Can you finish the fire-rated board too?

Yes — your West Jasper Place separation passes code and looks properly finished, ready for paint.

Do you install fire-rated drywall in West Jasper Place?

Yes — fire-rated drywall in West Jasper Place is part of our regular work, and we are usually booked within the week. We also cover Britannia Youngstown, Canora, Crestwood and Jasper Place.

Can you finish over rated board so it looks like the rest of the room?

Yes. The rated joint treatment comes first because it is part of the assembly, then the visible finish is taken to whatever level suits the room. A West Jasper Place garage ceiling and a living room do not need the same finish level.

Can I put an access hatch in my rated garage ceiling?

Only with a rated detail. Any hatch interrupts the assembly. It is a common find in West Jasper Place garages where storage access was cut in afterwards and never addressed.

How do I know which rated assembly my West Jasper Place project needs?

It comes from your drawings or from the building official at permit stage, not from us and not from the board supplier. We build to the assembly you have been given, and if what is specified does not match what is on site we will tell you before boarding.

Where is fire-rated drywall required?

The standard West Jasper Place fire-rating locations: garage-to-house walls, basement suites and party walls between units. We confirm what your West Jasper Place project needs.

Fire-Rated Drywall West Jasper Place Edmonton | Type X Board

Type X board in West Jasper Place for garages, suites and mechanical rooms

Where code requires it in West Jasper Place, fire-rated board is mandatory: garage-to-house separations, suites and party walls take Type X in a rated assembly — for inspection and for safety. In West Jasper Place we install fire-rated drywall to code and finish it clean. West Jasper Place is an Jasper Place community with a mix of older homes and newer builds, so fire-rated work here is common on garages and suites. We cover West Jasper Place, Britannia Youngstown, Canora, Crestwood and Jasper Place, 7 days a week.

Basement legal-suite fire separations
Finished clean and inspection-ready
Type X board to the assembly on the drawings
West Jasper Place coverage — we come to you
Joints taped as part of the rated assembly, not just for looks
Party walls and legal-suite separations
Rated assemblies installed and sealed correctly

Type X and Type C are not interchangeable

Two different boards

Type X is the common 5/8 inch rated board. Type C carries additional additives that resist shrinkage at high heat and is specified where an assembly — often a ceiling — depends on the board staying in place longer.

Substituting downward fails

Where drawings call for Type C, Type X is not an equivalent, and an inspector who spots it will fail the assembly. We order to the specification on your West Jasper Place drawings and tell you if what is on site does not match it.

West Jasper Place drywall in context

About West Jasper Place

During the 1930s, residents settled in the town of Jasper to escape the higher taxes of Edmonton.

What we see in West Jasper Place

In West Jasper Place the drywall work is plaster and lath repair, popcorn and stipple ceiling removal, careful patching into original surfaces. We confirm what your home actually needs on site, in writing, before anything starts.

Fire-rated garages, suites and party walls in West Jasper Place

Garage firewalls

The most common fire-rated job in West Jasper Place is the garage-to-house separation — Type X board on the common wall and ceiling. Code-compliant install and finish.

Legal suites and shared walls

Frequent work in West Jasper Place homes and multi-unit buildings. We build the rated separations these require. See our legal suite drywall page.

Where West Jasper Place homes usually need rated board

The four common places

Most rated drywall in West Jasper Place houses is one of: the garage ceiling where living space sits above it, the garage-to-house wall, the furnace or mechanical room, and a legal-suite separation between dwelling units.

Renovations trigger it too

Finishing a basement, adding a suite or converting a garage often brings a separation into play that was not there before. If you are not sure whether your West Jasper Place project triggers one, that is a question for the building official at permit stage, and we will tell you when we think you should ask.

Sealing at the top and bottom of a rated wall

The wall has to be continuous

A rated separation that stops at a suspended ceiling, or has a gap at the floor, is not a separation. Fire and smoke go over and under it.

Deck to deck

In an West Jasper Place build the rated wall runs to the structure above and is sealed at both ends. It is the detail most often missed in conversions where a wall was built to the ceiling and no further.

One-hour and two-hour assemblies

What the number means

A rating is how long a tested assembly resisted fire under laboratory conditions, not a guarantee about your West Jasper Place house. One hour is the common residential separation; two hour appears between units in some buildings.

Why it changes the build

A two-hour assembly is usually two layers of board with offset joints, which changes material, labour and thickness. It is specified on the drawings and it is not something to substitute down.

Inspection, and what we hand over

Sequencing with your inspection

Rated assemblies in West Jasper Place are usually inspected before the finish covers them, so we sequence boarding and firestopping to suit your inspection date rather than working ahead and covering something the inspector needs to see.

If something fails

If an assembly does not pass, we want to hear the inspector reason directly. Most failures are specific and fixable — a screw pattern, an untaped joint, an unsealed penetration — and are corrected faster from the actual note than from a second-hand summary.

How it works

Simple, clean, on schedule — Fire-Rated Drywall in West Jasper Place Edmonton

Free quote

We come out to your West Jasper Place Edmonton property, take a real look at the fire-rated drywall, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every fire-rated drywall quote in West Jasper Place Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the fire-rated drywall in West Jasper Place Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your West Jasper Place Edmonton home while we finish the fire-rated drywall to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished fire-rated drywall with us and you're happy with the result in West Jasper Place Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the fire-rated drywall contractor West Jasper Place Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your fire-rated drywall project in West Jasper Place Edmonton.

Read our reviews on Google

FAQ — Fire-Rated Drywall West Jasper Place Edmonton

Fire-Rated Drywall West Jasper Place Edmonton: your questions answered

Can you finish the fire-rated board too?: Yes — your West Jasper Place separation passes code and looks properly finished, ready for paint.
Do you install fire-rated drywall in West Jasper Place?: Yes — fire-rated drywall in West Jasper Place is part of our regular work, and we are usually booked within the week. We also cover Britannia Youngstown, Canora, Crestwood and Jasper Place.
Can you finish over rated board so it looks like the rest of the room?: Yes. The rated joint treatment comes first because it is part of the assembly, then the visible finish is taken to whatever level suits the room. A West Jasper Place garage ceiling and a living room do not need the same finish level.
Can I put an access hatch in my rated garage ceiling?: Only with a rated detail. Any hatch interrupts the assembly. It is a common find in West Jasper Place garages where storage access was cut in afterwards and never addressed.
How do I know which rated assembly my West Jasper Place project needs?: It comes from your drawings or from the building official at permit stage, not from us and not from the board supplier. We build to the assembly you have been given, and if what is specified does not match what is on site we will tell you before boarding.
Where is fire-rated drywall required?: The standard West Jasper Place fire-rating locations: garage-to-house walls, basement suites and party walls between units. We confirm what your West Jasper Place project needs.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Fire-Rated Drywall West Jasper Place Edmonton

Type X board in West Jasper Place for garages, suites and mechanical rooms