Is Type X the same as fireproof?

No. Type X resists fire for a stated period inside a tested assembly, which buys time to get out. Nothing about it makes a wall fireproof, and the rating only holds if the whole assembly — board, spacing, joints and penetrations — is built as specified.

My Patricia Heights garage ceiling has board but the joints are open. Is that a problem?

Usually yes. Untaped joints are one of the most common reasons a garage separation is not complete, because the board looks installed. Often the fix is finishing the joints and sealing penetrations rather than replacing the ceiling.

Can I use 1/2 inch board if that is what is on site?

Not in a rated assembly. Type X is 5/8 inch because the core needs that mass and reinforcement to hold together under heat. It looks identical once finished and it is not the tested assembly — we check board against the specification.

Will it pass inspection in Patricia Heights?

Yes — we install the correct Type X assembly and seal penetrations to spec so your Patricia Heights separation passes inspection.

How do I know which rated assembly my Patricia Heights project needs?

It comes from your drawings or from the building official at permit stage, not from us and not from the board supplier. We build to the assembly you have been given, and if what is specified does not match what is on site we will tell you before boarding.

Does the rated wall have to go above the ceiling?

Yes. A separation that stops at a suspended ceiling is not a separation — fire and smoke go over it. The wall runs to the structure above and is sealed at both ends. It is the detail most often missed in conversions.

Fire-Rated Drywall Patricia Heights Edmonton | Type X Board

Type X board in Patricia Heights for garages, suites and mechanical rooms

No shortcuts on Patricia Heights fire-rating — separations, suites and party walls need code Type X rated assemblies to clear inspection and keep people safe. In Patricia Heights we install fire-rated drywall to code and finish it clean. Patricia Heights is one of Jasper Place's newer communities, where fresh installation and first-year settling work are common, so fire-rated work here is common on garages and suites. We cover Patricia Heights, Britannia Youngstown, Canora, Crestwood and Jasper Place, 7 days a week.

Basement legal-suite fire separations
Finished clean and inspection-ready
Joints taped as part of the rated assembly, not just for looks
Garage ceilings and garage-to-house separations in Patricia Heights
Patricia Heights coverage — we come to you
Party walls between units
Furnace and mechanical room enclosures

Coordinating with the electrician early

Boxes in rated walls

Outlet and switch boxes in a rated Patricia Heights assembly need treatment — spacing rules, pads or listed boxes — and back-to-back boxes are a particular problem.

Why early matters

Rearranging a box after board is up means opening a rated wall. Walking the wall with the electrician before boarding takes ten minutes and avoids that entirely.

Patricia Heights drywall in context

About Patricia Heights

This area was annexed to the City in 1964, and is dominated by single-family homes.

What we see in Patricia Heights

In Patricia Heights the drywall work is plaster and lath repair, popcorn and stipple ceiling removal, careful patching into original surfaces. We confirm what your home actually needs on site, in writing, before anything starts.

What affects the cost of fire-rated drywall in Patricia Heights?

Area and assembly

The cost in Patricia Heights depends on the area and the rated assembly required — a single-layer garage ceiling is different from a two-layer party wall. The Patricia Heights rating drives the build-up, and Type X board carries a premium over standard. We price off the spec and a site look.

Passing inspection in Patricia Heights

The common rated jobs here are garages and suites. The rating only holds if the assembly is built and sealed exactly to spec, so we install it to code and seal penetrations properly so your Patricia Heights project passes the first time.

Rated does not mean soundproof

Two different goals

People often assume a fire-rated Patricia Heights wall is also a sound wall. It is denser than a standard wall so it helps a little, but rating and acoustic performance are separate specifications.

When both are needed

A suite separation usually needs both, and they are built together. If sound is what you actually care about, we would rather design for that explicitly than let a rating imply it.

Finishing a rated wall in Patricia Heights without compromising it

Rated first, pretty second

Taping on a rated assembly in Patricia Heights does two jobs: it completes the fire separation and it produces the surface you will paint. The tape and fill on the rated joints is not optional cosmetic work.

Level of finish

Beyond the rated joint treatment, the visible finish level is your choice — a garage ceiling rarely needs the same finish as a living room. We will tell you where a higher level is worth paying for and where it is not.

Common fire-rated situations in Patricia Heights

In Patricia Heights, patricia Heights sits in Edmonton's Jasper Place district. This area was annexed to the City in 1964, and is dominated by single-family homes. Across roughly 665 homes here, the drywall work is plaster and lath repair, popcorn and stipple ceiling removal, careful patching into original surfaces. We cover Patricia Heights and the surrounding Jasper Place district, 7 days a week. We handle all of it the same careful way — on-site quote, fixed price, done right.

One-hour and two-hour assemblies

What the number means

A rating is how long a tested assembly resisted fire under laboratory conditions, not a guarantee about your Patricia Heights house. One hour is the common residential separation; two hour appears between units in some buildings.

Why it changes the build

A two-hour assembly is usually two layers of board with offset joints, which changes material, labour and thickness. It is specified on the drawings and it is not something to substitute down.

How it works

Simple, clean, on schedule — Fire-Rated Drywall in Patricia Heights Edmonton

Free quote

We come out to your Patricia Heights Edmonton property, take a real look at the fire-rated drywall, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every fire-rated drywall quote in Patricia Heights Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the fire-rated drywall in Patricia Heights Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Patricia Heights Edmonton home while we finish the fire-rated drywall to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished fire-rated drywall with us and you're happy with the result in Patricia Heights Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the fire-rated drywall contractor Patricia Heights Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your fire-rated drywall project in Patricia Heights Edmonton.

Read our reviews on Google

FAQ — Fire-Rated Drywall Patricia Heights Edmonton

Fire-Rated Drywall Patricia Heights Edmonton: your questions answered

Is Type X the same as fireproof?: No. Type X resists fire for a stated period inside a tested assembly, which buys time to get out. Nothing about it makes a wall fireproof, and the rating only holds if the whole assembly — board, spacing, joints and penetrations — is built as specified.
My Patricia Heights garage ceiling has board but the joints are open. Is that a problem?: Usually yes. Untaped joints are one of the most common reasons a garage separation is not complete, because the board looks installed. Often the fix is finishing the joints and sealing penetrations rather than replacing the ceiling.
Can I use 1/2 inch board if that is what is on site?: Not in a rated assembly. Type X is 5/8 inch because the core needs that mass and reinforcement to hold together under heat. It looks identical once finished and it is not the tested assembly — we check board against the specification.
Will it pass inspection in Patricia Heights?: Yes — we install the correct Type X assembly and seal penetrations to spec so your Patricia Heights separation passes inspection.
How do I know which rated assembly my Patricia Heights project needs?: It comes from your drawings or from the building official at permit stage, not from us and not from the board supplier. We build to the assembly you have been given, and if what is specified does not match what is on site we will tell you before boarding.
Does the rated wall have to go above the ceiling?: Yes. A separation that stops at a suspended ceiling is not a separation — fire and smoke go over it. The wall runs to the structure above and is sealed at both ends. It is the detail most often missed in conversions.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Fire-Rated Drywall Patricia Heights Edmonton

Type X board in Patricia Heights for garages, suites and mechanical rooms