Do you stand behind your plaster repair in Callaghan?

Yes. We walk every Callaghan job with you before we pack up, and if something is not right we come back and make it right.

My old walls have hairline cracks all over. What is that?

Usually crazing — shrinkage in the finish coat or a failing paint film rather than structural movement. Filling each line leaves a wall of filled lines; it needs the surface stabilised and skimmed as a whole.

Is it cheaper to board over the plaster instead?

Sometimes. Once roughly a third of a wall has failed, boarding over and skimming usually buys a better wall for the money than rebuilding the plaster. If the plaster is largely sound, repairing costs less and keeps the character. We quote the one we would actually do.

Can you match plaster to my drywall reno in Callaghan?

Yes — blending old plaster into new drywall is common in Callaghan renos. Thickness and texture get matched on Callaghan repairs — no visible line under paint.

Repair or full-wall skim — which is right for Callaghan plaster?

It depends on the wall. A few cracks in solid Callaghan plaster we spot-fix; walls with extensive cracking or waviness do better skimmed flat. We give you a straight answer for your Callaghan home.

The corner of my plaster wall is bubbling. Why?

Often a corroded metal bead beneath. Rust expands and pushes the plaster off from behind, so filling it just brings the same failure back. That bead section has to come out and be replaced.

Plaster Repair Callaghan Edmonton | Lath & Plaster

Plaster repair in Callaghan, blended into the original wall

As older Callaghan houses settle, the plaster tells the story: hairline cracking, lath separation bulges, crumbling around past repairs. In Callaghan we repair plaster walls and ceilings and blend the work into the surrounding surface, or skim the whole wall to a flat modern finish. Callaghan is an established south Edmonton community of 1960s-70s homes where ceiling stipple, settling cracks and dated texture are common, so plaster work here ranges from spot crack repair to full-wall resurfacing. We cover Callaghan, Allard, Ambleside, Blackburne and Southwest, 7 days a week.

Skim-coating plaster to a flat modern finish
Skim coating over sound plaster for a flat modern finish
Plaster crack repair — hairline to structural cracks in Callaghan
Patching holes and crumbling edges
Water-damaged plaster cut back to sound material
Bulging plaster re-anchored to the lath in Callaghan homes
Callaghan coverage — we come to you

Plaster over masonry and chimney breasts

A different substrate again

Plaster applied directly to brick or block in an older Callaghan home has no lath and no keys — it bonds to the masonry itself.

Common failure

It fails where damp has reached the masonry, and repairing the surface without addressing the moisture just moves the problem along the wall. We look for the source before quoting the repair.

Common plaster repair situations in Callaghan in Edmonton

In Callaghan, callaghan sits in Edmonton's Southwest district. Across roughly 1,165 homes here, the drywall work is first-year settling, basement dev for first owners, Level 5 over builder-grade. We cover Callaghan and the surrounding Southwest district, 7 days a week. We handle all of it the same careful way — on-site quote, fixed price, done right.

Gypsum lath and the middle era

Between lath and drywall

Many mid-century Callaghan homes have small gypsum board panels — often called rock lath — with a plaster skim over them, rather than wood lath.

How it fails

It fails at the panel joints rather than by losing keys, so the cracking pattern is more regular. Identifying which system you have changes both the diagnosis and the repair, so it is the first thing we look at.

What affects the cost of plaster repair in Callaghan in Edmonton?

Crack repair vs bulging plaster

The cost of plaster repair in Callaghan depends on whether it is a surface crack, bulging plaster that has separated from the lath, or a failed section that needs cutting out. Quick fixes in Callaghan are the surface cracks — failed plaster needing re-securing or replacement takes longer and more material. We assess on site and give a fixed price first.

Repair vs skim-over in Callaghan

Many plaster walls here are best skim-coated over once the damage is stabilised — it brings an old wall back to a flat, modern finish rather than chasing endless cracks. We tell you honestly which makes sense for your Callaghan home.

Is the plaster still keyed to the lath?

The one question that sets the price

Traditional Callaghan plaster was pushed through wood lath so it squeezed out behind and hardened into keys. Those keys are all that hold it up. When they break, the plaster separates and the wall bulges or the ceiling sags.

How we check

We press and sound the surface by hand across the whole area, not only at the crack. Where the plaster still holds, it stays and gets skimmed. Where the keys have gone, that section is re-anchored with plaster washers or cut out and rebuilt. Nothing comes out that does not need to.

Reattaching plaster without removing it

Washers and adhesive

Where Callaghan plaster has separated but is otherwise sound, plaster washers screwed through into the lath or joists pull it back and hold it, sometimes with an injected adhesive behind.

Why it is worth doing

It preserves the original surface, is far less disruptive than removal, and costs less. It only works where the plaster itself is still strong, which is what the sounding test establishes.

How it works

Simple, clean, on schedule — Plaster Repair in Callaghan Edmonton

Free quote

We come out to your Callaghan Edmonton property, take a real look at the plaster repair, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every plaster repair quote in Callaghan Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the plaster repair in Callaghan Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Callaghan Edmonton home while we finish the plaster repair to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished plaster repair with us and you're happy with the result in Callaghan Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the plaster repair contractor Callaghan Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your plaster repair project in Callaghan Edmonton.

Read our reviews on Google

FAQ — Plaster Repair Callaghan Edmonton

Plaster Repair Callaghan Edmonton: your questions answered

Do you stand behind your plaster repair in Callaghan in Edmonton?: Yes. We walk every Callaghan job with you before we pack up, and if something is not right we come back and make it right.
My old walls have hairline cracks all over. What is that?: Usually crazing — shrinkage in the finish coat or a failing paint film rather than structural movement. Filling each line leaves a wall of filled lines; it needs the surface stabilised and skimmed as a whole.
Is it cheaper to board over the plaster instead?: Sometimes. Once roughly a third of a wall has failed, boarding over and skimming usually buys a better wall for the money than rebuilding the plaster. If the plaster is largely sound, repairing costs less and keeps the character. We quote the one we would actually do.
Can you match plaster to my drywall reno in Callaghan?: Yes — blending old plaster into new drywall is common in Callaghan renos. Thickness and texture get matched on Callaghan repairs — no visible line under paint.
Repair or full-wall skim — which is right for Callaghan plaster?: It depends on the wall. A few cracks in solid Callaghan plaster we spot-fix; walls with extensive cracking or waviness do better skimmed flat. We give you a straight answer for your Callaghan home.
The corner of my plaster wall is bubbling. Why?: Often a corroded metal bead beneath. Rust expands and pushes the plaster off from behind, so filling it just brings the same failure back. That bead section has to come out and be replaced.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Plaster Repair Callaghan Edmonton

Plaster repair in Callaghan, blended into the original wall