Free on-site quotes7 days a weekEdmonton · St. Albert · Sherwood Park · Spruce GroveLocally owned & operatedThe Go-To Drywall Contractor for Repair, Restoration & Finishing

Rated separations in Jamieson Place that pass inspection the first time

No shortcuts on Jamieson Place fire-rating — separations, suites and party walls need code Type X rated assemblies to clear inspection and keep people safe. In Jamieson Place we install fire-rated drywall to code and finish it clean. Jamieson Place is one of West Edmonton's newer communities, where fresh installation and first-year settling work are common, so fire-rated work here is common on garages and suites. We cover Jamieson Place, Aldergrove, Belmead, Callingwood North and West Edmonton, 7 days a week.

Fire-Rated Drywall Jamieson Place Edmonton

Watch fire-rated drywall jobs in Jamieson Place Edmonton on our YouTube channel

What affects the cost of fire-rated drywall in Jamieson Place?

Area and assembly

The cost in Jamieson Place depends on the area and the rated assembly required — a single-layer garage ceiling is different from a two-layer party wall. The Jamieson Place rating drives the build-up, and Type X board carries a premium over standard. We price off the spec and a site look.

Passing inspection in Jamieson Place

The common rated jobs here are garages and suites. The rating only holds if the assembly is built and sealed exactly to spec, so we install it to code and seal penetrations properly so your Jamieson Place project passes the first time.

Jamieson Place drywall in context

About Jamieson Place

Annexed in 1972 as part of West Jasper Place, this area is named for Colonel F.C.

What we see in Jamieson Place

In Jamieson Place the drywall work is popcorn and stipple ceiling removal, settling+truss-uplift cracks, nail pops, Poly-B repipe patching repipe patching. We confirm what your home actually needs on site, in writing, before anything starts.

One-hour and two-hour assemblies

What the number means

A rating is how long a tested assembly resisted fire under laboratory conditions, not a guarantee about your Jamieson Place house. One hour is the common residential separation; two hour appears between units in some buildings.

Why it changes the build

A two-hour assembly is usually two layers of board with offset joints, which changes material, labour and thickness. It is specified on the drawings and it is not something to substitute down.

Where Jamieson Place homes usually need rated board

The four common places

Most rated drywall in Jamieson Place houses is one of: the garage ceiling where living space sits above it, the garage-to-house wall, the furnace or mechanical room, and a legal-suite separation between dwelling units.

Renovations trigger it too

Finishing a basement, adding a suite or converting a garage often brings a separation into play that was not there before. If you are not sure whether your Jamieson Place project triggers one, that is a question for the building official at permit stage, and we will tell you when we think you should ask.

Sealing at the top and bottom of a rated wall

The wall has to be continuous

A rated separation that stops at a suspended ceiling, or has a gap at the floor, is not a separation. Fire and smoke go over and under it.

Deck to deck

In an Jamieson Place build the rated wall runs to the structure above and is sealed at both ends. It is the detail most often missed in conversions where a wall was built to the ceiling and no further.

Rated ceilings and the membrane above

Protecting the structure

A rated ceiling under living space is protecting the floor structure above it, which is why the board and its fastening are specified rather than optional.

Access hatches

Any hatch through it interrupts the assembly and needs a rated detail. It is a common find in Jamieson Place garages where storage access was cut in afterwards and never addressed.

What happens when an assembly is altered later

Every future trade is a risk

A rated Jamieson Place wall or ceiling stays rated only while nobody cuts an unsealed hole in it. Later work — a fan, a light, a duct, a speaker — can quietly undo it.

What we leave you

We photograph the rated work before covering it, so there is a record of what is behind the finish for whoever works on the house next.

Simple, clean, on schedule — Fire-Rated Drywall in Jamieson Place Edmonton

1

Free quote

We come out to your Jamieson Place Edmonton property, take a real look at the fire-rated drywall, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every fire-rated drywall quote in Jamieson Place Edmonton starts with an honest, on-site assessment.

2

Book a day

We pick a day that works for your schedule and show up on time, ready to start the fire-rated drywall in Jamieson Place Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

3

The work

We keep the dust under control and protect your Jamieson Place Edmonton home while we finish the fire-rated drywall to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

4

Walk it with you

We don't pack up till you've walked the finished fire-rated drywall with us and you're happy with the result in Jamieson Place Edmonton. If anything needs a second look, we handle it before we call the job done.

Rated by Edmonton Homeowners

Emplastrum Drywall is the fire-rated drywall contractor Jamieson Place Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your fire-rated drywall project in Jamieson Place Edmonton.

Read our reviews on Google

Fire-Rated Drywall Jamieson Place Edmonton: your questions answered

Do you install fire-rated drywall in Jamieson Place?
Yes — fire-rated drywall in Jamieson Place is part of our regular work, and we are usually booked within the week. We also cover Aldergrove, Belmead, Callingwood North and West Edmonton.
Is Type X the same as fireproof?
No. Type X resists fire for a stated period inside a tested assembly, which buys time to get out. Nothing about it makes a wall fireproof, and the rating only holds if the whole assembly — board, spacing, joints and penetrations — is built as specified.
Where is fire-rated drywall required?
The standard Jamieson Place fire-rating locations: garage-to-house walls, basement suites and party walls between units. We confirm what your Jamieson Place project needs.
Can pot lights go in a rated ceiling?
Only with fixtures and firestopping suited to that assembly. A standard fixture cut into a rated Jamieson Place ceiling breaks the separation. We coordinate the locations with your electrician so the penetrations are handled before we tape.
Can you finish over rated board so it looks like the rest of the room?
Yes. The rated joint treatment comes first because it is part of the assembly, then the visible finish is taken to whatever level suits the room. A Jamieson Place garage ceiling and a living room do not need the same finish level.
Is a fire-rated wall also soundproof?
It helps a little because it is denser, but rating and acoustic performance are separate specifications. A suite separation usually needs both, built together. If sound is the real goal we would rather design for it explicitly.

Need Edmonton’s go-to drywall contractor for repair, restoration and finishing? One trusted team for boarding, taping, finishing, repairs & renovations — start to finish.

Your Drywall Contractor in Edmonton →
Get Your Free Drywall Quote
Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.
No obligation. We never share your information.
📞  Call (403) 829-8702 Free Quote
See our latest drywall projects & updates on FacebookFollow Emplastrum Drywall — Edmonton, St. Albert, Sherwood Park, Spruce Grove & Stony Plain Follow on Facebook