Do you handle the firestopping as well as the board?

We firestop the penetrations that fall within our scope and coordinate the sequence with the other trades so nothing is covered before it is sealed. Where a penetration belongs to another trade, we flag it rather than tape over it.

My Windermere garage ceiling has board but the joints are open. Is that a problem?

Usually yes. Untaped joints are one of the most common reasons a garage separation is not complete, because the board looks installed. Often the fix is finishing the joints and sealing penetrations rather than replacing the ceiling.

Can pot lights go in a rated ceiling?

Only with fixtures and firestopping suited to that assembly. A standard fixture cut into a rated Windermere ceiling breaks the separation. We coordinate the locations with your electrician so the penetrations are handled before we tape.

Can you finish the fire-rated board too?

Yes — your Windermere separation passes code and looks properly finished, ready for paint.

Will it pass inspection in Windermere?

Yes — we install the correct Type X assembly and seal penetrations to spec so your Windermere separation passes inspection.

What if someone cuts into it later?

That is the risk — a fan, a light or a duct added later can quietly undo the assembly. We photograph the rated work before covering it so there is a record of what is behind the finish for whoever works on the house next.

Fire-Rated Drywall Windermere Edmonton | Type X Board

Type X board in Windermere for garages, suites and mechanical rooms

No shortcuts on Windermere fire-rating — separations, suites and party walls need code Type X rated assemblies to clear inspection and keep people safe. In Windermere we install fire-rated drywall to code and finish it clean. Windermere is an established south Edmonton community of 1960s-70s homes where ceiling stipple, settling cracks and dated texture are common, so fire-rated work here is common on garages and suites. We cover Windermere, Allard, Ambleside, Blackburne and Southwest, 7 days a week.

Rated assemblies installed and sealed correctly
Garage-to-house firewall separations
Party walls between units
Windermere coverage — we come to you
Finished clean and inspection-ready
Joints taped as part of the rated assembly, not just for looks
Type X fire-rated board to code in Windermere

Fire-rated garages, suites and party walls in Windermere

Garage firewalls

The most common fire-rated job in Windermere is the garage-to-house separation — Type X board on the common wall and ceiling. Code-compliant install and finish.

Legal suites and shared walls

Frequent work in Windermere homes and multi-unit buildings. We build the rated separations these require. See our legal suite drywall page.

Windermere drywall in context

About Windermere

Windermere likely comes from the words "winder", which means "to take one's breath away", and "mere", which refers to the boundary of an area or a significant landmark.

What we see in Windermere

In Windermere the drywall work is first-year settling, basement dev for first owners, Level 5 over builder-grade. We confirm what your home actually needs on site, in writing, before anything starts.

Common fire-rated situations in Windermere

In Windermere, windermere sits in Edmonton's Southwest district. Windermere likely comes from the words "winder", which means "to take one's breath away", and "mere", which refers to the boundary of an area or a significant landmark. Across roughly 3,105 homes here, the drywall work is first-year settling, basement dev for first owners, Level 5 over builder-grade. We cover Windermere and the surrounding Southwest district, 7 days a week. One fixed price after an honest on-site look, and the job done right the first time.

Penetrations are where ratings are lost

Every hole is a path

Electrical boxes, plumbing, ducting and pot lights all pierce a rated wall or ceiling in Windermere. Each one is a route for fire and smoke unless it is firestopped to suit the assembly.

Sequencing matters

Firestopping happens before the finish goes on. We coordinate with your other trades so penetrations are made and sealed before we tape, rather than cut into a finished rated ceiling afterwards and leave it open behind the paint.

Type X and Type C are not interchangeable

Two different boards

Type X is the common 5/8 inch rated board. Type C carries additional additives that resist shrinkage at high heat and is specified where an assembly — often a ceiling — depends on the board staying in place longer.

Substituting downward fails

Where drawings call for Type C, Type X is not an equivalent, and an inspector who spots it will fail the assembly. We order to the specification on your Windermere drawings and tell you if what is on site does not match it.

What affects the cost of fire-rated drywall in Windermere?

Area and assembly

The cost in Windermere depends on the area and the rated assembly required — a single-layer garage ceiling is different from a two-layer party wall. The Windermere rating drives the build-up, and Type X board carries a premium over standard. We price off the spec and a site look.

Passing inspection in Windermere

The common rated jobs here are garages and suites. The rating only holds if the assembly is built and sealed exactly to spec, so we install it to code and seal penetrations properly so your Windermere project passes the first time.

Coordinating with the electrician early

Boxes in rated walls

Outlet and switch boxes in a rated Windermere assembly need treatment — spacing rules, pads or listed boxes — and back-to-back boxes are a particular problem.

Why early matters

Rearranging a box after board is up means opening a rated wall. Walking the wall with the electrician before boarding takes ten minutes and avoids that entirely.

How it works

Simple, clean, on schedule — Fire-Rated Drywall in Windermere Edmonton

Free quote

We come out to your Windermere Edmonton property, take a real look at the fire-rated drywall, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every fire-rated drywall quote in Windermere Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the fire-rated drywall in Windermere Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Windermere Edmonton home while we finish the fire-rated drywall to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished fire-rated drywall with us and you're happy with the result in Windermere Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the fire-rated drywall contractor Windermere Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your fire-rated drywall project in Windermere Edmonton.

Read our reviews on Google

FAQ — Fire-Rated Drywall Windermere Edmonton

Fire-Rated Drywall Windermere Edmonton: your questions answered

Do you handle the firestopping as well as the board?: We firestop the penetrations that fall within our scope and coordinate the sequence with the other trades so nothing is covered before it is sealed. Where a penetration belongs to another trade, we flag it rather than tape over it.
My Windermere garage ceiling has board but the joints are open. Is that a problem?: Usually yes. Untaped joints are one of the most common reasons a garage separation is not complete, because the board looks installed. Often the fix is finishing the joints and sealing penetrations rather than replacing the ceiling.
Can pot lights go in a rated ceiling?: Only with fixtures and firestopping suited to that assembly. A standard fixture cut into a rated Windermere ceiling breaks the separation. We coordinate the locations with your electrician so the penetrations are handled before we tape.
Can you finish the fire-rated board too?: Yes — your Windermere separation passes code and looks properly finished, ready for paint.
Will it pass inspection in Windermere?: Yes — we install the correct Type X assembly and seal penetrations to spec so your Windermere separation passes inspection.
What if someone cuts into it later?: That is the risk — a fan, a light or a duct added later can quietly undo the assembly. We photograph the rated work before covering it so there is a record of what is behind the finish for whoever works on the house next.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Fire-Rated Drywall Windermere Edmonton

Type X board in Windermere for garages, suites and mechanical rooms