Fire-Rated Drywall Steinhauer Edmonton

Fire-Rated Drywall Steinhauer Edmonton

Type X Board Steinhauer
Fire-Rated Drywall Edmonton

Rated assembly drywall in Steinhauer, Edmonton — the right board, the right screw spacing and the right joint treatment, because a rated wall only performs as a complete system.

Get My Free Quote Call (403) 829-8702

Emplastrum Drywall 5-Star Google Reviews
Free on-site quotes7 days a weekEdmonton · St. Albert · Sherwood Park · Spruce GroveLocally owned & operatedThe Go-To Drywall Contractor for Repair, Restoration & Finishing
Rated separations in Steinhauer that pass inspection the first time

Rated separations in Steinhauer that pass inspection the first time

Where code requires it in Steinhauer, fire-rated board is mandatory: garage-to-house separations, suites and party walls take Type X in a rated assembly — for inspection and for safety. In Steinhauer we install fire-rated drywall to code and finish it clean. Steinhauer is an Whitemud community with a mix of older homes and newer builds, so fire-rated work here is common on garages and suites. We cover Steinhauer, Aspen Gardens, Bearspaw, Blue Quill and Whitemud, 7 days a week.

Watch

Fire-Rated Drywall Steinhauer Edmonton

Watch fire-rated drywall jobs in Steinhauer Edmonton on our YouTube channel

Penetrations are where ratings are lost

Every hole is a path

Electrical boxes, plumbing, ducting and pot lights all pierce a rated wall or ceiling in Steinhauer. Each one is a route for fire and smoke unless it is firestopped to suit the assembly.

Sequencing matters

Firestopping happens before the finish goes on. We coordinate with your other trades so penetrations are made and sealed before we tape, rather than cut into a finished rated ceiling afterwards and leave it open behind the paint.

Steinhauer drywall in context

About Steinhauer

The neighbourhood is named for Henry Bird Steinhauer, a missionary who settled in Alberta during the mid-1800s (and from whom the family of the former Lieutenant Governor takes its name).

What we see in Steinhauer

In Steinhauer the drywall work is plaster and lath repair, popcorn and stipple ceiling removal, careful patching into original surfaces. We confirm what your home actually needs on site, in writing, before anything starts.

Our Steinhauer fire-rated drywall process, step by step

Right board, right build-up

In Steinhauer we confirm the required rating, then install the correct Type X board in the right layers — the assembly, not just the board, is what carries the rating.

Seal and finish

Penetrations and edges are where a rated assembly fails, so we firestop and seal them, then tape and finish the board clean. An Steinhauer separation the inspector approves and the eye approves too.

Fire-rated garages, suites and party walls in Steinhauer

Garage firewalls

The most common fire-rated job in Steinhauer is the garage-to-house separation — Type X board on the common wall and ceiling. Code-compliant install and finish.

Legal suites and shared walls

Frequent work in Steinhauer homes and multi-unit buildings. We build the rated separations these require. See our legal suite drywall page.

Coordinating with the electrician early

Boxes in rated walls

Outlet and switch boxes in a rated Steinhauer assembly need treatment — spacing rules, pads or listed boxes — and back-to-back boxes are a particular problem.

Why early matters

Rearranging a box after board is up means opening a rated wall. Walking the wall with the electrician before boarding takes ten minutes and avoids that entirely.

Joints, screws and the details inspectors actually check

The parts nobody photographs

A rated assembly in Steinhauer depends on screw spacing, joints landing on framing, and joints being taped and filled. Loose screw spacing, unsupported butt joints and untaped joints are the usual reasons a rated wall does not pass.

Two-layer assemblies

Where the assembly is two layers, the second layer joints are offset from the first so no joint runs straight through the wall. That offset is part of the rating, not a finishing preference.

Sealing at the top and bottom of a rated wall

The wall has to be continuous

A rated separation that stops at a suspended ceiling, or has a gap at the floor, is not a separation. Fire and smoke go over and under it.

Deck to deck

In an Steinhauer build the rated wall runs to the structure above and is sealed at both ends. It is the detail most often missed in conversions where a wall was built to the ceiling and no further.
How it works

Simple, clean, on schedule — Fire-Rated Drywall in Steinhauer Edmonton

1

Free quote

We come out to your Steinhauer Edmonton property, take a real look at the fire-rated drywall, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every fire-rated drywall quote in Steinhauer Edmonton starts with an honest, on-site assessment.

2

Book a day

We pick a day that works for your schedule and show up on time, ready to start the fire-rated drywall in Steinhauer Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

3

The work

We keep the dust under control and protect your Steinhauer Edmonton home while we finish the fire-rated drywall to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

4

Walk it with you

We don't pack up till you've walked the finished fire-rated drywall with us and you're happy with the result in Steinhauer Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the fire-rated drywall contractor Steinhauer Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your fire-rated drywall project in Steinhauer Edmonton.

Read our reviews on Google
FAQ — Fire-Rated Drywall Steinhauer Edmonton

Fire-Rated Drywall Steinhauer Edmonton: your questions answered

Will it pass inspection in Steinhauer?
Yes — we install the correct Type X assembly and seal penetrations to spec so your Steinhauer separation passes inspection.
Is Type X the same as fireproof?
No. Type X resists fire for a stated period inside a tested assembly, which buys time to get out. Nothing about it makes a wall fireproof, and the rating only holds if the whole assembly — board, spacing, joints and penetrations — is built as specified.
How do I know which rated assembly my Steinhauer project needs?
It comes from your drawings or from the building official at permit stage, not from us and not from the board supplier. We build to the assembly you have been given, and if what is specified does not match what is on site we will tell you before boarding.
Can you finish the fire-rated board too?
Yes — your Steinhauer separation passes code and looks properly finished, ready for paint.
My Steinhauer garage ceiling has board but the joints are open. Is that a problem?
Usually yes. Untaped joints are one of the most common reasons a garage separation is not complete, because the board looks installed. Often the fix is finishing the joints and sealing penetrations rather than replacing the ceiling.
Do you install fire-rated drywall in Steinhauer?
Yes — fire-rated drywall in Steinhauer is part of our regular work, and we are usually booked within the week. We also cover Aspen Gardens, Bearspaw, Blue Quill and Whitemud.

Need Edmonton’s go-to drywall contractor for repair, restoration and finishing? One trusted team for boarding, taping, finishing, repairs & renovations — start to finish.

Your Drywall Contractor in Edmonton →
Get Your Free Drywall Quote
Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.
No obligation. We never share your information.
📞  Call (403) 829-8702 Free Quote
See our latest drywall projects & updates on FacebookFollow Emplastrum Drywall — Edmonton, St. Albert, Sherwood Park, Spruce Grove & Stony Plain Follow on Facebook