Can you match the texture on my old Cloverdale walls?

Yes. We feather the skim well past the repair and match the surrounding texture before priming, so the patch does not read as a rectangle under side light. Where a wall is too uneven to blend into, we will tell you that skimming the whole wall gives a better result.

Is it cheaper to board over the plaster instead?

Sometimes. Once roughly a third of a wall has failed, boarding over and skimming usually buys a better wall for the money than rebuilding the plaster. If the plaster is largely sound, repairing costs less and keeps the character. We quote the one we would actually do.

Do you stand behind your plaster repair in Cloverdale?

Yes. We walk every Cloverdale job with you before we pack up, and if something is not right we come back and make it right.

Can you repair Cloverdale plaster without tearing the wall out?

In most cases, yes. If the plaster is still keyed to the lath it gets re-anchored and skimmed rather than removed. We only cut out sections that have genuinely failed, and we tell you on site which of the two you have.

Will you damage my plaster mouldings?

Not knowingly. We ask what is being kept before starting and work back to a natural break in the moulding rather than through it. Where a detail cannot be matched we say so beforehand rather than apologising after.

Is spot repair enough for my Cloverdale plaster, or should the wall be skimmed?

It depends on the wall. In Cloverdale, isolated cracks in sound plaster mean spot repair — widespread cracking or waves mean a full skim. We give you a straight answer for your Cloverdale home.

Plaster Repair Cloverdale Edmonton | Lath & Plaster

Lath-and-plaster repair in Cloverdale without gutting the room

Plaster does not fail the way drywall does. In Cloverdale the first sign is usually a hairline crack tracking off a door or window corner, or a soft spot in a ceiling where the keys have let go of the lath. We work out which of those you have before quoting, because a surface crack and a delaminated ceiling are different jobs at different costs.

Blending plaster repairs into drywall additions
Patching holes and crumbling edges
Texture matched where the surrounding plaster is textured
Skim coating over sound plaster for a flat modern finish
Hairline and settlement crack repair in Cloverdale
Bulging plaster re-anchored to the lath with plaster washers
Cloverdale lath-separated plaster bulges re-secured

Plaster over masonry and chimney breasts

A different substrate again

Plaster applied directly to brick or block in an older Cloverdale home has no lath and no keys — it bonds to the masonry itself.

Common failure

It fails where damp has reached the masonry, and repairing the surface without addressing the moisture just moves the problem along the wall. We look for the source before quoting the repair.

Cloverdale drywall in context

About Cloverdale

Cloverdale is situated along the south bank of the North Saskatchewan River near the centre of the city.

What we see in Cloverdale

In Cloverdale the drywall work is settling cracks/nail pops, basement development, builder-grade L4->L5 upgrades. We confirm what your home actually needs on site, in writing, before anything starts.

Living in the house while Cloverdale plaster is repaired

Dust is the real disruption

Plaster repair makes fine dust that travels, so containment matters more here than on new work. We seal the working area, cover floors, and run the sanding to a vacuum where the job allows it.

Sequencing around you

Plaster repairs cure in coats, so a room is usually worked over several visits rather than one long day. We sequence so the space is usable between coats wherever possible, and we say up front which days it genuinely will not be.

Plaster ceilings, and why they are treated differently

Gravity is the difference

A wall that has separated from its lath will sit there for years. A Cloverdale ceiling that has separated is holding itself up against gravity, and it lets go in sheets. Any sag, any springiness, and we treat the ceiling as a safety item rather than a cosmetic one.

Re-secure or rebuild

Where the plaster is sound but the keys are tired, plaster washers screwed through into the joists pull it back tight. Where it is crumbling, that section comes down and is rebuilt in board, then skimmed so the ceiling reads as one continuous surface.

Water-damaged plaster in Cloverdale

Find the source first

We do not repair water-damaged Cloverdale plaster until the leak is fixed and the substrate is dry, because plaster over damp lath fails again within a season.

What has to come out

Water breaks the bond between plaster and lath and rots the keys even where the surface still looks solid. Stained plaster gets sounded well past the visible mark and cut back to material that is genuinely sound, then rebuilt and blended. Where the stain sits only in the paint film and the plaster behind it rings solid, a stain-blocking primer and a skim is the honest fix.

Hairline crazing across a whole wall

Not the same as a crack

A network of fine random cracking across an Cloverdale plaster surface is usually shrinkage in the finish coat or a paint film failing, not structural movement.

What it needs

Not filling — that leaves a wall of filled lines. It needs the surface stabilised and skimmed as a whole, which is why it is priced by the wall rather than by the crack.

Repairing plaster against boarding over it

Two honest options

Some Cloverdale rooms are past patching. Then the choice is rebuilding the plaster or boarding over it with drywall and skimming. Boarding is faster and flatter. It also buries the original surface and costs a little ceiling height and any plaster detail.

How we decide with you

If the plaster is largely sound, repairing keeps the character and costs less. Once roughly a third of a wall has failed, boarding over usually buys a better wall for the money. We tell you which one we would do, and why, before you commit to either.

How it works

Simple, clean, on schedule — Plaster Repair in Cloverdale Edmonton

Free quote

We come out to your Cloverdale Edmonton property, take a real look at the plaster repair, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every plaster repair quote in Cloverdale Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the plaster repair in Cloverdale Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Cloverdale Edmonton home while we finish the plaster repair to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished plaster repair with us and you're happy with the result in Cloverdale Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the plaster repair contractor Cloverdale Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your plaster repair project in Cloverdale Edmonton.

Read our reviews on Google

FAQ — Plaster Repair Cloverdale Edmonton

Plaster Repair Cloverdale Edmonton: your questions answered

Can you match the texture on my old Cloverdale walls?: Yes. We feather the skim well past the repair and match the surrounding texture before priming, so the patch does not read as a rectangle under side light. Where a wall is too uneven to blend into, we will tell you that skimming the whole wall gives a better result.
Is it cheaper to board over the plaster instead?: Sometimes. Once roughly a third of a wall has failed, boarding over and skimming usually buys a better wall for the money than rebuilding the plaster. If the plaster is largely sound, repairing costs less and keeps the character. We quote the one we would actually do.
Do you stand behind your plaster repair in Cloverdale in Edmonton?: Yes. We walk every Cloverdale job with you before we pack up, and if something is not right we come back and make it right.
Can you repair Cloverdale plaster without tearing the wall out?: In most cases, yes. If the plaster is still keyed to the lath it gets re-anchored and skimmed rather than removed. We only cut out sections that have genuinely failed, and we tell you on site which of the two you have.
Will you damage my plaster mouldings?: Not knowingly. We ask what is being kept before starting and work back to a natural break in the moulding rather than through it. Where a detail cannot be matched we say so beforehand rather than apologising after.
Is spot repair enough for my Cloverdale plaster, or should the wall be skimmed?: It depends on the wall. In Cloverdale, isolated cracks in sound plaster mean spot repair — widespread cracking or waves mean a full skim. We give you a straight answer for your Cloverdale home.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Plaster Repair Cloverdale Edmonton

Lath-and-plaster repair in Cloverdale without gutting the room