My Richford ceiling has a sag in it. Is that urgent?

Treat it as urgent. A sagging plaster ceiling has lost its keys and is holding itself against gravity. Keep people out from under it and call us. We will tell you whether it can be re-secured with plaster washers or has to come down.

Do you stand behind your plaster repair in Richford?

Yes. We walk every Richford job with you before we pack up, and if something is not right we come back and make it right.

Is it cheaper to board over the plaster instead?

Sometimes. Once roughly a third of a wall has failed, boarding over and skimming usually buys a better wall for the money than rebuilding the plaster. If the plaster is largely sound, repairing costs less and keeps the character. We quote the one we would actually do.

Do you repair plaster in Richford?

Yes — plaster repair in Richford is part of our regular service area, and we are usually booked within the week. We also cover Allard, Ambleside, Blackburne and Southwest.

Do you work on lath-and-plaster and on modern veneer plaster?

Both. Wood-lath and gypsum-lath plaster in older Richford homes, and veneer plaster over blueboard in newer builds. The failure modes are different, so we identify which you have before quoting.

Do you work on plaster over brick?

Yes, and it is a different substrate — no lath, no keys, bonded to the masonry. It fails where damp has reached the brick, so we look for the moisture source before quoting, or the problem just moves along the wall.

Plaster Repair Richford Edmonton | Lath & Plaster

Cracked and bulging plaster in Richford, re-anchored and skimmed flat

As older Richford houses settle, the plaster tells the story: hairline cracking, lath separation bulges, crumbling around past repairs. In Richford we repair plaster walls and ceilings and blend the work into the surrounding surface, or skim the whole wall to a flat modern finish. Richford is one of Southwest's newer communities, where fresh installation and first-year settling work are common, so plaster work here ranges from spot crack repair to full-wall resurfacing. We cover Richford, Allard, Ambleside, Blackburne and Southwest, 7 days a week.

Hairline and settlement crack repair in Richford
Blending plaster repairs into drywall additions
Skim-coating plaster to a flat modern finish
Bulging plaster re-anchored to the lath in Richford homes
Plaster crack repair — hairline to structural cracks in Richford
Richford lath-separated plaster bulges re-secured
Patching holes and crumbling edges

Hairline crazing across a whole wall

Not the same as a crack

A network of fine random cracking across an Richford plaster surface is usually shrinkage in the finish coat or a paint film failing, not structural movement.

What it needs

Not filling — that leaves a wall of filled lines. It needs the surface stabilised and skimmed as a whole, which is why it is priced by the wall rather than by the crack.

Repairing plaster against boarding over it

Two honest options

Some Richford rooms are past patching. Then the choice is rebuilding the plaster or boarding over it with drywall and skimming. Boarding is faster and flatter. It also buries the original surface and costs a little ceiling height and any plaster detail.

How we decide with you

If the plaster is largely sound, repairing keeps the character and costs less. Once roughly a third of a wall has failed, boarding over usually buys a better wall for the money. We tell you which one we would do, and why, before you commit to either.

Common plaster repair situations in Richford in Edmonton

In Richford, richford sits in Edmonton's Southwest district. Across roughly 255 homes here, the drywall work is first-year settling, basement dev for first owners, Level 5 over builder-grade. We cover Richford and the surrounding Southwest district, 7 days a week. Assessed on site, priced up front, and finished properly — every time.

Skim coating over sound Richford plaster

When a whole-wall skim beats patching

Where a Richford wall carries dozens of small repairs, decades of paint build-up and an uneven surface, patching each mark leaves a wall that still looks patched. A full skim coat over the sound plaster resets the surface to one flat plane.

What is involved

The wall is stabilised, glossy or flaking paint is de-glossed or removed, a bonding agent goes on where it is needed, then two thin coats are trowelled and sanded. The result takes paint like new board while keeping the original wall behind it.

Plaster or skim-coat? What is right for your Richford home

Keeping the plaster

Where the plaster in your Richford home is largely sound, we repair the damaged areas and blend — the most cost-effective option.

Skimming to a modern finish

Where a wall has widespread cracking or an uneven, wavy surface, we skim-coat it flat for a clean modern finish, or remove failed plaster and re-board with drywall. Both come up here, and we match whatever finish your Richford walls and ceilings already have.

Plaster over masonry and chimney breasts

A different substrate again

Plaster applied directly to brick or block in an older Richford home has no lath and no keys — it bonds to the masonry itself.

Common failure

It fails where damp has reached the masonry, and repairing the surface without addressing the moisture just moves the problem along the wall. We look for the source before quoting the repair.

How it works

Simple, clean, on schedule — Plaster Repair in Richford Edmonton

Free quote

We come out to your Richford Edmonton property, take a real look at the plaster repair, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every plaster repair quote in Richford Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the plaster repair in Richford Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Richford Edmonton home while we finish the plaster repair to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished plaster repair with us and you're happy with the result in Richford Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the plaster repair contractor Richford Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your plaster repair project in Richford Edmonton.

Read our reviews on Google

FAQ — Plaster Repair Richford Edmonton

Plaster Repair Richford Edmonton: your questions answered

My Richford ceiling has a sag in it. Is that urgent?: Treat it as urgent. A sagging plaster ceiling has lost its keys and is holding itself against gravity. Keep people out from under it and call us. We will tell you whether it can be re-secured with plaster washers or has to come down.
Do you stand behind your plaster repair in Richford in Edmonton?: Yes. We walk every Richford job with you before we pack up, and if something is not right we come back and make it right.
Is it cheaper to board over the plaster instead?: Sometimes. Once roughly a third of a wall has failed, boarding over and skimming usually buys a better wall for the money than rebuilding the plaster. If the plaster is largely sound, repairing costs less and keeps the character. We quote the one we would actually do.
Do you repair plaster in Richford?: Yes — plaster repair in Richford is part of our regular service area, and we are usually booked within the week. We also cover Allard, Ambleside, Blackburne and Southwest.
Do you work on lath-and-plaster and on modern veneer plaster?: Both. Wood-lath and gypsum-lath plaster in older Richford homes, and veneer plaster over blueboard in newer builds. The failure modes are different, so we identify which you have before quoting.
Do you work on plaster over brick?: Yes, and it is a different substrate — no lath, no keys, bonded to the masonry. It fails where damp has reached the brick, so we look for the moisture source before quoting, or the problem just moves along the wall.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Plaster Repair Richford Edmonton

Cracked and bulging plaster in Richford, re-anchored and skimmed flat