Is it cheaper to board over the plaster instead?

Sometimes. Once roughly a third of a wall has failed, boarding over and skimming usually buys a better wall for the money than rebuilding the plaster. If the plaster is largely sound, repairing costs less and keeps the character. We quote the one we would actually do.

Can loose plaster be saved without removing it?

Usually yes, if the plaster itself is still strong. Plaster washers screwed into the lath or joists pull it back and hold it, sometimes with adhesive behind. It preserves the original surface and costs less than removal.

Do you stand behind your plaster repair in St. Albert?

Yes. We walk every St. Albert job with you before we pack up, and if something is not right we come back and make it right.

My St. Albert plaster is bulging off the lath — fixable?

Yes. In St. Albert we re-fasten lath-separated plaster or replace what has failed, finishing with a skim-blend that hides the repair.

My St. Albert ceiling has a sag in it. Is that urgent?

Treat it as urgent. A sagging plaster ceiling has lost its keys and is holding itself against gravity. Keep people out from under it and call us. We will tell you whether it can be re-secured with plaster washers or has to come down.

Can you match the texture on my old St. Albert walls?

Yes. We feather the skim well past the repair and match the surrounding texture before priming, so the patch does not read as a rectangle under side light. Where a wall is too uneven to blend into, we will tell you that skimming the whole wall gives a better result.

Plaster Repair St. Albert | Lath & Plaster

Cracked and bulging plaster in St. Albert, re-anchored and skimmed flat

As older St. Albert houses settle, the plaster tells the story: hairline cracking, lath separation bulges, crumbling around past repairs. In St. Albert we repair plaster walls and ceilings and blend the work into the surrounding surface, or skim the whole wall to a flat modern finish. St. Albert is an established south Edmonton community of 1960s-70s homes where ceiling stipple, settling cracks and dated texture are common, so plaster work here ranges from spot crack repair to full-wall resurfacing. We cover St. Albert, Edmonton and Edmonton, 7 days a week.

Delaminated St. Albert ceilings re-secured or rebuilt
St. Albert lath-separated plaster bulges re-secured
Bulging plaster re-anchored to the lath in St. Albert homes
Water-damaged plaster cut back to sound material
Skim-coating plaster to a flat modern finish
Bulging plaster re-anchored to the lath with plaster washers
Hairline and settlement crack repair in St. Albert

Why St. Albert homeowners trust Emplastrum for plaster repair in St. Albert

We finish to match the original

We are a mudding and taping specialist, so blending a plaster repair into an old St. Albert wall — matching the texture and the plane — is exactly the work we are known for.

Fixed price, same-day reply

We repair plaster across St. Albert and Edmonton, 7 days a week. The St. Albert quote is free, the price fixed, your floors and furniture protected, the dust controlled — and the repair backed. Not right in St. Albert? We come back and correct it.

St. Albert drywall in context

About St. Albert

Albert has a genuine mix of older and newer homes (about 54% pre-1991, 25% since 2000), so we see both plaster and stipple repair and new-build basement development.

What we see in St. Albert

In St. Albert the drywall work is both plaster and stipple repair and new-build basement development. We confirm what your home actually needs on site, in writing, before anything starts.

Our St. Albert plaster repair process in St. Albert, step by step

Stabilise the plaster first

A plaster repair in St. Albert only lasts if the plaster is stable. Pulled-away St. Albert plaster gets re-anchored; crumbling sections get cut back to sound material first. That skipped step is why St. Albert plaster patches so often re-crack.

Patch, skim, blend

The right plaster-grade material goes in, the area or full wall gets skimmed flat, edges feathered wide, then sanded paint-ready. In most St. Albert homes, once it is painted you will not find where we worked.

Plaster ceilings, and why they are treated differently

Gravity is the difference

A wall that has separated from its lath will sit there for years. A St. Albert ceiling that has separated is holding itself up against gravity, and it lets go in sheets. Any sag, any springiness, and we treat the ceiling as a safety item rather than a cosmetic one.

Re-secure or rebuild

Where the plaster is sound but the keys are tired, plaster washers screwed through into the joists pull it back tight. Where it is crumbling, that section comes down and is rebuilt in board, then skimmed so the ceiling reads as one continuous surface.

Plaster or skim-coat? What is right for your St. Albert home

Keeping the plaster

Where the plaster in your St. Albert home is largely sound, we repair the damaged areas and blend — the most cost-effective option.

Skimming to a modern finish

Where a wall has widespread cracking or an uneven, wavy surface, we skim-coat it flat for a clean modern finish, or remove failed plaster and re-board with drywall. Both come up here, and we match whatever finish your St. Albert walls and ceilings already have.

Skim coating over sound St. Albert plaster

When a whole-wall skim beats patching

Where a St. Albert wall carries dozens of small repairs, decades of paint build-up and an uneven surface, patching each mark leaves a wall that still looks patched. A full skim coat over the sound plaster resets the surface to one flat plane.

What is involved

The wall is stabilised, glossy or flaking paint is de-glossed or removed, a bonding agent goes on where it is needed, then two thin coats are trowelled and sanded. The result takes paint like new board while keeping the original wall behind it.

Matching a repair into an old St. Albert wall

Flat is not always right

An invisible plaster repair is not the flattest patch, it is the patch that matches what surrounds it. Old St. Albert plaster is rarely dead flat and often carries a light sand or trowel texture. A perfectly flat patch in the middle of it reads as a rectangle under side light.

Feathering and texture

We feather the skim well past the repair so there is no edge to catch the light, then match the surrounding texture before priming. Where a wall is too uneven to blend into, skimming the whole wall gives a better result than fighting the join.

How it works

Simple, clean, on schedule — Plaster Repair in St Albert

Free quote

We come out to your St Albert property, take a real look at the plaster repair, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every plaster repair quote in St Albert starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the plaster repair in St Albert. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your St Albert home while we finish the plaster repair to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished plaster repair with us and you're happy with the result in St Albert. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by St. Albert Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the plaster repair contractor St Albert trusts for repair, restoration and finishing — rated on Google by St. Albert homeowners.

Read the reviews, or leave your own after your plaster repair project in St Albert.

Read our reviews on Google

FAQ — Plaster Repair St. Albert

Plaster Repair St. Albert: your questions answered

Is it cheaper to board over the plaster instead?: Sometimes. Once roughly a third of a wall has failed, boarding over and skimming usually buys a better wall for the money than rebuilding the plaster. If the plaster is largely sound, repairing costs less and keeps the character. We quote the one we would actually do.
Can loose plaster be saved without removing it?: Usually yes, if the plaster itself is still strong. Plaster washers screwed into the lath or joists pull it back and hold it, sometimes with adhesive behind. It preserves the original surface and costs less than removal.
Do you stand behind your plaster repair in St. Albert in St. Albert?: Yes. We walk every St. Albert job with you before we pack up, and if something is not right we come back and make it right.
My St. Albert plaster is bulging off the lath — fixable?: Yes. In St. Albert we re-fasten lath-separated plaster or replace what has failed, finishing with a skim-blend that hides the repair.
My St. Albert ceiling has a sag in it. Is that urgent?: Treat it as urgent. A sagging plaster ceiling has lost its keys and is holding itself against gravity. Keep people out from under it and call us. We will tell you whether it can be re-secured with plaster washers or has to come down.
Can you match the texture on my old St. Albert walls?: Yes. We feather the skim well past the repair and match the surrounding texture before priming, so the patch does not read as a rectangle under side light. Where a wall is too uneven to blend into, we will tell you that skimming the whole wall gives a better result.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Plaster Repair St. Albert

Cracked and bulging plaster in St. Albert, re-anchored and skimmed flat