Can I use 1/2 inch board if that is what is on site?

Not in a rated assembly. Type X is 5/8 inch because the core needs that mass and reinforcement to hold together under heat. It looks identical once finished and it is not the tested assembly — we check board against the specification.

Where is fire-rated drywall required?

The standard Pollard Meadows fire-rating locations: garage-to-house walls, basement suites and party walls between units. We confirm what your Pollard Meadows project needs.

What if someone cuts into it later?

That is the risk — a fan, a light or a duct added later can quietly undo the assembly. We photograph the rated work before covering it so there is a record of what is behind the finish for whoever works on the house next.

Do you install fire-rated drywall in Pollard Meadows?

Yes — fire-rated drywall in Pollard Meadows is part of our regular work, and we are usually booked within the week. We also cover Bisset, Crawford Plains, Daly Grove and Mill Woods and Meadows.

How do I know which rated assembly my Pollard Meadows project needs?

It comes from your drawings or from the building official at permit stage, not from us and not from the board supplier. We build to the assembly you have been given, and if what is specified does not match what is on site we will tell you before boarding.

Do you handle the firestopping as well as the board?

We firestop the penetrations that fall within our scope and coordinate the sequence with the other trades so nothing is covered before it is sealed. Where a penetration belongs to another trade, we flag it rather than tape over it.

Fire-Rated Drywall Pollard Meadows Edmonton | Type X Board

Type X board in Pollard Meadows for garages, suites and mechanical rooms

No shortcuts on Pollard Meadows fire-rating — separations, suites and party walls need code Type X rated assemblies to clear inspection and keep people safe. In Pollard Meadows we install fire-rated drywall to code and finish it clean. Pollard Meadows is one of Mill Woods and Meadows's newer communities, where fresh installation and first-year settling work are common, so fire-rated work here is common on garages and suites. We cover Pollard Meadows, Bisset, Crawford Plains, Daly Grove and Mill Woods and Meadows, 7 days a week.

Joints taped as part of the rated assembly, not just for looks
Finished clean and inspection-ready
Type X fire-rated board to code in Pollard Meadows
Basement legal-suite fire separations
Furnace and mechanical room enclosures
Penetrations firestopped before the finish goes on
Garage-to-house firewall separations

What makes drywall fire-rated in Pollard Meadows

The board is only part of it

Type X board carries a glass-fibre reinforced core that holds together longer under heat. That is what earns the rating in a lab, but only inside a tested assembly: a stated board thickness, stud spacing, screw pattern and joint treatment.

Why that matters on your job

Putting Type X on a wall does not make the wall rated. In Pollard Meadows we build the assembly the drawings specify, because an inspector is checking the system, not the sticker on the board.

Pollard Meadows drywall in context

About Pollard Meadows

Pollard Meadows is one of the 27 neighbourhoods of Mill Woods.

What we see in Pollard Meadows

In Pollard Meadows the drywall work is popcorn and stipple ceiling removal, settling+truss-uplift cracks, nail pops, Poly-B repipe patching repipe patching. We confirm what your home actually needs on site, in writing, before anything starts.

Why Pollard Meadows homeowners trust Emplastrum for fire-rated drywall

To code, and finished clean

A rated assembly has to be right for safety and inspection, and finished well for the room — in Pollard Meadows we do both, installing to code and finishing flat.

Fixed price, same-day reply

We install fire-rated drywall across Pollard Meadows and Mill Woods and Meadows, 7 days a week. Fixed pricing on free Pollard Meadows quotes, a clean site and a guarantee on the work. When an Pollard Meadows job is not right, we make it right — on us.

Board thickness and why 5/8 is standard here

Not just thicker

Type X is 5/8 inch because the core needs that mass and the glass-fibre reinforcement to hold together as the gypsum calcines under heat.

The common error

Using 1/2 inch board in a rated Pollard Meadows assembly because it is what was on site. It looks identical once finished and it is not the tested assembly. Board arriving on site is checked against the specification rather than assumed.

Finishing a rated wall in Pollard Meadows without compromising it

Rated first, pretty second

Taping on a rated assembly in Pollard Meadows does two jobs: it completes the fire separation and it produces the surface you will paint. The tape and fill on the rated joints is not optional cosmetic work.

Level of finish

Beyond the rated joint treatment, the visible finish level is your choice — a garage ceiling rarely needs the same finish as a living room. We will tell you where a higher level is worth paying for and where it is not.

Our Pollard Meadows fire-rated drywall process, step by step

Right board, right build-up

In Pollard Meadows we confirm the required rating, then install the correct Type X board in the right layers — the assembly, not just the board, is what carries the rating.

Seal and finish

Penetrations and edges are where a rated assembly fails, so we firestop and seal them, then tape and finish the board clean. An Pollard Meadows separation the inspector approves and the eye approves too.

Fire-rated drywall in a Pollard Meadows garage ceiling

The most common one we do

Where Pollard Meadows living space sits over a garage, the ceiling normally needs a rated separation. It is also the assembly most often found incomplete on older homes and DIY conversions — board up, joints untaped, pot lights cut straight through.

What we check before quoting

We look at what is above the ceiling, what is already installed, and whether the existing board is actually rated. Sometimes the honest answer is that the existing ceiling only needs its joints completed and its penetrations sealed rather than replacing.

How it works

Simple, clean, on schedule — Fire-Rated Drywall in Pollard Meadows Edmonton

Free quote

We come out to your Pollard Meadows Edmonton property, take a real look at the fire-rated drywall, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every fire-rated drywall quote in Pollard Meadows Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the fire-rated drywall in Pollard Meadows Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Pollard Meadows Edmonton home while we finish the fire-rated drywall to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished fire-rated drywall with us and you're happy with the result in Pollard Meadows Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the fire-rated drywall contractor Pollard Meadows Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your fire-rated drywall project in Pollard Meadows Edmonton.

Read our reviews on Google

FAQ — Fire-Rated Drywall Pollard Meadows Edmonton

Fire-Rated Drywall Pollard Meadows Edmonton: your questions answered

Can I use 1/2 inch board if that is what is on site?: Not in a rated assembly. Type X is 5/8 inch because the core needs that mass and reinforcement to hold together under heat. It looks identical once finished and it is not the tested assembly — we check board against the specification.
Where is fire-rated drywall required?: The standard Pollard Meadows fire-rating locations: garage-to-house walls, basement suites and party walls between units. We confirm what your Pollard Meadows project needs.
What if someone cuts into it later?: That is the risk — a fan, a light or a duct added later can quietly undo the assembly. We photograph the rated work before covering it so there is a record of what is behind the finish for whoever works on the house next.
Do you install fire-rated drywall in Pollard Meadows?: Yes — fire-rated drywall in Pollard Meadows is part of our regular work, and we are usually booked within the week. We also cover Bisset, Crawford Plains, Daly Grove and Mill Woods and Meadows.
How do I know which rated assembly my Pollard Meadows project needs?: It comes from your drawings or from the building official at permit stage, not from us and not from the board supplier. We build to the assembly you have been given, and if what is specified does not match what is on site we will tell you before boarding.
Do you handle the firestopping as well as the board?: We firestop the penetrations that fall within our scope and coordinate the sequence with the other trades so nothing is covered before it is sealed. Where a penetration belongs to another trade, we flag it rather than tape over it.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Fire-Rated Drywall Pollard Meadows Edmonton

Type X board in Pollard Meadows for garages, suites and mechanical rooms