Free on-site quotes7 days a weekEdmonton · St. Albert · Sherwood Park · Spruce GroveLocally owned & operatedThe Go-To Drywall Contractor for Repair, Restoration & Finishing

Plaster repair in Kenilworth, blended into the original wall

Movement in older Kenilworth homes registers in the plaster first — fine cracks, bulges where it left the lath, edges crumbling at old patches. In Kenilworth we repair plaster walls and ceilings and blend the work into the surrounding surface, or skim the whole wall to a flat modern finish. Kenilworth is an Southeast community with a mix of older homes and newer builds, so plaster work here ranges from spot crack repair to full-wall resurfacing. We cover Kenilworth, Avonmore, Bonnie Doon, Capilano and Southeast, 7 days a week.

Plaster Repair Kenilworth Edmonton

Watch plaster repair jobs in Kenilworth Edmonton on our YouTube channel

Living in the house while Kenilworth plaster is repaired

Dust is the real disruption

Plaster repair makes fine dust that travels, so containment matters more here than on new work. We seal the working area, cover floors, and run the sanding to a vacuum where the job allows it.

Sequencing around you

Plaster repairs cure in coats, so a room is usually worked over several visits rather than one long day. We sequence so the space is usable between coats wherever possible, and we say up front which days it genuinely will not be.

Kenilworth drywall in context

About Kenilworth

Kenilworth lies in the City's southeast, immediately north of the vibrant Whyte Avenue.

What we see in Kenilworth

In Kenilworth the drywall work is plaster and lath repair, popcorn and stipple ceiling removal, careful patching into original surfaces. We confirm what your home actually needs on site, in writing, before anything starts.

Plaster or skim-coat? What is right for your Kenilworth home

Keeping the plaster

Where the plaster in your Kenilworth home is largely sound, we repair the damaged areas and blend — the most cost-effective option.

Skimming to a modern finish

Where a wall has widespread cracking or an uneven, wavy surface, we skim-coat it flat for a clean modern finish, or remove failed plaster and re-board with drywall. Both come up here, and we match whatever finish your Kenilworth walls and ceilings already have.

Reattaching plaster without removing it

Washers and adhesive

Where Kenilworth plaster has separated but is otherwise sound, plaster washers screwed through into the lath or joists pull it back and hold it, sometimes with an injected adhesive behind.

Why it is worth doing

It preserves the original surface, is far less disruptive than removal, and costs less. It only works where the plaster itself is still strong, which is what the sounding test establishes.

Why Kenilworth homeowners trust Emplastrum for plaster repair in Edmonton

We finish to match the original

We are a mudding and taping specialist, so blending a plaster repair into an old Kenilworth wall — matching the texture and the plane — is exactly the work we are known for.

Fixed price, same-day reply

We repair plaster across Kenilworth and Southeast, 7 days a week. The Kenilworth quote is free, the price fixed, your floors and furniture protected, the dust controlled — and the repair backed. Not right in Kenilworth? We come back and correct it.

Horsehair and the really old Kenilworth plaster

What you may have

The oldest plaster in Kenilworth homes is lime-based with animal hair worked in as reinforcement, applied over wood lath in three coats.

Why it matters

It behaves differently from modern gypsum plaster — softer, more flexible, and it dislikes modern hard fillers, which crack at the boundary. Where we find it, the repair uses a compatible material rather than whatever is on the truck.

Skim coating over sound Kenilworth plaster

When a whole-wall skim beats patching

Where a Kenilworth wall carries dozens of small repairs, decades of paint build-up and an uneven surface, patching each mark leaves a wall that still looks patched. A full skim coat over the sound plaster resets the surface to one flat plane.

What is involved

The wall is stabilised, glossy or flaking paint is de-glossed or removed, a bonding agent goes on where it is needed, then two thin coats are trowelled and sanded. The result takes paint like new board while keeping the original wall behind it.

Simple, clean, on schedule — Plaster Repair in Kenilworth Edmonton

1

Free quote

We come out to your Kenilworth Edmonton property, take a real look at the plaster repair, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every plaster repair quote in Kenilworth Edmonton starts with an honest, on-site assessment.

2

Book a day

We pick a day that works for your schedule and show up on time, ready to start the plaster repair in Kenilworth Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

3

The work

We keep the dust under control and protect your Kenilworth Edmonton home while we finish the plaster repair to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

4

Walk it with you

We don't pack up till you've walked the finished plaster repair with us and you're happy with the result in Kenilworth Edmonton. If anything needs a second look, we handle it before we call the job done.

Rated by Edmonton Homeowners

Emplastrum Drywall is the plaster repair contractor Kenilworth Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your plaster repair project in Kenilworth Edmonton.

Read our reviews on Google

Plaster Repair Kenilworth Edmonton: your questions answered

The corner of my plaster wall is bubbling. Why?
Often a corroded metal bead beneath. Rust expands and pushes the plaster off from behind, so filling it just brings the same failure back. That bead section has to come out and be replaced.
Can you match the texture on my old Kenilworth walls?
Yes. We feather the skim well past the repair and match the surrounding texture before priming, so the patch does not read as a rectangle under side light. Where a wall is too uneven to blend into, we will tell you that skimming the whole wall gives a better result.
Can loose plaster be saved without removing it?
Usually yes, if the plaster itself is still strong. Plaster washers screwed into the lath or joists pull it back and hold it, sometimes with adhesive behind. It preserves the original surface and costs less than removal.
Can you match plaster to my drywall reno in Kenilworth?
Yes — blending old plaster into new drywall is common in Kenilworth renos. Thickness and texture get matched on Kenilworth repairs — no visible line under paint.
Will the repair crack again?
Not if it is taped rather than only filled. Cracks that follow building movement need tape across them so the repair can flex. Filler alone bridges the gap and re-cracks in the first dry spell, which is the usual reason an earlier Kenilworth repair failed.
Can you repair Kenilworth plaster without tearing the wall out?
In most cases, yes. If the plaster is still keyed to the lath it gets re-anchored and skimmed rather than removed. We only cut out sections that have genuinely failed, and we tell you on site which of the two you have.

Need Edmonton’s go-to drywall contractor for repair, restoration and finishing? One trusted team for boarding, taping, finishing, repairs & renovations — start to finish.

Your Drywall Contractor in Edmonton →
Get Your Free Drywall Quote
Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.
No obligation. We never share your information.
📞  Call (403) 829-8702 Free Quote
See our latest drywall projects & updates on FacebookFollow Emplastrum Drywall — Edmonton, St. Albert, Sherwood Park, Spruce Grove & Stony Plain Follow on Facebook