Plaster Repair Tawa Edmonton

Lath-and-plaster repair in Tawa without gutting the room

As older Tawa houses settle, the plaster tells the story: hairline cracking, lath separation bulges, crumbling around past repairs. In Tawa we repair plaster walls and ceilings and blend the work into the surrounding surface, or skim the whole wall to a flat modern finish. Tawa is this established Mill Woods and Meadows community where reno, repair and ceiling drywall are common, so plaster work here ranges from spot crack repair to full-wall resurfacing. We cover Tawa, Bisset, Crawford Plains, Daly Grove and Mill Woods and Meadows, 7 days a week.

• Delaminated Tawa ceilings re-secured or rebuilt
• Bulging plaster re-anchored to the lath with plaster washers
• Dust-controlled work in older Tawa homes
• Texture matched where the surrounding plaster is textured
• Blending plaster repairs into drywall additions
• Water-damaged plaster cut back to sound material
• Bulging plaster re-anchored to the lath in Tawa homes

Plaster Repair Tawa Edmonton

Our Tawa plaster repair process in Edmonton, step by step

Tawa drywall in context

Living in the house while Tawa plaster is repaired

Living with a heritage Tawa interior

What affects the cost of plaster repair in Tawa in Edmonton?

Corner beads in plaster walls

Why Tawa homeowners trust Emplastrum for plaster repair in Edmonton

Simple, clean, on schedule — Plaster Repair in Tawa Edmonton

Plaster Repair Tawa Edmonton: your questions answered

Repair or full-wall skim — which is right for Tawa plaster?

It depends on the wall. A few cracks in solid Tawa plaster we spot-fix; walls with extensive cracking or waviness do better skimmed flat. We give you a straight answer for your Tawa home.

My old walls have hairline cracks all over. What is that?

Usually crazing — shrinkage in the finish coat or a failing paint film rather than structural movement. Filling each line leaves a wall of filled lines; it needs the surface stabilised and skimmed as a whole.

Is it cheaper to board over the plaster instead?

Sometimes. Once roughly a third of a wall has failed, boarding over and skimming usually buys a better wall for the money than rebuilding the plaster. If the plaster is largely sound, repairing costs less and keeps the character. We quote the one we would actually do.

Can loose plaster be saved without removing it?

Usually yes, if the plaster itself is still strong. Plaster washers screwed into the lath or joists pull it back and hold it, sometimes with adhesive behind. It preserves the original surface and costs less than removal.

Can you match the texture on my old Tawa walls?

Yes. We feather the skim well past the repair and match the surrounding texture before priming, so the patch does not read as a rectangle under side light. Where a wall is too uneven to blend into, we will tell you that skimming the whole wall gives a better result.

Will you damage my plaster mouldings?

Not knowingly. We ask what is being kept before starting and work back to a natural break in the moulding rather than through it. Where a detail cannot be matched we say so beforehand rather than apologising after.

Need Edmonton’s go-to drywall contractor for repair, restoration and finishing? One trusted team for boarding, taping, finishing, repairs & renovations — start to finish.