Can you finish over rated board so it looks like the rest of the room?

Yes. The rated joint treatment comes first because it is part of the assembly, then the visible finish is taken to whatever level suits the room. A Hodgson garage ceiling and a living room do not need the same finish level.

Will it pass inspection in Hodgson?

Yes — we install the correct Type X assembly and seal penetrations to spec so your Hodgson separation passes inspection.

My Hodgson garage ceiling has board but the joints are open. Is that a problem?

Usually yes. Untaped joints are one of the most common reasons a garage separation is not complete, because the board looks installed. Often the fix is finishing the joints and sealing penetrations rather than replacing the ceiling.

Do you install fire-rated drywall in Hodgson?

Yes — fire-rated drywall in Hodgson is part of our regular work, and we are usually booked within the week. We also cover Aspen Gardens, Bearspaw, Blue Quill and Whitemud.

Does the rated wall have to go above the ceiling?

Yes. A separation that stops at a suspended ceiling is not a separation — fire and smoke go over it. The wall runs to the structure above and is sealed at both ends. It is the detail most often missed in conversions.

Do you stand behind your fire-rated work in Hodgson?

Yes. We install to code and walk the Hodgson job with you, and if something is not right we come back and make it right.

Fire-Rated Drywall Hodgson Edmonton | Type X Board

Type X board in Hodgson for garages, suites and mechanical rooms

No shortcuts on Hodgson fire-rating — separations, suites and party walls need code Type X rated assemblies to clear inspection and keep people safe. In Hodgson we install fire-rated drywall to code and finish it clean. Hodgson is one of Whitemud's newer communities, where fresh installation and first-year settling work are common, so fire-rated work here is common on garages and suites. We cover Hodgson, Aspen Gardens, Bearspaw, Blue Quill and Whitemud, 7 days a week.

Type X board to the assembly on the drawings
Type X fire-rated board to code in Hodgson
Penetrations firestopped before the finish goes on
Rated assemblies installed and sealed correctly
Basement legal-suite fire separations
Joints taped as part of the rated assembly, not just for looks
Hodgson coverage — we come to you

What happens when an assembly is altered later

Every future trade is a risk

A rated Hodgson wall or ceiling stays rated only while nobody cuts an unsealed hole in it. Later work — a fan, a light, a duct, a speaker — can quietly undo it.

What we leave you

We photograph the rated work before covering it, so there is a record of what is behind the finish for whoever works on the house next.

Hodgson drywall in context

About Hodgson

The Hodgson neighbourhood was named after John Hodgson (1888-1969) who was the city comptroller and financial commissioner for the City of Edmonton for nearly 40 years.

What we see in Hodgson

In Hodgson the drywall work is first-year settling, basement dev for first owners, Level 5 over builder-grade. We confirm what your home actually needs on site, in writing, before anything starts.

Inspection, and what we hand over

Sequencing with your inspection

Rated assemblies in Hodgson are usually inspected before the finish covers them, so we sequence boarding and firestopping to suit your inspection date rather than working ahead and covering something the inspector needs to see.

If something fails

If an assembly does not pass, we want to hear the inspector reason directly. Most failures are specific and fixable — a screw pattern, an untaped joint, an unsealed penetration — and are corrected faster from the actual note than from a second-hand summary.

Penetrations are where ratings are lost

Every hole is a path

Electrical boxes, plumbing, ducting and pot lights all pierce a rated wall or ceiling in Hodgson. Each one is a route for fire and smoke unless it is firestopped to suit the assembly.

Sequencing matters

Firestopping happens before the finish goes on. We coordinate with your other trades so penetrations are made and sealed before we tape, rather than cut into a finished rated ceiling afterwards and leave it open behind the paint.

One-hour and two-hour assemblies

What the number means

A rating is how long a tested assembly resisted fire under laboratory conditions, not a guarantee about your Hodgson house. One hour is the common residential separation; two hour appears between units in some buildings.

Why it changes the build

A two-hour assembly is usually two layers of board with offset joints, which changes material, labour and thickness. It is specified on the drawings and it is not something to substitute down.

Why Hodgson homeowners trust Emplastrum for fire-rated drywall

To code, and finished clean

A rated assembly has to be right for safety and inspection, and finished well for the room — in Hodgson we do both, installing to code and finishing flat.

Fixed price, same-day reply

We install fire-rated drywall across Hodgson and Whitemud, 7 days a week. Fixed pricing on free Hodgson quotes, a clean site and a guarantee on the work. When an Hodgson job is not right, we make it right — on us.

Our Hodgson fire-rated drywall process, step by step

Right board, right build-up

In Hodgson we confirm the required rating, then install the correct Type X board in the right layers — the assembly, not just the board, is what carries the rating.

Seal and finish

Penetrations and edges are where a rated assembly fails, so we firestop and seal them, then tape and finish the board clean. An Hodgson separation the inspector approves and the eye approves too.

How it works

Simple, clean, on schedule — Fire-Rated Drywall in Hodgson Edmonton

Free quote

We come out to your Hodgson Edmonton property, take a real look at the fire-rated drywall, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every fire-rated drywall quote in Hodgson Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the fire-rated drywall in Hodgson Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Hodgson Edmonton home while we finish the fire-rated drywall to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished fire-rated drywall with us and you're happy with the result in Hodgson Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the fire-rated drywall contractor Hodgson Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your fire-rated drywall project in Hodgson Edmonton.

Read our reviews on Google

FAQ — Fire-Rated Drywall Hodgson Edmonton

Fire-Rated Drywall Hodgson Edmonton: your questions answered

Can you finish over rated board so it looks like the rest of the room?: Yes. The rated joint treatment comes first because it is part of the assembly, then the visible finish is taken to whatever level suits the room. A Hodgson garage ceiling and a living room do not need the same finish level.
Will it pass inspection in Hodgson?: Yes — we install the correct Type X assembly and seal penetrations to spec so your Hodgson separation passes inspection.
My Hodgson garage ceiling has board but the joints are open. Is that a problem?: Usually yes. Untaped joints are one of the most common reasons a garage separation is not complete, because the board looks installed. Often the fix is finishing the joints and sealing penetrations rather than replacing the ceiling.
Do you install fire-rated drywall in Hodgson?: Yes — fire-rated drywall in Hodgson is part of our regular work, and we are usually booked within the week. We also cover Aspen Gardens, Bearspaw, Blue Quill and Whitemud.
Does the rated wall have to go above the ceiling?: Yes. A separation that stops at a suspended ceiling is not a separation — fire and smoke go over it. The wall runs to the structure above and is sealed at both ends. It is the detail most often missed in conversions.
Do you stand behind your fire-rated work in Hodgson?: Yes. We install to code and walk the Hodgson job with you, and if something is not right we come back and make it right.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Fire-Rated Drywall Hodgson Edmonton

Type X board in Hodgson for garages, suites and mechanical rooms