What if someone cuts into it later?

That is the risk — a fan, a light or a duct added later can quietly undo the assembly. We photograph the rated work before covering it so there is a record of what is behind the finish for whoever works on the house next.

Does the rated wall have to go above the ceiling?

Yes. A separation that stops at a suspended ceiling is not a separation — fire and smoke go over it. The wall runs to the structure above and is sealed at both ends. It is the detail most often missed in conversions.

Do you handle the firestopping as well as the board?

We firestop the penetrations that fall within our scope and coordinate the sequence with the other trades so nothing is covered before it is sealed. Where a penetration belongs to another trade, we flag it rather than tape over it.

Will it pass inspection in Kirkness?

Yes — we install the correct Type X assembly and seal penetrations to spec so your Kirkness separation passes inspection.

Do you install fire-rated drywall in Kirkness?

Yes — fire-rated drywall in Kirkness is part of our regular work, and we are usually booked within the week. We also cover Balwin, Bannerman, Belmont and Northeast.

Can you finish over rated board so it looks like the rest of the room?

Yes. The rated joint treatment comes first because it is part of the assembly, then the visible finish is taken to whatever level suits the room. A Kirkness garage ceiling and a living room do not need the same finish level.

Fire-Rated Drywall Kirkness Edmonton | Type X Board

Type X board in Kirkness for garages, suites and mechanical rooms

Where code requires it in Kirkness, fire-rated board is mandatory: garage-to-house separations, suites and party walls take Type X in a rated assembly — for inspection and for safety. In Kirkness we install fire-rated drywall to code and finish it clean. Kirkness is an Northeast community with a mix of older homes and newer builds, so fire-rated work here is common on garages and suites. We cover Kirkness, Balwin, Bannerman, Belmont and Northeast, 7 days a week.

Basement legal-suite fire separations
Garage-to-house firewall separations
Penetrations firestopped before the finish goes on
Joints taped as part of the rated assembly, not just for looks
Party walls between units
Party walls and legal-suite separations
Rated assemblies installed and sealed correctly

Inspection, and what we hand over

Sequencing with your inspection

Rated assemblies in Kirkness are usually inspected before the finish covers them, so we sequence boarding and firestopping to suit your inspection date rather than working ahead and covering something the inspector needs to see.

If something fails

If an assembly does not pass, we want to hear the inspector reason directly. Most failures are specific and fixable — a screw pattern, an untaped joint, an unsealed penetration — and are corrected faster from the actual note than from a second-hand summary.

Kirkness drywall in context

About Kirkness

Located in the Clareview district, this area is named for James Kirkness, a Hudson's Bay Company employee who came here from Scotland in 1866.

What we see in Kirkness

In Kirkness the drywall work is popcorn and stipple ceiling removal, settling+truss-uplift cracks, nail pops, Poly-B repipe patching repipe patching. We confirm what your home actually needs on site, in writing, before anything starts.

Rated does not mean soundproof

Two different goals

People often assume a fire-rated Kirkness wall is also a sound wall. It is denser than a standard wall so it helps a little, but rating and acoustic performance are separate specifications.

When both are needed

A suite separation usually needs both, and they are built together. If sound is what you actually care about, we would rather design for that explicitly than let a rating imply it.

Type X and Type C are not interchangeable

Two different boards

Type X is the common 5/8 inch rated board. Type C carries additional additives that resist shrinkage at high heat and is specified where an assembly — often a ceiling — depends on the board staying in place longer.

Substituting downward fails

Where drawings call for Type C, Type X is not an equivalent, and an inspector who spots it will fail the assembly. We order to the specification on your Kirkness drawings and tell you if what is on site does not match it.

Common fire-rated situations in Kirkness

In Kirkness, kirkness sits in Edmonton's Northeast district. Located in the Clareview district, this area is named for James Kirkness, a Hudson's Bay Company employee who came here from Scotland in 1866. Across roughly 1,450 homes here, the drywall work is popcorn and stipple ceiling removal, settling+truss-uplift cracks, nail pops, Poly-B repipe patching repipe patching. We cover Kirkness and the surrounding Northeast district, 7 days a week. That is the standard on every job here, big or small — on-site quote, fixed price.

Sealing at the top and bottom of a rated wall

The wall has to be continuous

A rated separation that stops at a suspended ceiling, or has a gap at the floor, is not a separation. Fire and smoke go over and under it.

Deck to deck

In an Kirkness build the rated wall runs to the structure above and is sealed at both ends. It is the detail most often missed in conversions where a wall was built to the ceiling and no further.

Finishing a rated wall in Kirkness without compromising it

Rated first, pretty second

Taping on a rated assembly in Kirkness does two jobs: it completes the fire separation and it produces the surface you will paint. The tape and fill on the rated joints is not optional cosmetic work.

Level of finish

Beyond the rated joint treatment, the visible finish level is your choice — a garage ceiling rarely needs the same finish as a living room. We will tell you where a higher level is worth paying for and where it is not.

How it works

Simple, clean, on schedule — Fire-Rated Drywall in Kirkness Edmonton

Free quote

We come out to your Kirkness Edmonton property, take a real look at the fire-rated drywall, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every fire-rated drywall quote in Kirkness Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the fire-rated drywall in Kirkness Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Kirkness Edmonton home while we finish the fire-rated drywall to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished fire-rated drywall with us and you're happy with the result in Kirkness Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the fire-rated drywall contractor Kirkness Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your fire-rated drywall project in Kirkness Edmonton.

Read our reviews on Google

FAQ — Fire-Rated Drywall Kirkness Edmonton

Fire-Rated Drywall Kirkness Edmonton: your questions answered

What if someone cuts into it later?: That is the risk — a fan, a light or a duct added later can quietly undo the assembly. We photograph the rated work before covering it so there is a record of what is behind the finish for whoever works on the house next.
Does the rated wall have to go above the ceiling?: Yes. A separation that stops at a suspended ceiling is not a separation — fire and smoke go over it. The wall runs to the structure above and is sealed at both ends. It is the detail most often missed in conversions.
Do you handle the firestopping as well as the board?: We firestop the penetrations that fall within our scope and coordinate the sequence with the other trades so nothing is covered before it is sealed. Where a penetration belongs to another trade, we flag it rather than tape over it.
Will it pass inspection in Kirkness?: Yes — we install the correct Type X assembly and seal penetrations to spec so your Kirkness separation passes inspection.
Do you install fire-rated drywall in Kirkness?: Yes — fire-rated drywall in Kirkness is part of our regular work, and we are usually booked within the week. We also cover Balwin, Bannerman, Belmont and Northeast.
Can you finish over rated board so it looks like the rest of the room?: Yes. The rated joint treatment comes first because it is part of the assembly, then the visible finish is taken to whatever level suits the room. A Kirkness garage ceiling and a living room do not need the same finish level.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Fire-Rated Drywall Kirkness Edmonton

Type X board in Kirkness for garages, suites and mechanical rooms