How do I know which rated assembly my Empire Park project needs?

It comes from your drawings or from the building official at permit stage, not from us and not from the board supplier. We build to the assembly you have been given, and if what is specified does not match what is on site we will tell you before boarding.

Can you finish the fire-rated board too?

Yes — your Empire Park separation passes code and looks properly finished, ready for paint.

Can I use 1/2 inch board if that is what is on site?

Not in a rated assembly. Type X is 5/8 inch because the core needs that mass and reinforcement to hold together under heat. It looks identical once finished and it is not the tested assembly — we check board against the specification.

Is a fire-rated wall also soundproof?

It helps a little because it is denser, but rating and acoustic performance are separate specifications. A suite separation usually needs both, built together. If sound is the real goal we would rather design for it explicitly.

Will it pass inspection in Empire Park?

Yes — we install the correct Type X assembly and seal penetrations to spec so your Empire Park separation passes inspection.

Fire-Rated Drywall Empire Park Edmonton | Type X Board

Type X board in Empire Park for garages, suites and mechanical rooms

In Empire Park the code decides: garage separations, basement suites and party walls must carry Type X board in a rated assembly to pass inspection and protect the home. In Empire Park we install fire-rated drywall to code and finish it clean. Empire Park is this established Scona community where reno, repair and ceiling drywall are common, so fire-rated work here is common on garages and suites. We cover Empire Park, Allendale, Argyll, Belgravia and Scona, 7 days a week.

Rated assemblies installed and sealed correctly
Type X board to the assembly on the drawings
Empire Park coverage — we come to you
Finished clean and inspection-ready
Basement legal-suite fire separations
Party walls between units
Type X fire-rated board to code in Empire Park

Coordinating with the electrician early

Boxes in rated walls

Outlet and switch boxes in a rated Empire Park assembly need treatment — spacing rules, pads or listed boxes — and back-to-back boxes are a particular problem.

Why early matters

Rearranging a box after board is up means opening a rated wall. Walking the wall with the electrician before boarding takes ten minutes and avoids that entirely.

Empire Park drywall in context

About Empire Park

Empire Park is a diverse neighbourhood, with residential, commercial, institutional and industrial land uses.

What we see in Empire Park

In Empire Park the drywall work is verify dominant band before writing notes. We confirm what your home actually needs on site, in writing, before anything starts.

Type X and Type C are not interchangeable

Two different boards

Type X is the common 5/8 inch rated board. Type C carries additional additives that resist shrinkage at high heat and is specified where an assembly — often a ceiling — depends on the board staying in place longer.

Substituting downward fails

Where drawings call for Type C, Type X is not an equivalent, and an inspector who spots it will fail the assembly. We order to the specification on your Empire Park drawings and tell you if what is on site does not match it.

Fire-rated garages, suites and party walls in Empire Park

Garage firewalls

The most common fire-rated job in Empire Park is the garage-to-house separation — Type X board on the common wall and ceiling. Code-compliant install and finish.

Legal suites and shared walls

Frequent work in Empire Park homes and multi-unit buildings. We build the rated separations these require. See our legal suite drywall page.

Board thickness and why 5/8 is standard here

Not just thicker

Type X is 5/8 inch because the core needs that mass and the glass-fibre reinforcement to hold together as the gypsum calcines under heat.

The common error

Using 1/2 inch board in a rated Empire Park assembly because it is what was on site. It looks identical once finished and it is not the tested assembly. Board arriving on site is checked against the specification rather than assumed.

Rated does not mean soundproof

Two different goals

People often assume a fire-rated Empire Park wall is also a sound wall. It is denser than a standard wall so it helps a little, but rating and acoustic performance are separate specifications.

When both are needed

A suite separation usually needs both, and they are built together. If sound is what you actually care about, we would rather design for that explicitly than let a rating imply it.

What happens when an assembly is altered later

Every future trade is a risk

A rated Empire Park wall or ceiling stays rated only while nobody cuts an unsealed hole in it. Later work — a fan, a light, a duct, a speaker — can quietly undo it.

What we leave you

We photograph the rated work before covering it, so there is a record of what is behind the finish for whoever works on the house next.

How it works

Simple, clean, on schedule — Fire-Rated Drywall in Empire Park Edmonton

Free quote

We come out to your Empire Park Edmonton property, take a real look at the fire-rated drywall, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every fire-rated drywall quote in Empire Park Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the fire-rated drywall in Empire Park Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Empire Park Edmonton home while we finish the fire-rated drywall to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished fire-rated drywall with us and you're happy with the result in Empire Park Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the fire-rated drywall contractor Empire Park Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your fire-rated drywall project in Empire Park Edmonton.

Read our reviews on Google

FAQ — Fire-Rated Drywall Empire Park Edmonton

Fire-Rated Drywall Empire Park Edmonton: your questions answered

How do I know which rated assembly my Empire Park project needs?: It comes from your drawings or from the building official at permit stage, not from us and not from the board supplier. We build to the assembly you have been given, and if what is specified does not match what is on site we will tell you before boarding.
Can you finish the fire-rated board too?: Yes — your Empire Park separation passes code and looks properly finished, ready for paint.
What if someone cuts into it later?: That is the risk — a fan, a light or a duct added later can quietly undo the assembly. We photograph the rated work before covering it so there is a record of what is behind the finish for whoever works on the house next.
Can I use 1/2 inch board if that is what is on site?: Not in a rated assembly. Type X is 5/8 inch because the core needs that mass and reinforcement to hold together under heat. It looks identical once finished and it is not the tested assembly — we check board against the specification.
Is a fire-rated wall also soundproof?: It helps a little because it is denser, but rating and acoustic performance are separate specifications. A suite separation usually needs both, built together. If sound is the real goal we would rather design for it explicitly.
Will it pass inspection in Empire Park?: Yes — we install the correct Type X assembly and seal penetrations to spec so your Empire Park separation passes inspection.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Fire-Rated Drywall Empire Park Edmonton

Type X board in Empire Park for garages, suites and mechanical rooms