Free on-site quotes7 days a weekEdmonton · St. Albert · Sherwood Park · Spruce GroveLocally owned & operatedThe Go-To Drywall Contractor for Repair, Restoration & Finishing

Plaster repair in Kensington, blended into the original wall

Plaster does not fail the way drywall does. In Kensington the first sign is usually a hairline crack tracking off a door or window corner, or a soft spot in a ceiling where the keys have let go of the lath. We work out which of those you have before quoting, because a surface crack and a delaminated ceiling are different jobs at different costs.

Plaster Repair Kensington Edmonton

Watch plaster repair jobs in Kensington Edmonton on our YouTube channel

What affects the cost of plaster repair in Kensington in Edmonton?

Crack repair vs bulging plaster

The cost of plaster repair in Kensington depends on whether it is a surface crack, bulging plaster that has separated from the lath, or a failed section that needs cutting out. Quick fixes in Kensington are the surface cracks — failed plaster needing re-securing or replacement takes longer and more material. We assess on site and give a fixed price first.

Repair vs skim-over in Kensington

Many plaster walls here are best skim-coated over once the damage is stabilised — it brings an old wall back to a flat, modern finish rather than chasing endless cracks. We tell you honestly which makes sense for your Kensington home.

Kensington drywall in context

About Kensington

Kensington was annexed to the City in 1913 during a real estate boom but most development didn't occur until the 1950s.

What we see in Kensington

In Kensington the drywall work is plaster and lath repair, popcorn and stipple ceiling removal, careful patching into original surfaces. We confirm what your home actually needs on site, in writing, before anything starts.

Gypsum lath and the middle era

Between lath and drywall

Many mid-century Kensington homes have small gypsum board panels — often called rock lath — with a plaster skim over them, rather than wood lath.

How it fails

It fails at the panel joints rather than by losing keys, so the cracking pattern is more regular. Identifying which system you have changes both the diagnosis and the repair, so it is the first thing we look at.

Skim coating over sound Kensington plaster

When a whole-wall skim beats patching

Where a Kensington wall carries dozens of small repairs, decades of paint build-up and an uneven surface, patching each mark leaves a wall that still looks patched. A full skim coat over the sound plaster resets the surface to one flat plane.

What is involved

The wall is stabilised, glossy or flaking paint is de-glossed or removed, a bonding agent goes on where it is needed, then two thin coats are trowelled and sanded. The result takes paint like new board while keeping the original wall behind it.

Water-damaged plaster in Kensington

Find the source first

We do not repair water-damaged Kensington plaster until the leak is fixed and the substrate is dry, because plaster over damp lath fails again within a season.

What has to come out

Water breaks the bond between plaster and lath and rots the keys even where the surface still looks solid. Stained plaster gets sounded well past the visible mark and cut back to material that is genuinely sound, then rebuilt and blended. Where the stain sits only in the paint film and the plaster behind it rings solid, a stain-blocking primer and a skim is the honest fix.

Corner beads in plaster walls

Metal that rusts

Older Kensington plaster corners often have metal bead beneath, and where moisture has reached it the rust expands and pushes the plaster off from behind.

Why filling fails

Filling that corner without dealing with the corroded bead means the same failure returns, because the cause is still expanding. The bead section comes out and is replaced.

Matching a repair into an old Kensington wall

Flat is not always right

An invisible plaster repair is not the flattest patch, it is the patch that matches what surrounds it. Old Kensington plaster is rarely dead flat and often carries a light sand or trowel texture. A perfectly flat patch in the middle of it reads as a rectangle under side light.

Feathering and texture

We feather the skim well past the repair so there is no edge to catch the light, then match the surrounding texture before priming. Where a wall is too uneven to blend into, skimming the whole wall gives a better result than fighting the join.

Simple, clean, on schedule — Plaster Repair in Kensington Edmonton

1

Free quote

We come out to your Kensington Edmonton property, take a real look at the plaster repair, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every plaster repair quote in Kensington Edmonton starts with an honest, on-site assessment.

2

Book a day

We pick a day that works for your schedule and show up on time, ready to start the plaster repair in Kensington Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

3

The work

We keep the dust under control and protect your Kensington Edmonton home while we finish the plaster repair to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

4

Walk it with you

We don't pack up till you've walked the finished plaster repair with us and you're happy with the result in Kensington Edmonton. If anything needs a second look, we handle it before we call the job done.

Rated by Edmonton Homeowners

Emplastrum Drywall is the plaster repair contractor Kensington Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your plaster repair project in Kensington Edmonton.

Read our reviews on Google

Plaster Repair Kensington Edmonton: your questions answered

Can you match the texture on my old Kensington walls?
Yes. We feather the skim well past the repair and match the surrounding texture before priming, so the patch does not read as a rectangle under side light. Where a wall is too uneven to blend into, we will tell you that skimming the whole wall gives a better result.
Can you match plaster to my drywall reno in Kensington?
Yes — blending old plaster into new drywall is common in Kensington renos. Thickness and texture get matched on Kensington repairs — no visible line under paint.
The corner of my plaster wall is bubbling. Why?
Often a corroded metal bead beneath. Rust expands and pushes the plaster off from behind, so filling it just brings the same failure back. That bead section has to come out and be replaced.
My Kensington ceiling has a sag in it. Is that urgent?
Treat it as urgent. A sagging plaster ceiling has lost its keys and is holding itself against gravity. Keep people out from under it and call us. We will tell you whether it can be re-secured with plaster washers or has to come down.
Will the repair crack again?
Not if it is taped rather than only filled. Cracks that follow building movement need tape across them so the repair can flex. Filler alone bridges the gap and re-cracks in the first dry spell, which is the usual reason an earlier Kensington repair failed.
My old walls have hairline cracks all over. What is that?
Usually crazing — shrinkage in the finish coat or a failing paint film rather than structural movement. Filling each line leaves a wall of filled lines; it needs the surface stabilised and skimmed as a whole.

Need Edmonton’s go-to drywall contractor for repair, restoration and finishing? One trusted team for boarding, taping, finishing, repairs & renovations — start to finish.

Your Drywall Contractor in Edmonton →
Get Your Free Drywall Quote
Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.
No obligation. We never share your information.
📞  Call (403) 829-8702 Free Quote
See our latest drywall projects & updates on FacebookFollow Emplastrum Drywall — Edmonton, St. Albert, Sherwood Park, Spruce Grove & Stony Plain Follow on Facebook