Do you install fire-rated drywall in McCauley?

Yes — fire-rated drywall in McCauley is part of our regular work, and we are usually booked within the week. We also cover Boyle Street, Central McDougall, Dovercourt and Central.

Can you finish the fire-rated board too?

Yes — your McCauley separation passes code and looks properly finished, ready for paint.

Can pot lights go in a rated ceiling?

Only with fixtures and firestopping suited to that assembly. A standard fixture cut into a rated McCauley ceiling breaks the separation. We coordinate the locations with your electrician so the penetrations are handled before we tape.

Is a fire-rated wall also soundproof?

It helps a little because it is denser, but rating and acoustic performance are separate specifications. A suite separation usually needs both, built together. If sound is the real goal we would rather design for it explicitly.

Where is fire-rated drywall required?

The standard McCauley fire-rating locations: garage-to-house walls, basement suites and party walls between units. We confirm what your McCauley project needs.

Do you handle the firestopping as well as the board?

We firestop the penetrations that fall within our scope and coordinate the sequence with the other trades so nothing is covered before it is sealed. Where a penetration belongs to another trade, we flag it rather than tape over it.

Fire-Rated Drywall McCauley Edmonton | Type X Board

Type X board in McCauley for garages, suites and mechanical rooms

A fire-rated wall is not a board, it is an assembly. In McCauley that means the specified board thickness and type, the specified stud and screw spacing, taped joints, and every penetration firestopped. Miss any one of those and the rating is not there, whatever the board says on the back.

Furnace and mechanical room enclosures
Party walls and legal-suite separations
Party walls between units
Finished clean and inspection-ready
McCauley coverage — we come to you
Joints taped as part of the rated assembly, not just for looks
Garage-to-house firewall separations

Board thickness and why 5/8 is standard here

Not just thicker

Type X is 5/8 inch because the core needs that mass and the glass-fibre reinforcement to hold together as the gypsum calcines under heat.

The common error

Using 1/2 inch board in a rated McCauley assembly because it is what was on site. It looks identical once finished and it is not the tested assembly. Board arriving on site is checked against the specification rather than assumed.

McCauley drywall in context

About McCauley

McCauley, named in honour of Edmonton's first mayor (the colourful Matthew McCauley) developed primarily after 1908 when a street car line was started.

What we see in McCauley

In McCauley the drywall work is plaster and lath repair, popcorn and stipple ceiling removal, careful patching into original surfaces. We confirm what your home actually needs on site, in writing, before anything starts.

Coordinating with the electrician early

Boxes in rated walls

Outlet and switch boxes in a rated McCauley assembly need treatment — spacing rules, pads or listed boxes — and back-to-back boxes are a particular problem.

Why early matters

Rearranging a box after board is up means opening a rated wall. Walking the wall with the electrician before boarding takes ten minutes and avoids that entirely.

Type X and Type C are not interchangeable

Two different boards

Type X is the common 5/8 inch rated board. Type C carries additional additives that resist shrinkage at high heat and is specified where an assembly — often a ceiling — depends on the board staying in place longer.

Substituting downward fails

Where drawings call for Type C, Type X is not an equivalent, and an inspector who spots it will fail the assembly. We order to the specification on your McCauley drawings and tell you if what is on site does not match it.

Why McCauley homeowners trust Emplastrum for fire-rated drywall

To code, and finished clean

A rated assembly has to be right for safety and inspection, and finished well for the room — in McCauley we do both, installing to code and finishing flat.

Fixed price, same-day reply

We install fire-rated drywall across McCauley and Central, 7 days a week. Fixed pricing on free McCauley quotes, a clean site and a guarantee on the work. When an McCauley job is not right, we make it right — on us.

Rated does not mean soundproof

Two different goals

People often assume a fire-rated McCauley wall is also a sound wall. It is denser than a standard wall so it helps a little, but rating and acoustic performance are separate specifications.

When both are needed

A suite separation usually needs both, and they are built together. If sound is what you actually care about, we would rather design for that explicitly than let a rating imply it.

Fire-rated drywall in a McCauley garage ceiling

The most common one we do

Where McCauley living space sits over a garage, the ceiling normally needs a rated separation. It is also the assembly most often found incomplete on older homes and DIY conversions — board up, joints untaped, pot lights cut straight through.

What we check before quoting

We look at what is above the ceiling, what is already installed, and whether the existing board is actually rated. Sometimes the honest answer is that the existing ceiling only needs its joints completed and its penetrations sealed rather than replacing.

How it works

Simple, clean, on schedule — Fire-Rated Drywall in Mccauley Edmonton

Free quote

We come out to your Mccauley Edmonton property, take a real look at the fire-rated drywall, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every fire-rated drywall quote in Mccauley Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the fire-rated drywall in Mccauley Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Mccauley Edmonton home while we finish the fire-rated drywall to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished fire-rated drywall with us and you're happy with the result in Mccauley Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the fire-rated drywall contractor Mccauley Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your fire-rated drywall project in Mccauley Edmonton.

Read our reviews on Google

FAQ — Fire-Rated Drywall McCauley Edmonton

Fire-Rated Drywall McCauley Edmonton: your questions answered

Do you install fire-rated drywall in McCauley?: Yes — fire-rated drywall in McCauley is part of our regular work, and we are usually booked within the week. We also cover Boyle Street, Central McDougall, Dovercourt and Central.
Can you finish the fire-rated board too?: Yes — your McCauley separation passes code and looks properly finished, ready for paint.
Can pot lights go in a rated ceiling?: Only with fixtures and firestopping suited to that assembly. A standard fixture cut into a rated McCauley ceiling breaks the separation. We coordinate the locations with your electrician so the penetrations are handled before we tape.
Is a fire-rated wall also soundproof?: It helps a little because it is denser, but rating and acoustic performance are separate specifications. A suite separation usually needs both, built together. If sound is the real goal we would rather design for it explicitly.
Where is fire-rated drywall required?: The standard McCauley fire-rating locations: garage-to-house walls, basement suites and party walls between units. We confirm what your McCauley project needs.
Do you handle the firestopping as well as the board?: We firestop the penetrations that fall within our scope and coordinate the sequence with the other trades so nothing is covered before it is sealed. Where a penetration belongs to another trade, we flag it rather than tape over it.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Fire-Rated Drywall McCauley Edmonton

Type X board in McCauley for garages, suites and mechanical rooms