How do I know which rated assembly my Sweet Grass project needs?

It comes from your drawings or from the building official at permit stage, not from us and not from the board supplier. We build to the assembly you have been given, and if what is specified does not match what is on site we will tell you before boarding.

Can you finish the fire-rated board too?

Yes — your Sweet Grass separation passes code and looks properly finished, ready for paint.

Where is fire-rated drywall required?

The standard Sweet Grass fire-rating locations: garage-to-house walls, basement suites and party walls between units. We confirm what your Sweet Grass project needs.

Will it pass inspection in Sweet Grass?

Yes — we install the correct Type X assembly and seal penetrations to spec so your Sweet Grass separation passes inspection.

Do you handle the firestopping as well as the board?

We firestop the penetrations that fall within our scope and coordinate the sequence with the other trades so nothing is covered before it is sealed. Where a penetration belongs to another trade, we flag it rather than tape over it.

Fire-Rated Drywall Sweet Grass Edmonton | Type X Board

Type X board in Sweet Grass for garages, suites and mechanical rooms

A fire-rated wall is not a board, it is an assembly. In Sweet Grass that means the specified board thickness and type, the specified stud and screw spacing, taped joints, and every penetration firestopped. Miss any one of those and the rating is not there, whatever the board says on the back.

Party walls between units
Joints taped as part of the rated assembly, not just for looks
Type X board to the assembly on the drawings
Party walls and legal-suite separations
Type X fire-rated board to code in Sweet Grass
Rated assemblies installed and sealed correctly
Garage ceilings and garage-to-house separations in Sweet Grass

Sealing at the top and bottom of a rated wall

The wall has to be continuous

A rated separation that stops at a suspended ceiling, or has a gap at the floor, is not a separation. Fire and smoke go over and under it.

Deck to deck

In an Sweet Grass build the rated wall runs to the structure above and is sealed at both ends. It is the detail most often missed in conversions where a wall was built to the ceiling and no further.

Sweet Grass drywall in context

About Sweet Grass

The neighbourhood is named in honour of the Cree Indian Chief Sweet Grass who was one of the early west's first conservationists and instrumental in the protection of the Plains Bison.

What we see in Sweet Grass

In Sweet Grass the drywall work is plaster and lath repair, popcorn and stipple ceiling removal, careful patching into original surfaces. We confirm what your home actually needs on site, in writing, before anything starts.

Rated does not mean soundproof

Two different goals

People often assume a fire-rated Sweet Grass wall is also a sound wall. It is denser than a standard wall so it helps a little, but rating and acoustic performance are separate specifications.

When both are needed

A suite separation usually needs both, and they are built together. If sound is what you actually care about, we would rather design for that explicitly than let a rating imply it.

Why Sweet Grass homeowners trust Emplastrum for fire-rated drywall

To code, and finished clean

A rated assembly has to be right for safety and inspection, and finished well for the room — in Sweet Grass we do both, installing to code and finishing flat.

Fixed price, same-day reply

We install fire-rated drywall across Sweet Grass and Whitemud, 7 days a week. Fixed pricing on free Sweet Grass quotes, a clean site and a guarantee on the work. When an Sweet Grass job is not right, we make it right — on us.

What happens when an assembly is altered later

Every future trade is a risk

A rated Sweet Grass wall or ceiling stays rated only while nobody cuts an unsealed hole in it. Later work — a fan, a light, a duct, a speaker — can quietly undo it.

What we leave you

We photograph the rated work before covering it, so there is a record of what is behind the finish for whoever works on the house next.

Type X and Type C are not interchangeable

Two different boards

Type X is the common 5/8 inch rated board. Type C carries additional additives that resist shrinkage at high heat and is specified where an assembly — often a ceiling — depends on the board staying in place longer.

Substituting downward fails

Where drawings call for Type C, Type X is not an equivalent, and an inspector who spots it will fail the assembly. We order to the specification on your Sweet Grass drawings and tell you if what is on site does not match it.

Fire-rated garages, suites and party walls in Sweet Grass

Garage firewalls

The most common fire-rated job in Sweet Grass is the garage-to-house separation — Type X board on the common wall and ceiling. Code-compliant install and finish.

Legal suites and shared walls

Frequent work in Sweet Grass homes and multi-unit buildings. We build the rated separations these require. See our legal suite drywall page.

How it works

Simple, clean, on schedule — Fire-Rated Drywall in Sweet Grass Edmonton

Free quote

We come out to your Sweet Grass Edmonton property, take a real look at the fire-rated drywall, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every fire-rated drywall quote in Sweet Grass Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the fire-rated drywall in Sweet Grass Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Sweet Grass Edmonton home while we finish the fire-rated drywall to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished fire-rated drywall with us and you're happy with the result in Sweet Grass Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the fire-rated drywall contractor Sweet Grass Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your fire-rated drywall project in Sweet Grass Edmonton.

Read our reviews on Google

FAQ — Fire-Rated Drywall Sweet Grass Edmonton

Fire-Rated Drywall Sweet Grass Edmonton: your questions answered

How do I know which rated assembly my Sweet Grass project needs?: It comes from your drawings or from the building official at permit stage, not from us and not from the board supplier. We build to the assembly you have been given, and if what is specified does not match what is on site we will tell you before boarding.
What if someone cuts into it later?: That is the risk — a fan, a light or a duct added later can quietly undo the assembly. We photograph the rated work before covering it so there is a record of what is behind the finish for whoever works on the house next.
Can you finish the fire-rated board too?: Yes — your Sweet Grass separation passes code and looks properly finished, ready for paint.
Where is fire-rated drywall required?: The standard Sweet Grass fire-rating locations: garage-to-house walls, basement suites and party walls between units. We confirm what your Sweet Grass project needs.
Will it pass inspection in Sweet Grass?: Yes — we install the correct Type X assembly and seal penetrations to spec so your Sweet Grass separation passes inspection.
Do you handle the firestopping as well as the board?: We firestop the penetrations that fall within our scope and coordinate the sequence with the other trades so nothing is covered before it is sealed. Where a penetration belongs to another trade, we flag it rather than tape over it.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Fire-Rated Drywall Sweet Grass Edmonton

Type X board in Sweet Grass for garages, suites and mechanical rooms