Do you repair Ormsby Place plaster that has separated from the lath?

Yes. Separated Ormsby Place plaster gets re-anchored to the lath — or failed sections replaced — then skimmed and blended invisible.

Repair or full-wall skim — which is right for Ormsby Place plaster?

It depends on the wall. A few cracks in solid Ormsby Place plaster we spot-fix; walls with extensive cracking or waviness do better skimmed flat. We give you a straight answer for your Ormsby Place home.

Do you stand behind your plaster repair in Ormsby Place?

Yes. We walk every Ormsby Place job with you before we pack up, and if something is not right we come back and make it right.

My Ormsby Place plaster is bulging off the lath — fixable?

Yes. In Ormsby Place we re-fasten lath-separated plaster or replace what has failed, finishing with a skim-blend that hides the repair.

Will the repair crack again?

Not if it is taped rather than only filled. Cracks that follow building movement need tape across them so the repair can flex. Filler alone bridges the gap and re-cracks in the first dry spell, which is the usual reason an earlier Ormsby Place repair failed.

Do you work on lath-and-plaster and on modern veneer plaster?

Both. Wood-lath and gypsum-lath plaster in older Ormsby Place homes, and veneer plaster over blueboard in newer builds. The failure modes are different, so we identify which you have before quoting.

Plaster Repair Ormsby Place Edmonton | Lath & Plaster

Plaster repair in Ormsby Place, blended into the original wall

Plaster does not fail the way drywall does. In Ormsby Place the first sign is usually a hairline crack tracking off a door or window corner, or a soft spot in a ceiling where the keys have let go of the lath. We work out which of those you have before quoting, because a surface crack and a delaminated ceiling are different jobs at different costs.

Blending plaster repairs into drywall additions
Texture matched where the surrounding plaster is textured
Plaster crack repair — hairline to structural cracks in Ormsby Place
Skim coating over sound plaster for a flat modern finish
Dust-controlled work in older Ormsby Place homes
Patching holes and crumbling edges
Ormsby Place coverage — we come to you

Water-damaged plaster in Ormsby Place

Find the source first

We do not repair water-damaged Ormsby Place plaster until the leak is fixed and the substrate is dry, because plaster over damp lath fails again within a season.

What has to come out

Water breaks the bond between plaster and lath and rots the keys even where the surface still looks solid. Stained plaster gets sounded well past the visible mark and cut back to material that is genuinely sound, then rebuilt and blended. Where the stain sits only in the paint film and the plaster behind it rings solid, a stain-blocking primer and a skim is the honest fix.

Ormsby Place drywall in context

About Ormsby Place

Named for the man responsible for developing Edmonton's grid system of numbering streets and avenues, Ormsby Place is located in the City's west end.

What we see in Ormsby Place

In Ormsby Place the drywall work is popcorn and stipple ceiling removal, settling+truss-uplift cracks, nail pops, Poly-B repipe patching repipe patching. We confirm what your home actually needs on site, in writing, before anything starts.

Corner beads in plaster walls

Metal that rusts

Older Ormsby Place plaster corners often have metal bead beneath, and where moisture has reached it the rust expands and pushes the plaster off from behind.

Why filling fails

Filling that corner without dealing with the corroded bead means the same failure returns, because the cause is still expanding. The bead section comes out and is replaced.

Gypsum lath and the middle era

Between lath and drywall

Many mid-century Ormsby Place homes have small gypsum board panels — often called rock lath — with a plaster skim over them, rather than wood lath.

How it fails

It fails at the panel joints rather than by losing keys, so the cracking pattern is more regular. Identifying which system you have changes both the diagnosis and the repair, so it is the first thing we look at.

Matching a repair into an old Ormsby Place wall

Flat is not always right

An invisible plaster repair is not the flattest patch, it is the patch that matches what surrounds it. Old Ormsby Place plaster is rarely dead flat and often carries a light sand or trowel texture. A perfectly flat patch in the middle of it reads as a rectangle under side light.

Feathering and texture

We feather the skim well past the repair so there is no edge to catch the light, then match the surrounding texture before priming. Where a wall is too uneven to blend into, skimming the whole wall gives a better result than fighting the join.

Living with a heritage Ormsby Place interior

Mouldings and detail

Older homes often carry plaster cornice, ceiling roses and picture rails. Careless repair destroys detail that cannot easily be replaced.

How we work around it

We ask before starting what is being kept, work back to a natural break in the moulding rather than through it, and say honestly where a detail cannot be matched rather than damaging it and apologising afterwards.

Horsehair and the really old Ormsby Place plaster

What you may have

The oldest plaster in Ormsby Place homes is lime-based with animal hair worked in as reinforcement, applied over wood lath in three coats.

Why it matters

It behaves differently from modern gypsum plaster — softer, more flexible, and it dislikes modern hard fillers, which crack at the boundary. Where we find it, the repair uses a compatible material rather than whatever is on the truck.

How it works

Simple, clean, on schedule — Plaster Repair in Ormsby Place Edmonton

Free quote

We come out to your Ormsby Place Edmonton property, take a real look at the plaster repair, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every plaster repair quote in Ormsby Place Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the plaster repair in Ormsby Place Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Ormsby Place Edmonton home while we finish the plaster repair to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished plaster repair with us and you're happy with the result in Ormsby Place Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the plaster repair contractor Ormsby Place Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your plaster repair project in Ormsby Place Edmonton.

Read our reviews on Google

FAQ — Plaster Repair Ormsby Place Edmonton

Plaster Repair Ormsby Place Edmonton: your questions answered

Do you repair Ormsby Place plaster that has separated from the lath?: Yes. Separated Ormsby Place plaster gets re-anchored to the lath — or failed sections replaced — then skimmed and blended invisible.
Repair or full-wall skim — which is right for Ormsby Place plaster?: It depends on the wall. A few cracks in solid Ormsby Place plaster we spot-fix; walls with extensive cracking or waviness do better skimmed flat. We give you a straight answer for your Ormsby Place home.
Do you stand behind your plaster repair in Ormsby Place in Edmonton?: Yes. We walk every Ormsby Place job with you before we pack up, and if something is not right we come back and make it right.
My Ormsby Place plaster is bulging off the lath — fixable?: Yes. In Ormsby Place we re-fasten lath-separated plaster or replace what has failed, finishing with a skim-blend that hides the repair.
Will the repair crack again?: Not if it is taped rather than only filled. Cracks that follow building movement need tape across them so the repair can flex. Filler alone bridges the gap and re-cracks in the first dry spell, which is the usual reason an earlier Ormsby Place repair failed.
Do you work on lath-and-plaster and on modern veneer plaster?: Both. Wood-lath and gypsum-lath plaster in older Ormsby Place homes, and veneer plaster over blueboard in newer builds. The failure modes are different, so we identify which you have before quoting.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Plaster Repair Ormsby Place Edmonton

Plaster repair in Ormsby Place, blended into the original wall