Do you work on lath-and-plaster and on modern veneer plaster?

Both. Wood-lath and gypsum-lath plaster in older Lee Ridge homes, and veneer plaster over blueboard in newer builds. The failure modes are different, so we identify which you have before quoting.

Is it cheaper to board over the plaster instead?

Sometimes. Once roughly a third of a wall has failed, boarding over and skimming usually buys a better wall for the money than rebuilding the plaster. If the plaster is largely sound, repairing costs less and keeps the character. We quote the one we would actually do.

Can you repair Lee Ridge plaster without tearing the wall out?

In most cases, yes. If the plaster is still keyed to the lath it gets re-anchored and skimmed rather than removed. We only cut out sections that have genuinely failed, and we tell you on site which of the two you have.

Repair or full-wall skim — which is right for Lee Ridge plaster?

It depends on the wall. A few cracks in solid Lee Ridge plaster we spot-fix; walls with extensive cracking or waviness do better skimmed flat. We give you a straight answer for your Lee Ridge home.

My old walls have hairline cracks all over. What is that?

Usually crazing — shrinkage in the finish coat or a failing paint film rather than structural movement. Filling each line leaves a wall of filled lines; it needs the surface stabilised and skimmed as a whole.

Do you stand behind your plaster repair in Lee Ridge?

Yes. We walk every Lee Ridge job with you before we pack up, and if something is not right we come back and make it right.

Plaster Repair Lee Ridge Edmonton | Lath & Plaster

Lath-and-plaster repair in Lee Ridge without gutting the room

As older Lee Ridge houses settle, the plaster tells the story: hairline cracking, lath separation bulges, crumbling around past repairs. In Lee Ridge we repair plaster walls and ceilings and blend the work into the surrounding surface, or skim the whole wall to a flat modern finish. Lee Ridge is one of Mill Woods and Meadows's newer communities, where fresh installation and first-year settling work are common, so plaster work here ranges from spot crack repair to full-wall resurfacing. We cover Lee Ridge, Bisset, Crawford Plains, Daly Grove and Mill Woods and Meadows, 7 days a week.

Lee Ridge coverage — we come to you
Delaminated Lee Ridge ceilings re-secured or rebuilt
Texture matched where the surrounding plaster is textured
Blending plaster repairs into drywall additions
Dust-controlled work in older Lee Ridge homes
Skim-coating plaster to a flat modern finish
Hairline and settlement crack repair in Lee Ridge

Common plaster repair situations in Lee Ridge in Edmonton

In Lee Ridge, lee Ridge sits in Edmonton's Mill Woods and Meadows district. Lee Ridge, named for Robert Lee (Mayor of Edmonton, 1909 - 1910), is one of the 27 neighbourhoods of Mill Woods. Across roughly 1,000 homes here, the drywall work is plaster and lath repair, popcorn and stipple ceiling removal, careful patching into original surfaces. We cover Lee Ridge and the surrounding Mill Woods and Meadows district, 7 days a week. We handle all of it the same careful way — on-site quote, fixed price, done right.

Lee Ridge drywall in context

About Lee Ridge

Lee Ridge, named for Robert Lee (Mayor of Edmonton, 1909 - 1910), is one of the 27 neighbourhoods of Mill Woods.

What we see in Lee Ridge

In Lee Ridge the drywall work is plaster and lath repair, popcorn and stipple ceiling removal, careful patching into original surfaces. We confirm what your home actually needs on site, in writing, before anything starts.

Water-damaged plaster in Lee Ridge

Find the source first

We do not repair water-damaged Lee Ridge plaster until the leak is fixed and the substrate is dry, because plaster over damp lath fails again within a season.

What has to come out

Water breaks the bond between plaster and lath and rots the keys even where the surface still looks solid. Stained plaster gets sounded well past the visible mark and cut back to material that is genuinely sound, then rebuilt and blended. Where the stain sits only in the paint film and the plaster behind it rings solid, a stain-blocking primer and a skim is the honest fix.

Plaster or skim-coat? What is right for your Lee Ridge home

Keeping the plaster

Where the plaster in your Lee Ridge home is largely sound, we repair the damaged areas and blend — the most cost-effective option.

Skimming to a modern finish

Where a wall has widespread cracking or an uneven, wavy surface, we skim-coat it flat for a clean modern finish, or remove failed plaster and re-board with drywall. Both come up here, and we match whatever finish your Lee Ridge walls and ceilings already have.

Plaster ceilings, and why they are treated differently

Gravity is the difference

A wall that has separated from its lath will sit there for years. A Lee Ridge ceiling that has separated is holding itself up against gravity, and it lets go in sheets. Any sag, any springiness, and we treat the ceiling as a safety item rather than a cosmetic one.

Re-secure or rebuild

Where the plaster is sound but the keys are tired, plaster washers screwed through into the joists pull it back tight. Where it is crumbling, that section comes down and is rebuilt in board, then skimmed so the ceiling reads as one continuous surface.

Matching a repair into an old Lee Ridge wall

Flat is not always right

An invisible plaster repair is not the flattest patch, it is the patch that matches what surrounds it. Old Lee Ridge plaster is rarely dead flat and often carries a light sand or trowel texture. A perfectly flat patch in the middle of it reads as a rectangle under side light.

Feathering and texture

We feather the skim well past the repair so there is no edge to catch the light, then match the surrounding texture before priming. Where a wall is too uneven to blend into, skimming the whole wall gives a better result than fighting the join.

Why Lee Ridge plaster cracks in the first place

Movement, not bad workmanship

Most cracking in Lee Ridge plaster is seasonal movement rather than a defect. Alberta humidity swings move a timber frame, and plaster is rigid, so it relieves that stress at its weakest points: the corners of door and window openings, and the joint between ceiling and wall.

What that means for the repair

A crack that moves has to be taped, not just filled. Filler on its own bridges the gap and re-cracks in the first dry spell. We tape across the crack so the repair can take the movement, then skim it out flat.

How it works

Simple, clean, on schedule — Plaster Repair in Lee Ridge Edmonton

Free quote

We come out to your Lee Ridge Edmonton property, take a real look at the plaster repair, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every plaster repair quote in Lee Ridge Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the plaster repair in Lee Ridge Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Lee Ridge Edmonton home while we finish the plaster repair to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished plaster repair with us and you're happy with the result in Lee Ridge Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the plaster repair contractor Lee Ridge Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your plaster repair project in Lee Ridge Edmonton.

Read our reviews on Google

FAQ — Plaster Repair Lee Ridge Edmonton

Plaster Repair Lee Ridge Edmonton: your questions answered

Do you work on lath-and-plaster and on modern veneer plaster?: Both. Wood-lath and gypsum-lath plaster in older Lee Ridge homes, and veneer plaster over blueboard in newer builds. The failure modes are different, so we identify which you have before quoting.
Is it cheaper to board over the plaster instead?: Sometimes. Once roughly a third of a wall has failed, boarding over and skimming usually buys a better wall for the money than rebuilding the plaster. If the plaster is largely sound, repairing costs less and keeps the character. We quote the one we would actually do.
Can you repair Lee Ridge plaster without tearing the wall out?: In most cases, yes. If the plaster is still keyed to the lath it gets re-anchored and skimmed rather than removed. We only cut out sections that have genuinely failed, and we tell you on site which of the two you have.
Repair or full-wall skim — which is right for Lee Ridge plaster?: It depends on the wall. A few cracks in solid Lee Ridge plaster we spot-fix; walls with extensive cracking or waviness do better skimmed flat. We give you a straight answer for your Lee Ridge home.
My old walls have hairline cracks all over. What is that?: Usually crazing — shrinkage in the finish coat or a failing paint film rather than structural movement. Filling each line leaves a wall of filled lines; it needs the surface stabilised and skimmed as a whole.
Do you stand behind your plaster repair in Lee Ridge in Edmonton?: Yes. We walk every Lee Ridge job with you before we pack up, and if something is not right we come back and make it right.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Plaster Repair Lee Ridge Edmonton

Lath-and-plaster repair in Lee Ridge without gutting the room