Do you stand behind your fire-rated work in Glenridding Heights?

Yes. We install to code and walk the Glenridding Heights job with you, and if something is not right we come back and make it right.

Where is fire-rated drywall required?

The standard Glenridding Heights fire-rating locations: garage-to-house walls, basement suites and party walls between units. We confirm what your Glenridding Heights project needs.

Will it pass inspection in Glenridding Heights?

Yes — we install the correct Type X assembly and seal penetrations to spec so your Glenridding Heights separation passes inspection.

Do you install fire-rated drywall in Glenridding Heights?

Yes — fire-rated drywall in Glenridding Heights is part of our regular work, and we are usually booked within the week. We also cover Allard, Ambleside, Blackburne and Southwest.

Is Type X the same as fireproof?

No. Type X resists fire for a stated period inside a tested assembly, which buys time to get out. Nothing about it makes a wall fireproof, and the rating only holds if the whole assembly — board, spacing, joints and penetrations — is built as specified.

Can you finish over rated board so it looks like the rest of the room?

Yes. The rated joint treatment comes first because it is part of the assembly, then the visible finish is taken to whatever level suits the room. A Glenridding Heights garage ceiling and a living room do not need the same finish level.

Fire-Rated Drywall Glenridding Heights Edmonton | Type X Board

Fire-rated drywall in Glenridding Heights, built as a complete assembly

Where code requires it in Glenridding Heights, fire-rated board is mandatory: garage-to-house separations, suites and party walls take Type X in a rated assembly — for inspection and for safety. In Glenridding Heights we install fire-rated drywall to code and finish it clean. Glenridding Heights is an Southwest community with a mix of older homes and newer builds, so fire-rated work here is common on garages and suites. We cover Glenridding Heights, Allard, Ambleside, Blackburne and Southwest, 7 days a week.

Basement legal-suite fire separations
Party walls and legal-suite separations
Rated assemblies installed and sealed correctly
Garage ceilings and garage-to-house separations in Glenridding Heights
Party walls between units
Garage-to-house firewall separations
Type X fire-rated board to code in Glenridding Heights

Our Glenridding Heights fire-rated drywall process, step by step

Right board, right build-up

In Glenridding Heights we confirm the required rating, then install the correct Type X board in the right layers — the assembly, not just the board, is what carries the rating.

Seal and finish

Penetrations and edges are where a rated assembly fails, so we firestop and seal them, then tape and finish the board clean. An Glenridding Heights separation the inspector approves and the eye approves too.

Joints, screws and the details inspectors actually check

The parts nobody photographs

A rated assembly in Glenridding Heights depends on screw spacing, joints landing on framing, and joints being taped and filled. Loose screw spacing, unsupported butt joints and untaped joints are the usual reasons a rated wall does not pass.

Two-layer assemblies

Where the assembly is two layers, the second layer joints are offset from the first so no joint runs straight through the wall. That offset is part of the rating, not a finishing preference.

Fire-rated garages, suites and party walls in Glenridding Heights

Garage firewalls

The most common fire-rated job in Glenridding Heights is the garage-to-house separation — Type X board on the common wall and ceiling. Code-compliant install and finish.

Legal suites and shared walls

Frequent work in Glenridding Heights homes and multi-unit buildings. We build the rated separations these require. See our legal suite drywall page.

Sealing at the top and bottom of a rated wall

The wall has to be continuous

A rated separation that stops at a suspended ceiling, or has a gap at the floor, is not a separation. Fire and smoke go over and under it.

Deck to deck

In an Glenridding Heights build the rated wall runs to the structure above and is sealed at both ends. It is the detail most often missed in conversions where a wall was built to the ceiling and no further.

Finishing a rated wall in Glenridding Heights without compromising it

Rated first, pretty second

Taping on a rated assembly in Glenridding Heights does two jobs: it completes the fire separation and it produces the surface you will paint. The tape and fill on the rated joints is not optional cosmetic work.

Level of finish

Beyond the rated joint treatment, the visible finish level is your choice — a garage ceiling rarely needs the same finish as a living room. We will tell you where a higher level is worth paying for and where it is not.

One-hour and two-hour assemblies

What the number means

A rating is how long a tested assembly resisted fire under laboratory conditions, not a guarantee about your Glenridding Heights house. One hour is the common residential separation; two hour appears between units in some buildings.

Why it changes the build

A two-hour assembly is usually two layers of board with offset joints, which changes material, labour and thickness. It is specified on the drawings and it is not something to substitute down.

How it works

Simple, clean, on schedule — Fire-Rated Drywall in Glenridding Heights Edmonton

Free quote

We come out to your Glenridding Heights Edmonton property, take a real look at the fire-rated drywall, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every fire-rated drywall quote in Glenridding Heights Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the fire-rated drywall in Glenridding Heights Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Glenridding Heights Edmonton home while we finish the fire-rated drywall to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished fire-rated drywall with us and you're happy with the result in Glenridding Heights Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the fire-rated drywall contractor Glenridding Heights Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your fire-rated drywall project in Glenridding Heights Edmonton.

Read our reviews on Google

FAQ — Fire-Rated Drywall Glenridding Heights Edmonton

Fire-Rated Drywall Glenridding Heights Edmonton: your questions answered

Do you stand behind your fire-rated work in Glenridding Heights?: Yes. We install to code and walk the Glenridding Heights job with you, and if something is not right we come back and make it right.
Where is fire-rated drywall required?: The standard Glenridding Heights fire-rating locations: garage-to-house walls, basement suites and party walls between units. We confirm what your Glenridding Heights project needs.
Will it pass inspection in Glenridding Heights?: Yes — we install the correct Type X assembly and seal penetrations to spec so your Glenridding Heights separation passes inspection.
Do you install fire-rated drywall in Glenridding Heights?: Yes — fire-rated drywall in Glenridding Heights is part of our regular work, and we are usually booked within the week. We also cover Allard, Ambleside, Blackburne and Southwest.
Is Type X the same as fireproof?: No. Type X resists fire for a stated period inside a tested assembly, which buys time to get out. Nothing about it makes a wall fireproof, and the rating only holds if the whole assembly — board, spacing, joints and penetrations — is built as specified.
Can you finish over rated board so it looks like the rest of the room?: Yes. The rated joint treatment comes first because it is part of the assembly, then the visible finish is taken to whatever level suits the room. A Glenridding Heights garage ceiling and a living room do not need the same finish level.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Fire-Rated Drywall Glenridding Heights Edmonton

Fire-rated drywall in Glenridding Heights, built as a complete assembly