Free on-site quotes7 days a weekEdmonton · St. Albert · Sherwood Park · Spruce GroveLocally owned & operatedThe Go-To Drywall Contractor for Repair, Restoration & Finishing

Rated separations in Kiniski Gardens that pass inspection the first time

In Kiniski Gardens the code decides: garage separations, basement suites and party walls must carry Type X board in a rated assembly to pass inspection and protect the home. In Kiniski Gardens we install fire-rated drywall to code and finish it clean. Kiniski Gardens is an Mill Woods and Meadows community with a mix of older homes and newer builds, so fire-rated work here is common on garages and suites. We cover Kiniski Gardens, Bisset, Crawford Plains, Daly Grove and Mill Woods and Meadows, 7 days a week.

Fire-Rated Drywall Kiniski Gardens Edmonton

Watch fire-rated drywall jobs in Kiniski Gardens Edmonton on our YouTube channel

Our Kiniski Gardens fire-rated drywall process, step by step

Right board, right build-up

In Kiniski Gardens we confirm the required rating, then install the correct Type X board in the right layers — the assembly, not just the board, is what carries the rating.

Seal and finish

Penetrations and edges are where a rated assembly fails, so we firestop and seal them, then tape and finish the board clean. An Kiniski Gardens separation the inspector approves and the eye approves too.

Kiniski Gardens drywall in context

About Kiniski Gardens

Kiniski Gardens was named in honour of Polish-born Julia Kiniski (1899-1969), a dedicated local politician elected in 1963.

What we see in Kiniski Gardens

In Kiniski Gardens the drywall work is popcorn and stipple ceiling removal, settling+truss-uplift cracks, nail pops, Poly-B repipe patching repipe patching. We confirm what your home actually needs on site, in writing, before anything starts.

Board thickness and why 5/8 is standard here

Not just thicker

Type X is 5/8 inch because the core needs that mass and the glass-fibre reinforcement to hold together as the gypsum calcines under heat.

The common error

Using 1/2 inch board in a rated Kiniski Gardens assembly because it is what was on site. It looks identical once finished and it is not the tested assembly. Board arriving on site is checked against the specification rather than assumed.

Sealing at the top and bottom of a rated wall

The wall has to be continuous

A rated separation that stops at a suspended ceiling, or has a gap at the floor, is not a separation. Fire and smoke go over and under it.

Deck to deck

In an Kiniski Gardens build the rated wall runs to the structure above and is sealed at both ends. It is the detail most often missed in conversions where a wall was built to the ceiling and no further.

Type X and Type C are not interchangeable

Two different boards

Type X is the common 5/8 inch rated board. Type C carries additional additives that resist shrinkage at high heat and is specified where an assembly — often a ceiling — depends on the board staying in place longer.

Substituting downward fails

Where drawings call for Type C, Type X is not an equivalent, and an inspector who spots it will fail the assembly. We order to the specification on your Kiniski Gardens drawings and tell you if what is on site does not match it.

Where Kiniski Gardens homes usually need rated board

The four common places

Most rated drywall in Kiniski Gardens houses is one of: the garage ceiling where living space sits above it, the garage-to-house wall, the furnace or mechanical room, and a legal-suite separation between dwelling units.

Renovations trigger it too

Finishing a basement, adding a suite or converting a garage often brings a separation into play that was not there before. If you are not sure whether your Kiniski Gardens project triggers one, that is a question for the building official at permit stage, and we will tell you when we think you should ask.

Inspection, and what we hand over

Sequencing with your inspection

Rated assemblies in Kiniski Gardens are usually inspected before the finish covers them, so we sequence boarding and firestopping to suit your inspection date rather than working ahead and covering something the inspector needs to see.

If something fails

If an assembly does not pass, we want to hear the inspector reason directly. Most failures are specific and fixable — a screw pattern, an untaped joint, an unsealed penetration — and are corrected faster from the actual note than from a second-hand summary.

Simple, clean, on schedule — Fire-Rated Drywall in Kiniski Gardens Edmonton

1

Free quote

We come out to your Kiniski Gardens Edmonton property, take a real look at the fire-rated drywall, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every fire-rated drywall quote in Kiniski Gardens Edmonton starts with an honest, on-site assessment.

2

Book a day

We pick a day that works for your schedule and show up on time, ready to start the fire-rated drywall in Kiniski Gardens Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

3

The work

We keep the dust under control and protect your Kiniski Gardens Edmonton home while we finish the fire-rated drywall to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

4

Walk it with you

We don't pack up till you've walked the finished fire-rated drywall with us and you're happy with the result in Kiniski Gardens Edmonton. If anything needs a second look, we handle it before we call the job done.

Rated by Edmonton Homeowners

Emplastrum Drywall is the fire-rated drywall contractor Kiniski Gardens Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your fire-rated drywall project in Kiniski Gardens Edmonton.

Read our reviews on Google

Fire-Rated Drywall Kiniski Gardens Edmonton: your questions answered

Do you stand behind your fire-rated work in Kiniski Gardens?
Yes. We install to code and walk the Kiniski Gardens job with you, and if something is not right we come back and make it right.
Can you finish the fire-rated board too?
Yes — your Kiniski Gardens separation passes code and looks properly finished, ready for paint.
What if someone cuts into it later?
That is the risk — a fan, a light or a duct added later can quietly undo the assembly. We photograph the rated work before covering it so there is a record of what is behind the finish for whoever works on the house next.
My Kiniski Gardens garage ceiling has board but the joints are open. Is that a problem?
Usually yes. Untaped joints are one of the most common reasons a garage separation is not complete, because the board looks installed. Often the fix is finishing the joints and sealing penetrations rather than replacing the ceiling.
Do you install fire-rated drywall in Kiniski Gardens?
Yes — fire-rated drywall in Kiniski Gardens is part of our regular work, and we are usually booked within the week. We also cover Bisset, Crawford Plains, Daly Grove and Mill Woods and Meadows.
Is a fire-rated wall also soundproof?
It helps a little because it is denser, but rating and acoustic performance are separate specifications. A suite separation usually needs both, built together. If sound is the real goal we would rather design for it explicitly.

Need Edmonton’s go-to drywall contractor for repair, restoration and finishing? One trusted team for boarding, taping, finishing, repairs & renovations — start to finish.

Your Drywall Contractor in Edmonton →
Get Your Free Drywall Quote
Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.
No obligation. We never share your information.
📞  Call (403) 829-8702 Free Quote
See our latest drywall projects & updates on FacebookFollow Emplastrum Drywall — Edmonton, St. Albert, Sherwood Park, Spruce Grove & Stony Plain Follow on Facebook