The corner of my plaster wall is bubbling. Why?

Often a corroded metal bead beneath. Rust expands and pushes the plaster off from behind, so filling it just brings the same failure back. That bead section has to come out and be replaced.

Repair or full-wall skim — which is right for Fraser plaster?

It depends on the wall. A few cracks in solid Fraser plaster we spot-fix; walls with extensive cracking or waviness do better skimmed flat. We give you a straight answer for your Fraser home.

Is spot repair enough for my Fraser plaster, or should the wall be skimmed?

It depends on the wall. In Fraser, isolated cracks in sound plaster mean spot repair — widespread cracking or waves mean a full skim. We give you a straight answer for your Fraser home.

Can you match plaster to my drywall reno in Fraser?

Yes — blending old plaster into new drywall is common in Fraser renos. Thickness and texture get matched on Fraser repairs — no visible line under paint.

Will you damage my plaster mouldings?

Not knowingly. We ask what is being kept before starting and work back to a natural break in the moulding rather than through it. Where a detail cannot be matched we say so beforehand rather than apologising after.

Do you stand behind your plaster repair in Fraser?

Yes. We walk every Fraser job with you before we pack up, and if something is not right we come back and make it right.

Plaster Repair Fraser Edmonton | Lath & Plaster

Lath-and-plaster repair in Fraser without gutting the room

As older Fraser houses settle, the plaster tells the story: hairline cracking, lath separation bulges, crumbling around past repairs. In Fraser we repair plaster walls and ceilings and blend the work into the surrounding surface, or skim the whole wall to a flat modern finish. Fraser is this established Northeast community where reno, repair and ceiling drywall are common, so plaster work here ranges from spot crack repair to full-wall resurfacing. We cover Fraser, Balwin, Bannerman, Belmont and Northeast, 7 days a week.

Skim-coating plaster to a flat modern finish
Plaster crack repair — hairline to structural cracks in Fraser
Fraser coverage — we come to you
Patching holes and crumbling edges
Water-damaged plaster cut back to sound material
Bulging plaster re-anchored to the lath with plaster washers
Hairline and settlement crack repair in Fraser

Water-damaged plaster in Fraser

Find the source first

We do not repair water-damaged Fraser plaster until the leak is fixed and the substrate is dry, because plaster over damp lath fails again within a season.

What has to come out

Water breaks the bond between plaster and lath and rots the keys even where the surface still looks solid. Stained plaster gets sounded well past the visible mark and cut back to material that is genuinely sound, then rebuilt and blended. Where the stain sits only in the paint film and the plaster behind it rings solid, a stain-blocking primer and a skim is the honest fix.

Fraser drywall in context

About Fraser

Named for John Fraser, an original homesteader in the area and one of the first trustees of the Belmont School, Fraser is located in the City's far northwest.

What we see in Fraser

In Fraser the drywall work is popcorn and stipple ceiling removal, settling+truss-uplift cracks, nail pops, Poly-B repipe patching repipe patching. We confirm what your home actually needs on site, in writing, before anything starts.

Reattaching plaster without removing it

Washers and adhesive

Where Fraser plaster has separated but is otherwise sound, plaster washers screwed through into the lath or joists pull it back and hold it, sometimes with an injected adhesive behind.

Why it is worth doing

It preserves the original surface, is far less disruptive than removal, and costs less. It only works where the plaster itself is still strong, which is what the sounding test establishes.

Why Fraser homeowners trust Emplastrum for plaster repair in Edmonton

We finish to match the original

We are a mudding and taping specialist, so blending a plaster repair into an old Fraser wall — matching the texture and the plane — is exactly the work we are known for.

Fixed price, same-day reply

We repair plaster across Fraser and Northeast, 7 days a week. The Fraser quote is free, the price fixed, your floors and furniture protected, the dust controlled — and the repair backed. Not right in Fraser? We come back and correct it.

Living with a heritage Fraser interior

Mouldings and detail

Older homes often carry plaster cornice, ceiling roses and picture rails. Careless repair destroys detail that cannot easily be replaced.

How we work around it

We ask before starting what is being kept, work back to a natural break in the moulding rather than through it, and say honestly where a detail cannot be matched rather than damaging it and apologising afterwards.

Repairing plaster against boarding over it

Two honest options

Some Fraser rooms are past patching. Then the choice is rebuilding the plaster or boarding over it with drywall and skimming. Boarding is faster and flatter. It also buries the original surface and costs a little ceiling height and any plaster detail.

How we decide with you

If the plaster is largely sound, repairing keeps the character and costs less. Once roughly a third of a wall has failed, boarding over usually buys a better wall for the money. We tell you which one we would do, and why, before you commit to either.

Plaster or skim-coat? What is right for your Fraser home

Keeping the plaster

Where the plaster in your Fraser home is largely sound, we repair the damaged areas and blend — the most cost-effective option.

Skimming to a modern finish

Where a wall has widespread cracking or an uneven, wavy surface, we skim-coat it flat for a clean modern finish, or remove failed plaster and re-board with drywall. Both come up here, and we match whatever finish your Fraser walls and ceilings already have.

How it works

Simple, clean, on schedule — Plaster Repair in Fraser Edmonton

Free quote

We come out to your Fraser Edmonton property, take a real look at the plaster repair, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every plaster repair quote in Fraser Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the plaster repair in Fraser Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Fraser Edmonton home while we finish the plaster repair to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished plaster repair with us and you're happy with the result in Fraser Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the plaster repair contractor Fraser Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your plaster repair project in Fraser Edmonton.

Read our reviews on Google

FAQ — Plaster Repair Fraser Edmonton

Plaster Repair Fraser Edmonton: your questions answered

The corner of my plaster wall is bubbling. Why?: Often a corroded metal bead beneath. Rust expands and pushes the plaster off from behind, so filling it just brings the same failure back. That bead section has to come out and be replaced.
Repair or full-wall skim — which is right for Fraser plaster?: It depends on the wall. A few cracks in solid Fraser plaster we spot-fix; walls with extensive cracking or waviness do better skimmed flat. We give you a straight answer for your Fraser home.
Is spot repair enough for my Fraser plaster, or should the wall be skimmed?: It depends on the wall. In Fraser, isolated cracks in sound plaster mean spot repair — widespread cracking or waves mean a full skim. We give you a straight answer for your Fraser home.
Can you match plaster to my drywall reno in Fraser?: Yes — blending old plaster into new drywall is common in Fraser renos. Thickness and texture get matched on Fraser repairs — no visible line under paint.
Will you damage my plaster mouldings?: Not knowingly. We ask what is being kept before starting and work back to a natural break in the moulding rather than through it. Where a detail cannot be matched we say so beforehand rather than apologising after.
Do you stand behind your plaster repair in Fraser in Edmonton?: Yes. We walk every Fraser job with you before we pack up, and if something is not right we come back and make it right.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Plaster Repair Fraser Edmonton

Lath-and-plaster repair in Fraser without gutting the room