Can pot lights go in a rated ceiling?

Only with fixtures and firestopping suited to that assembly. A standard fixture cut into a rated Morinville ceiling breaks the separation. We coordinate the locations with your electrician so the penetrations are handled before we tape.

Will it pass inspection in Morinville?

Yes — we install the correct Type X assembly and seal penetrations to spec so your Morinville separation passes inspection.

Do you handle the firestopping as well as the board?

We firestop the penetrations that fall within our scope and coordinate the sequence with the other trades so nothing is covered before it is sealed. Where a penetration belongs to another trade, we flag it rather than tape over it.

Does the rated wall have to go above the ceiling?

Yes. A separation that stops at a suspended ceiling is not a separation — fire and smoke go over it. The wall runs to the structure above and is sealed at both ends. It is the detail most often missed in conversions.

My Morinville garage ceiling has board but the joints are open. Is that a problem?

Usually yes. Untaped joints are one of the most common reasons a garage separation is not complete, because the board looks installed. Often the fix is finishing the joints and sealing penetrations rather than replacing the ceiling.

Can I put an access hatch in my rated garage ceiling?

Only with a rated detail. Any hatch interrupts the assembly. It is a common find in Morinville garages where storage access was cut in afterwards and never addressed.

Fire-Rated Drywall Morinville | Type X Board

Fire-rated drywall in Morinville, built as a complete assembly

Most fire-rated work we do in Morinville is one of four things: a garage ceiling under living space, a party wall between units, a furnace or mechanical room, or a legal-suite separation. Each has its own assembly, and the drawings or the building official decide which one applies — not us and not the supplier.

Garage-to-house firewall separations
Garage ceilings and garage-to-house separations in Morinville
Finished clean and inspection-ready
Type X fire-rated board to code in Morinville
Furnace and mechanical room enclosures
Morinville coverage — we come to you
Party walls and legal-suite separations

Fire-rated garages, suites and party walls in Morinville

Garage firewalls

The most common fire-rated job in Morinville is the garage-to-house separation — Type X board on the common wall and ceiling. Code-compliant install and finish.

Legal suites and shared walls

Frequent work in Morinville homes and multi-unit buildings. We build the rated separations these require. See our legal suite drywall page.

Finishing a rated wall in Morinville without compromising it

Rated first, pretty second

Taping on a rated assembly in Morinville does two jobs: it completes the fire separation and it produces the surface you will paint. The tape and fill on the rated joints is not optional cosmetic work.

Level of finish

Beyond the rated joint treatment, the visible finish level is your choice — a garage ceiling rarely needs the same finish as a living room. We will tell you where a higher level is worth paying for and where it is not.

Why Morinville homeowners trust Emplastrum for fire-rated drywall

To code, and finished clean

A rated assembly has to be right for safety and inspection, and finished well for the room — in Morinville we do both, installing to code and finishing flat.

Fixed price, same-day reply

We install fire-rated drywall across Morinville and Edmonton, 7 days a week. Fixed pricing on free Morinville quotes, a clean site and a guarantee on the work. When an Morinville job is not right, we make it right — on us.

Where Morinville homes usually need rated board

The four common places

Most rated drywall in Morinville houses is one of: the garage ceiling where living space sits above it, the garage-to-house wall, the furnace or mechanical room, and a legal-suite separation between dwelling units.

Renovations trigger it too

Finishing a basement, adding a suite or converting a garage often brings a separation into play that was not there before. If you are not sure whether your Morinville project triggers one, that is a question for the building official at permit stage, and we will tell you when we think you should ask.

What affects the cost of fire-rated drywall in Morinville?

Area and assembly

The cost in Morinville depends on the area and the rated assembly required — a single-layer garage ceiling is different from a two-layer party wall. The Morinville rating drives the build-up, and Type X board carries a premium over standard. We price off the spec and a site look.

Passing inspection in Morinville

The common rated jobs here are garages and suites. The rating only holds if the assembly is built and sealed exactly to spec, so we install it to code and seal penetrations properly so your Morinville project passes the first time.

Penetrations are where ratings are lost

Every hole is a path

Electrical boxes, plumbing, ducting and pot lights all pierce a rated wall or ceiling in Morinville. Each one is a route for fire and smoke unless it is firestopped to suit the assembly.

Sequencing matters

Firestopping happens before the finish goes on. We coordinate with your other trades so penetrations are made and sealed before we tape, rather than cut into a finished rated ceiling afterwards and leave it open behind the paint.

How it works

Simple, clean, on schedule — Fire-Rated Drywall in Morinville

Free quote

We come out to your Morinville property, take a real look at the fire-rated drywall, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every fire-rated drywall quote in Morinville starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the fire-rated drywall in Morinville. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Morinville home while we finish the fire-rated drywall to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished fire-rated drywall with us and you're happy with the result in Morinville. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Morinville Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the fire-rated drywall contractor Morinville trusts for repair, restoration and finishing — rated on Google by Morinville homeowners.

Read the reviews, or leave your own after your fire-rated drywall project in Morinville.

Read our reviews on Google

FAQ — Fire-Rated Drywall Morinville

Fire-Rated Drywall Morinville: your questions answered

Can pot lights go in a rated ceiling?: Only with fixtures and firestopping suited to that assembly. A standard fixture cut into a rated Morinville ceiling breaks the separation. We coordinate the locations with your electrician so the penetrations are handled before we tape.
Will it pass inspection in Morinville?: Yes — we install the correct Type X assembly and seal penetrations to spec so your Morinville separation passes inspection.
Do you handle the firestopping as well as the board?: We firestop the penetrations that fall within our scope and coordinate the sequence with the other trades so nothing is covered before it is sealed. Where a penetration belongs to another trade, we flag it rather than tape over it.
Does the rated wall have to go above the ceiling?: Yes. A separation that stops at a suspended ceiling is not a separation — fire and smoke go over it. The wall runs to the structure above and is sealed at both ends. It is the detail most often missed in conversions.
My Morinville garage ceiling has board but the joints are open. Is that a problem?: Usually yes. Untaped joints are one of the most common reasons a garage separation is not complete, because the board looks installed. Often the fix is finishing the joints and sealing penetrations rather than replacing the ceiling.
Can I put an access hatch in my rated garage ceiling?: Only with a rated detail. Any hatch interrupts the assembly. It is a common find in Morinville garages where storage access was cut in afterwards and never addressed.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Fire-Rated Drywall Morinville

Fire-rated drywall in Morinville, built as a complete assembly