Can you match plaster to my drywall reno in Sherwood?

Yes — blending old plaster into new drywall is common in Sherwood renos. Thickness and texture get matched on Sherwood repairs — no visible line under paint.

Can you match the texture on my old Sherwood walls?

Yes. We feather the skim well past the repair and match the surrounding texture before priming, so the patch does not read as a rectangle under side light. Where a wall is too uneven to blend into, we will tell you that skimming the whole wall gives a better result.

Do you work on plaster over brick?

Yes, and it is a different substrate — no lath, no keys, bonded to the masonry. It fails where damp has reached the brick, so we look for the moisture source before quoting, or the problem just moves along the wall.

The corner of my plaster wall is bubbling. Why?

Often a corroded metal bead beneath. Rust expands and pushes the plaster off from behind, so filling it just brings the same failure back. That bead section has to come out and be replaced.

Is spot repair enough for my Sherwood plaster, or should the wall be skimmed?

It depends on the wall. In Sherwood, isolated cracks in sound plaster mean spot repair — widespread cracking or waves mean a full skim. We give you a straight answer for your Sherwood home.

Is it cheaper to board over the plaster instead?

Sometimes. Once roughly a third of a wall has failed, boarding over and skimming usually buys a better wall for the money than rebuilding the plaster. If the plaster is largely sound, repairing costs less and keeps the character. We quote the one we would actually do.

Plaster Repair Sherwood Edmonton | Lath & Plaster

Lath-and-plaster repair in Sherwood without gutting the room

As older Sherwood houses settle, the plaster tells the story: hairline cracking, lath separation bulges, crumbling around past repairs. In Sherwood we repair plaster walls and ceilings and blend the work into the surrounding surface, or skim the whole wall to a flat modern finish. Sherwood is one of Jasper Place's newer communities, where fresh installation and first-year settling work are common, so plaster work here ranges from spot crack repair to full-wall resurfacing. We cover Sherwood, Britannia Youngstown, Canora, Crestwood and Jasper Place, 7 days a week.

Blending plaster repairs into drywall additions
Bulging plaster re-anchored to the lath with plaster washers
Patching holes and crumbling edges
Sherwood coverage — we come to you
Bulging plaster re-anchored to the lath in Sherwood homes
Water-damaged plaster cut back to sound material
Plaster crack repair — hairline to structural cracks in Sherwood

Corner beads in plaster walls

Metal that rusts

Older Sherwood plaster corners often have metal bead beneath, and where moisture has reached it the rust expands and pushes the plaster off from behind.

Why filling fails

Filling that corner without dealing with the corroded bead means the same failure returns, because the cause is still expanding. The bead section comes out and is replaced.

Sherwood drywall in context

About Sherwood

Annexed to the City in 1964, Sherwood was once part of the Town of Jasper Place.

What we see in Sherwood

In Sherwood the drywall work is plaster and lath repair, popcorn and stipple ceiling removal, careful patching into original surfaces. We confirm what your home actually needs on site, in writing, before anything starts.

Plaster or skim-coat? What is right for your Sherwood home

Keeping the plaster

Where the plaster in your Sherwood home is largely sound, we repair the damaged areas and blend — the most cost-effective option.

Skimming to a modern finish

Where a wall has widespread cracking or an uneven, wavy surface, we skim-coat it flat for a clean modern finish, or remove failed plaster and re-board with drywall. Both come up here, and we match whatever finish your Sherwood walls and ceilings already have.

Horsehair and the really old Sherwood plaster

What you may have

The oldest plaster in Sherwood homes is lime-based with animal hair worked in as reinforcement, applied over wood lath in three coats.

Why it matters

It behaves differently from modern gypsum plaster — softer, more flexible, and it dislikes modern hard fillers, which crack at the boundary. Where we find it, the repair uses a compatible material rather than whatever is on the truck.

Hairline crazing across a whole wall

Not the same as a crack

A network of fine random cracking across an Sherwood plaster surface is usually shrinkage in the finish coat or a paint film failing, not structural movement.

What it needs

Not filling — that leaves a wall of filled lines. It needs the surface stabilised and skimmed as a whole, which is why it is priced by the wall rather than by the crack.

Living in the house while Sherwood plaster is repaired

Dust is the real disruption

Plaster repair makes fine dust that travels, so containment matters more here than on new work. We seal the working area, cover floors, and run the sanding to a vacuum where the job allows it.

Sequencing around you

Plaster repairs cure in coats, so a room is usually worked over several visits rather than one long day. We sequence so the space is usable between coats wherever possible, and we say up front which days it genuinely will not be.

Matching a repair into an old Sherwood wall

Flat is not always right

An invisible plaster repair is not the flattest patch, it is the patch that matches what surrounds it. Old Sherwood plaster is rarely dead flat and often carries a light sand or trowel texture. A perfectly flat patch in the middle of it reads as a rectangle under side light.

Feathering and texture

We feather the skim well past the repair so there is no edge to catch the light, then match the surrounding texture before priming. Where a wall is too uneven to blend into, skimming the whole wall gives a better result than fighting the join.

How it works

Simple, clean, on schedule — Plaster Repair in Sherwood Edmonton

Free quote

We come out to your Sherwood Edmonton property, take a real look at the plaster repair, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every plaster repair quote in Sherwood Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the plaster repair in Sherwood Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Sherwood Edmonton home while we finish the plaster repair to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished plaster repair with us and you're happy with the result in Sherwood Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the plaster repair contractor Sherwood Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your plaster repair project in Sherwood Edmonton.

Read our reviews on Google

FAQ — Plaster Repair Sherwood Edmonton

Plaster Repair Sherwood Edmonton: your questions answered

Can you match plaster to my drywall reno in Sherwood?: Yes — blending old plaster into new drywall is common in Sherwood renos. Thickness and texture get matched on Sherwood repairs — no visible line under paint.
Can you match the texture on my old Sherwood walls?: Yes. We feather the skim well past the repair and match the surrounding texture before priming, so the patch does not read as a rectangle under side light. Where a wall is too uneven to blend into, we will tell you that skimming the whole wall gives a better result.
Do you work on plaster over brick?: Yes, and it is a different substrate — no lath, no keys, bonded to the masonry. It fails where damp has reached the brick, so we look for the moisture source before quoting, or the problem just moves along the wall.
The corner of my plaster wall is bubbling. Why?: Often a corroded metal bead beneath. Rust expands and pushes the plaster off from behind, so filling it just brings the same failure back. That bead section has to come out and be replaced.
Is spot repair enough for my Sherwood plaster, or should the wall be skimmed?: It depends on the wall. In Sherwood, isolated cracks in sound plaster mean spot repair — widespread cracking or waves mean a full skim. We give you a straight answer for your Sherwood home.
Is it cheaper to board over the plaster instead?: Sometimes. Once roughly a third of a wall has failed, boarding over and skimming usually buys a better wall for the money than rebuilding the plaster. If the plaster is largely sound, repairing costs less and keeps the character. We quote the one we would actually do.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Plaster Repair Sherwood Edmonton

Lath-and-plaster repair in Sherwood without gutting the room