Do you work on lath-and-plaster and on modern veneer plaster?

Both. Wood-lath and gypsum-lath plaster in older Kildare homes, and veneer plaster over blueboard in newer builds. The failure modes are different, so we identify which you have before quoting.

Can you match the texture on my old Kildare walls?

Yes. We feather the skim well past the repair and match the surrounding texture before priming, so the patch does not read as a rectangle under side light. Where a wall is too uneven to blend into, we will tell you that skimming the whole wall gives a better result.

Can you match plaster to my drywall reno in Kildare?

Yes — blending old plaster into new drywall is common in Kildare renos. Thickness and texture get matched on Kildare repairs — no visible line under paint.

The corner of my plaster wall is bubbling. Why?

Often a corroded metal bead beneath. Rust expands and pushes the plaster off from behind, so filling it just brings the same failure back. That bead section has to come out and be replaced.

Is spot repair enough for my Kildare plaster, or should the wall be skimmed?

It depends on the wall. In Kildare, isolated cracks in sound plaster mean spot repair — widespread cracking or waves mean a full skim. We give you a straight answer for your Kildare home.

Do you repair Kildare plaster that has separated from the lath?

Yes. Separated Kildare plaster gets re-anchored to the lath — or failed sections replaced — then skimmed and blended invisible.

Plaster Repair Kildare Edmonton | Lath & Plaster

Lath-and-plaster repair in Kildare without gutting the room

As older Kildare houses settle, the plaster tells the story: hairline cracking, lath separation bulges, crumbling around past repairs. In Kildare we repair plaster walls and ceilings and blend the work into the surrounding surface, or skim the whole wall to a flat modern finish. Kildare is one of Northeast's newer communities, where fresh installation and first-year settling work are common, so plaster work here ranges from spot crack repair to full-wall resurfacing. We cover Kildare, Balwin, Bannerman, Belmont and Northeast, 7 days a week.

Delaminated Kildare ceilings re-secured or rebuilt
Skim-coating plaster to a flat modern finish
Bulging plaster re-anchored to the lath with plaster washers
Plaster crack repair — hairline to structural cracks in Kildare
Texture matched where the surrounding plaster is textured
Kildare coverage — we come to you
Blending plaster repairs into drywall additions

What affects the cost of plaster repair in Kildare in Edmonton?

Crack repair vs bulging plaster

The cost of plaster repair in Kildare depends on whether it is a surface crack, bulging plaster that has separated from the lath, or a failed section that needs cutting out. Quick fixes in Kildare are the surface cracks — failed plaster needing re-securing or replacement takes longer and more material. We assess on site and give a fixed price first.

Repair vs skim-over in Kildare

Many plaster walls here are best skim-coated over once the damage is stabilised — it brings an old wall back to a flat, modern finish rather than chasing endless cracks. We tell you honestly which makes sense for your Kildare home.

Kildare drywall in context

About Kildare

Kildare, in the City's northeast, is named for an Irish county.

What we see in Kildare

In Kildare the drywall work is plaster and lath repair, popcorn and stipple ceiling removal, careful patching into original surfaces. We confirm what your home actually needs on site, in writing, before anything starts.

Corner beads in plaster walls

Metal that rusts

Older Kildare plaster corners often have metal bead beneath, and where moisture has reached it the rust expands and pushes the plaster off from behind.

Why filling fails

Filling that corner without dealing with the corroded bead means the same failure returns, because the cause is still expanding. The bead section comes out and is replaced.

Plaster ceilings, and why they are treated differently

Gravity is the difference

A wall that has separated from its lath will sit there for years. A Kildare ceiling that has separated is holding itself up against gravity, and it lets go in sheets. Any sag, any springiness, and we treat the ceiling as a safety item rather than a cosmetic one.

Re-secure or rebuild

Where the plaster is sound but the keys are tired, plaster washers screwed through into the joists pull it back tight. Where it is crumbling, that section comes down and is rebuilt in board, then skimmed so the ceiling reads as one continuous surface.

Hairline crazing across a whole wall

Not the same as a crack

A network of fine random cracking across an Kildare plaster surface is usually shrinkage in the finish coat or a paint film failing, not structural movement.

What it needs

Not filling — that leaves a wall of filled lines. It needs the surface stabilised and skimmed as a whole, which is why it is priced by the wall rather than by the crack.

Why Kildare plaster cracks in the first place

Movement, not bad workmanship

Most cracking in Kildare plaster is seasonal movement rather than a defect. Alberta humidity swings move a timber frame, and plaster is rigid, so it relieves that stress at its weakest points: the corners of door and window openings, and the joint between ceiling and wall.

What that means for the repair

A crack that moves has to be taped, not just filled. Filler on its own bridges the gap and re-cracks in the first dry spell. We tape across the crack so the repair can take the movement, then skim it out flat.

Horsehair and the really old Kildare plaster

What you may have

The oldest plaster in Kildare homes is lime-based with animal hair worked in as reinforcement, applied over wood lath in three coats.

Why it matters

It behaves differently from modern gypsum plaster — softer, more flexible, and it dislikes modern hard fillers, which crack at the boundary. Where we find it, the repair uses a compatible material rather than whatever is on the truck.

How it works

Simple, clean, on schedule — Plaster Repair in Kildare Edmonton

Free quote

We come out to your Kildare Edmonton property, take a real look at the plaster repair, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every plaster repair quote in Kildare Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the plaster repair in Kildare Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Kildare Edmonton home while we finish the plaster repair to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished plaster repair with us and you're happy with the result in Kildare Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the plaster repair contractor Kildare Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your plaster repair project in Kildare Edmonton.

Read our reviews on Google

FAQ — Plaster Repair Kildare Edmonton

Plaster Repair Kildare Edmonton: your questions answered

Do you work on lath-and-plaster and on modern veneer plaster?: Both. Wood-lath and gypsum-lath plaster in older Kildare homes, and veneer plaster over blueboard in newer builds. The failure modes are different, so we identify which you have before quoting.
Can you match the texture on my old Kildare walls?: Yes. We feather the skim well past the repair and match the surrounding texture before priming, so the patch does not read as a rectangle under side light. Where a wall is too uneven to blend into, we will tell you that skimming the whole wall gives a better result.
Can you match plaster to my drywall reno in Kildare?: Yes — blending old plaster into new drywall is common in Kildare renos. Thickness and texture get matched on Kildare repairs — no visible line under paint.
The corner of my plaster wall is bubbling. Why?: Often a corroded metal bead beneath. Rust expands and pushes the plaster off from behind, so filling it just brings the same failure back. That bead section has to come out and be replaced.
Is spot repair enough for my Kildare plaster, or should the wall be skimmed?: It depends on the wall. In Kildare, isolated cracks in sound plaster mean spot repair — widespread cracking or waves mean a full skim. We give you a straight answer for your Kildare home.
Do you repair Kildare plaster that has separated from the lath?: Yes. Separated Kildare plaster gets re-anchored to the lath — or failed sections replaced — then skimmed and blended invisible.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Plaster Repair Kildare Edmonton

Lath-and-plaster repair in Kildare without gutting the room