Is it cheaper to board over the plaster instead?

Sometimes. Once roughly a third of a wall has failed, boarding over and skimming usually buys a better wall for the money than rebuilding the plaster. If the plaster is largely sound, repairing costs less and keeps the character. We quote the one we would actually do.

Will you damage my plaster mouldings?

Not knowingly. We ask what is being kept before starting and work back to a natural break in the moulding rather than through it. Where a detail cannot be matched we say so beforehand rather than apologising after.

My Canon Ridge plaster is bulging off the lath — fixable?

Yes. In Canon Ridge we re-fasten lath-separated plaster or replace what has failed, finishing with a skim-blend that hides the repair.

My Canon Ridge ceiling has a sag in it. Is that urgent?

Treat it as urgent. A sagging plaster ceiling has lost its keys and is holding itself against gravity. Keep people out from under it and call us. We will tell you whether it can be re-secured with plaster washers or has to come down.

Can you match plaster to my drywall reno in Canon Ridge?

Yes — blending old plaster into new drywall is common in Canon Ridge renos. Thickness and texture get matched on Canon Ridge repairs — no visible line under paint.

Do you repair plaster in Canon Ridge?

Yes — plaster repair in Canon Ridge is part of our regular service area, and we are usually booked within the week. We also cover Balwin, Bannerman, Belmont and Northeast.

Plaster Repair Canon Ridge Edmonton | Lath & Plaster

Cracked and bulging plaster in Canon Ridge, re-anchored and skimmed flat

As older Canon Ridge houses settle, the plaster tells the story: hairline cracking, lath separation bulges, crumbling around past repairs. In Canon Ridge we repair plaster walls and ceilings and blend the work into the surrounding surface, or skim the whole wall to a flat modern finish. Canon Ridge is one of Northeast's newer communities, where fresh installation and first-year settling work are common, so plaster work here ranges from spot crack repair to full-wall resurfacing. We cover Canon Ridge, Balwin, Bannerman, Belmont and Northeast, 7 days a week.

Skim coating over sound plaster for a flat modern finish
Patching holes and crumbling edges
Dust-controlled work in older Canon Ridge homes
Water-damaged plaster cut back to sound material
Texture matched where the surrounding plaster is textured
Blending plaster repairs into drywall additions
Skim-coating plaster to a flat modern finish

Living in the house while Canon Ridge plaster is repaired

Dust is the real disruption

Plaster repair makes fine dust that travels, so containment matters more here than on new work. We seal the working area, cover floors, and run the sanding to a vacuum where the job allows it.

Sequencing around you

Plaster repairs cure in coats, so a room is usually worked over several visits rather than one long day. We sequence so the space is usable between coats wherever possible, and we say up front which days it genuinely will not be.

Canon Ridge drywall in context

About Canon Ridge

Canon Ridge lies within the Hermitage area, and is named for an Anglican minister who arrived in Edmonton in 1875.

What we see in Canon Ridge

In Canon Ridge the drywall work is first-year settling, basement dev for first owners, Level 5 over builder-grade. We confirm what your home actually needs on site, in writing, before anything starts.

Hairline crazing across a whole wall

Not the same as a crack

A network of fine random cracking across an Canon Ridge plaster surface is usually shrinkage in the finish coat or a paint film failing, not structural movement.

What it needs

Not filling — that leaves a wall of filled lines. It needs the surface stabilised and skimmed as a whole, which is why it is priced by the wall rather than by the crack.

Living with a heritage Canon Ridge interior

Mouldings and detail

Older homes often carry plaster cornice, ceiling roses and picture rails. Careless repair destroys detail that cannot easily be replaced.

How we work around it

We ask before starting what is being kept, work back to a natural break in the moulding rather than through it, and say honestly where a detail cannot be matched rather than damaging it and apologising afterwards.

Skim coating over sound Canon Ridge plaster

When a whole-wall skim beats patching

Where a Canon Ridge wall carries dozens of small repairs, decades of paint build-up and an uneven surface, patching each mark leaves a wall that still looks patched. A full skim coat over the sound plaster resets the surface to one flat plane.

What is involved

The wall is stabilised, glossy or flaking paint is de-glossed or removed, a bonding agent goes on where it is needed, then two thin coats are trowelled and sanded. The result takes paint like new board while keeping the original wall behind it.

Reattaching plaster without removing it

Washers and adhesive

Where Canon Ridge plaster has separated but is otherwise sound, plaster washers screwed through into the lath or joists pull it back and hold it, sometimes with an injected adhesive behind.

Why it is worth doing

It preserves the original surface, is far less disruptive than removal, and costs less. It only works where the plaster itself is still strong, which is what the sounding test establishes.

Why Canon Ridge plaster cracks in the first place

Movement, not bad workmanship

Most cracking in Canon Ridge plaster is seasonal movement rather than a defect. Alberta humidity swings move a timber frame, and plaster is rigid, so it relieves that stress at its weakest points: the corners of door and window openings, and the joint between ceiling and wall.

What that means for the repair

A crack that moves has to be taped, not just filled. Filler on its own bridges the gap and re-cracks in the first dry spell. We tape across the crack so the repair can take the movement, then skim it out flat.

How it works

Simple, clean, on schedule — Plaster Repair in Canon Ridge Edmonton

Free quote

We come out to your Canon Ridge Edmonton property, take a real look at the plaster repair, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every plaster repair quote in Canon Ridge Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the plaster repair in Canon Ridge Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Canon Ridge Edmonton home while we finish the plaster repair to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished plaster repair with us and you're happy with the result in Canon Ridge Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the plaster repair contractor Canon Ridge Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your plaster repair project in Canon Ridge Edmonton.

Read our reviews on Google

FAQ — Plaster Repair Canon Ridge Edmonton

Plaster Repair Canon Ridge Edmonton: your questions answered

Is it cheaper to board over the plaster instead?: Sometimes. Once roughly a third of a wall has failed, boarding over and skimming usually buys a better wall for the money than rebuilding the plaster. If the plaster is largely sound, repairing costs less and keeps the character. We quote the one we would actually do.
Will you damage my plaster mouldings?: Not knowingly. We ask what is being kept before starting and work back to a natural break in the moulding rather than through it. Where a detail cannot be matched we say so beforehand rather than apologising after.
My Canon Ridge plaster is bulging off the lath — fixable?: Yes. In Canon Ridge we re-fasten lath-separated plaster or replace what has failed, finishing with a skim-blend that hides the repair.
My Canon Ridge ceiling has a sag in it. Is that urgent?: Treat it as urgent. A sagging plaster ceiling has lost its keys and is holding itself against gravity. Keep people out from under it and call us. We will tell you whether it can be re-secured with plaster washers or has to come down.
Can you match plaster to my drywall reno in Canon Ridge?: Yes — blending old plaster into new drywall is common in Canon Ridge renos. Thickness and texture get matched on Canon Ridge repairs — no visible line under paint.
Do you repair plaster in Canon Ridge?: Yes — plaster repair in Canon Ridge is part of our regular service area, and we are usually booked within the week. We also cover Balwin, Bannerman, Belmont and Northeast.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Plaster Repair Canon Ridge Edmonton

Cracked and bulging plaster in Canon Ridge, re-anchored and skimmed flat