenny?: Yes — acoustic batt in the Kilkenny wall cavity, paired with resilient channel and sound board, is part of our soundproofing work.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Insulation

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Insulation Installation Kilkenny Edmonton

Insulation installation in Balwin, Bannerman, Belmont, before the drywall goes up