Can I put an access hatch in my rated garage ceiling?

Only with a rated detail. Any hatch interrupts the assembly. It is a common find in Leduc garages where storage access was cut in afterwards and never addressed.

Do you stand behind your fire-rated work in Leduc?

Yes. We install to code and walk the Leduc job with you, and if something is not right we come back and make it right.

Can I use 1/2 inch board if that is what is on site?

Not in a rated assembly. Type X is 5/8 inch because the core needs that mass and reinforcement to hold together under heat. It looks identical once finished and it is not the tested assembly — we check board against the specification.

Do you handle the firestopping as well as the board?

We firestop the penetrations that fall within our scope and coordinate the sequence with the other trades so nothing is covered before it is sealed. Where a penetration belongs to another trade, we flag it rather than tape over it.

Can you finish the fire-rated board too?

Yes — your Leduc separation passes code and looks properly finished, ready for paint.

How do I know which rated assembly my Leduc project needs?

It comes from your drawings or from the building official at permit stage, not from us and not from the board supplier. We build to the assembly you have been given, and if what is specified does not match what is on site we will tell you before boarding.

Fire-Rated Drywall Leduc | Type X Board

Rated separations in Leduc that pass inspection the first time

A fire-rated wall is not a board, it is an assembly. In Leduc that means the specified board thickness and type, the specified stud and screw spacing, taped joints, and every penetration firestopped. Miss any one of those and the rating is not there, whatever the board says on the back.

Finished clean and inspection-ready
Party walls between units
Basement legal-suite fire separations
Garage ceilings and garage-to-house separations in Leduc
Joints taped as part of the rated assembly, not just for looks
Garage-to-house firewall separations
Furnace and mechanical room enclosures

Coordinating with the electrician early

Boxes in rated walls

Outlet and switch boxes in a rated Leduc assembly need treatment — spacing rules, pads or listed boxes — and back-to-back boxes are a particular problem.

Why early matters

Rearranging a box after board is up means opening a rated wall. Walking the wall with the electrician before boarding takes ten minutes and avoids that entirely.

Sealing at the top and bottom of a rated wall

The wall has to be continuous

A rated separation that stops at a suspended ceiling, or has a gap at the floor, is not a separation. Fire and smoke go over and under it.

Deck to deck

In an Leduc build the rated wall runs to the structure above and is sealed at both ends. It is the detail most often missed in conversions where a wall was built to the ceiling and no further.

Board thickness and why 5/8 is standard here

Not just thicker

Type X is 5/8 inch because the core needs that mass and the glass-fibre reinforcement to hold together as the gypsum calcines under heat.

The common error

Using 1/2 inch board in a rated Leduc assembly because it is what was on site. It looks identical once finished and it is not the tested assembly. Board arriving on site is checked against the specification rather than assumed.

What happens when an assembly is altered later

Every future trade is a risk

A rated Leduc wall or ceiling stays rated only while nobody cuts an unsealed hole in it. Later work — a fan, a light, a duct, a speaker — can quietly undo it.

What we leave you

We photograph the rated work before covering it, so there is a record of what is behind the finish for whoever works on the house next.

Fire-rated garages, suites and party walls in Leduc

Garage firewalls

The most common fire-rated job in Leduc is the garage-to-house separation — Type X board on the common wall and ceiling. Code-compliant install and finish.

Legal suites and shared walls

Frequent work in Leduc homes and multi-unit buildings. We build the rated separations these require. See our legal suite drywall page.

What affects the cost of fire-rated drywall in Leduc?

Area and assembly

The cost in Leduc depends on the area and the rated assembly required — a single-layer garage ceiling is different from a two-layer party wall. The Leduc rating drives the build-up, and Type X board carries a premium over standard. We price off the spec and a site look.

Passing inspection in Leduc

The common rated jobs here are garages and suites. The rating only holds if the assembly is built and sealed exactly to spec, so we install it to code and seal penetrations properly so your Leduc project passes the first time.

How it works

Simple, clean, on schedule — Fire-Rated Drywall in Leduc

Free quote

We come out to your Leduc property, take a real look at the fire-rated drywall, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every fire-rated drywall quote in Leduc starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the fire-rated drywall in Leduc. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Leduc home while we finish the fire-rated drywall to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished fire-rated drywall with us and you're happy with the result in Leduc. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Leduc Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the fire-rated drywall contractor Leduc trusts for repair, restoration and finishing — rated on Google by Leduc homeowners.

Read the reviews, or leave your own after your fire-rated drywall project in Leduc.

Read our reviews on Google

FAQ — Fire-Rated Drywall Leduc

Fire-Rated Drywall Leduc: your questions answered

Can I put an access hatch in my rated garage ceiling?: Only with a rated detail. Any hatch interrupts the assembly. It is a common find in Leduc garages where storage access was cut in afterwards and never addressed.
Do you stand behind your fire-rated work in Leduc?: Yes. We install to code and walk the Leduc job with you, and if something is not right we come back and make it right.
Can I use 1/2 inch board if that is what is on site?: Not in a rated assembly. Type X is 5/8 inch because the core needs that mass and reinforcement to hold together under heat. It looks identical once finished and it is not the tested assembly — we check board against the specification.
Do you handle the firestopping as well as the board?: We firestop the penetrations that fall within our scope and coordinate the sequence with the other trades so nothing is covered before it is sealed. Where a penetration belongs to another trade, we flag it rather than tape over it.
Can you finish the fire-rated board too?: Yes — your Leduc separation passes code and looks properly finished, ready for paint.
How do I know which rated assembly my Leduc project needs?: It comes from your drawings or from the building official at permit stage, not from us and not from the board supplier. We build to the assembly you have been given, and if what is specified does not match what is on site we will tell you before boarding.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Fire-Rated Drywall Leduc

Rated separations in Leduc that pass inspection the first time