My Edgemont plaster is bulging off the lath — fixable?

Yes. In Edgemont we re-fasten lath-separated plaster or replace what has failed, finishing with a skim-blend that hides the repair.

My Edgemont ceiling has a sag in it. Is that urgent?

Treat it as urgent. A sagging plaster ceiling has lost its keys and is holding itself against gravity. Keep people out from under it and call us. We will tell you whether it can be re-secured with plaster washers or has to come down.

My old walls have hairline cracks all over. What is that?

Usually crazing — shrinkage in the finish coat or a failing paint film rather than structural movement. Filling each line leaves a wall of filled lines; it needs the surface stabilised and skimmed as a whole.

Can loose plaster be saved without removing it?

Usually yes, if the plaster itself is still strong. Plaster washers screwed into the lath or joists pull it back and hold it, sometimes with adhesive behind. It preserves the original surface and costs less than removal.

The corner of my plaster wall is bubbling. Why?

Often a corroded metal bead beneath. Rust expands and pushes the plaster off from behind, so filling it just brings the same failure back. That bead section has to come out and be replaced.

Is it cheaper to board over the plaster instead?

Sometimes. Once roughly a third of a wall has failed, boarding over and skimming usually buys a better wall for the money than rebuilding the plaster. If the plaster is largely sound, repairing costs less and keeps the character. We quote the one we would actually do.

Plaster Repair Edgemont Edmonton | Lath & Plaster

Cracked and bulging plaster in Edgemont, re-anchored and skimmed flat

As older Edgemont houses settle, the plaster tells the story: hairline cracking, lath separation bulges, crumbling around past repairs. In Edgemont we repair plaster walls and ceilings and blend the work into the surrounding surface, or skim the whole wall to a flat modern finish. Edgemont is this established West Henday community where reno, repair and ceiling drywall are common, so plaster work here ranges from spot crack repair to full-wall resurfacing. We cover Edgemont, Breckenridge Greens, Glastonbury, Granville and West Henday, 7 days a week.

Skim-coating plaster to a flat modern finish
Edgemont coverage — we come to you
Blending plaster repairs into drywall additions
Patching holes and crumbling edges
Texture matched where the surrounding plaster is textured
Skim coating over sound plaster for a flat modern finish
Water-damaged plaster cut back to sound material

Corner beads in plaster walls

Metal that rusts

Older Edgemont plaster corners often have metal bead beneath, and where moisture has reached it the rust expands and pushes the plaster off from behind.

Why filling fails

Filling that corner without dealing with the corroded bead means the same failure returns, because the cause is still expanding. The bead section comes out and is replaced.

Plaster ceilings, and why they are treated differently

Gravity is the difference

A wall that has separated from its lath will sit there for years. A Edgemont ceiling that has separated is holding itself up against gravity, and it lets go in sheets. Any sag, any springiness, and we treat the ceiling as a safety item rather than a cosmetic one.

Re-secure or rebuild

Where the plaster is sound but the keys are tired, plaster washers screwed through into the joists pull it back tight. Where it is crumbling, that section comes down and is rebuilt in board, then skimmed so the ceiling reads as one continuous surface.

Gypsum lath and the middle era

Between lath and drywall

Many mid-century Edgemont homes have small gypsum board panels — often called rock lath — with a plaster skim over them, rather than wood lath.

How it fails

It fails at the panel joints rather than by losing keys, so the cracking pattern is more regular. Identifying which system you have changes both the diagnosis and the repair, so it is the first thing we look at.

Matching a repair into an old Edgemont wall

Flat is not always right

An invisible plaster repair is not the flattest patch, it is the patch that matches what surrounds it. Old Edgemont plaster is rarely dead flat and often carries a light sand or trowel texture. A perfectly flat patch in the middle of it reads as a rectangle under side light.

Feathering and texture

We feather the skim well past the repair so there is no edge to catch the light, then match the surrounding texture before priming. Where a wall is too uneven to blend into, skimming the whole wall gives a better result than fighting the join.

Our Edgemont plaster repair process in Edmonton, step by step

Stabilise the plaster first

A plaster repair in Edgemont only lasts if the plaster is stable. Pulled-away Edgemont plaster gets re-anchored; crumbling sections get cut back to sound material first. That skipped step is why Edgemont plaster patches so often re-crack.

Patch, skim, blend

The right plaster-grade material goes in, the area or full wall gets skimmed flat, edges feathered wide, then sanded paint-ready. In most Edgemont homes, once it is painted you will not find where we worked.

Living in the house while Edgemont plaster is repaired

Dust is the real disruption

Plaster repair makes fine dust that travels, so containment matters more here than on new work. We seal the working area, cover floors, and run the sanding to a vacuum where the job allows it.

Sequencing around you

Plaster repairs cure in coats, so a room is usually worked over several visits rather than one long day. We sequence so the space is usable between coats wherever possible, and we say up front which days it genuinely will not be.

How it works

Simple, clean, on schedule — Plaster Repair in Edgemont Edmonton

Free quote

We come out to your Edgemont Edmonton property, take a real look at the plaster repair, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every plaster repair quote in Edgemont Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the plaster repair in Edgemont Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Edgemont Edmonton home while we finish the plaster repair to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished plaster repair with us and you're happy with the result in Edgemont Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the plaster repair contractor Edgemont Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your plaster repair project in Edgemont Edmonton.

Read our reviews on Google

FAQ — Plaster Repair Edgemont Edmonton

Plaster Repair Edgemont Edmonton: your questions answered

My Edgemont plaster is bulging off the lath — fixable?: Yes. In Edgemont we re-fasten lath-separated plaster or replace what has failed, finishing with a skim-blend that hides the repair.
My Edgemont ceiling has a sag in it. Is that urgent?: Treat it as urgent. A sagging plaster ceiling has lost its keys and is holding itself against gravity. Keep people out from under it and call us. We will tell you whether it can be re-secured with plaster washers or has to come down.
My old walls have hairline cracks all over. What is that?: Usually crazing — shrinkage in the finish coat or a failing paint film rather than structural movement. Filling each line leaves a wall of filled lines; it needs the surface stabilised and skimmed as a whole.
Can loose plaster be saved without removing it?: Usually yes, if the plaster itself is still strong. Plaster washers screwed into the lath or joists pull it back and hold it, sometimes with adhesive behind. It preserves the original surface and costs less than removal.
The corner of my plaster wall is bubbling. Why?: Often a corroded metal bead beneath. Rust expands and pushes the plaster off from behind, so filling it just brings the same failure back. That bead section has to come out and be replaced.
Is it cheaper to board over the plaster instead?: Sometimes. Once roughly a third of a wall has failed, boarding over and skimming usually buys a better wall for the money than rebuilding the plaster. If the plaster is largely sound, repairing costs less and keeps the character. We quote the one we would actually do.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Plaster Repair Edgemont Edmonton

Cracked and bulging plaster in Edgemont, re-anchored and skimmed flat