Is Type X the same as fireproof?

No. Type X resists fire for a stated period inside a tested assembly, which buys time to get out. Nothing about it makes a wall fireproof, and the rating only holds if the whole assembly — board, spacing, joints and penetrations — is built as specified.

Is a fire-rated wall also soundproof?

It helps a little because it is denser, but rating and acoustic performance are separate specifications. A suite separation usually needs both, built together. If sound is the real goal we would rather design for it explicitly.

Can you finish the fire-rated board too?

Yes — your Charlesworth separation passes code and looks properly finished, ready for paint.

Do you install fire-rated drywall in Charlesworth?

Yes — fire-rated drywall in Charlesworth is part of our regular work, and we are usually booked within the week. We also cover Decoteau, Ellerslie, Summerside and Ellerslie.

Do you handle the firestopping as well as the board?

We firestop the penetrations that fall within our scope and coordinate the sequence with the other trades so nothing is covered before it is sealed. Where a penetration belongs to another trade, we flag it rather than tape over it.

Will it pass inspection in Charlesworth?

Yes — we install the correct Type X assembly and seal penetrations to spec so your Charlesworth separation passes inspection.

Fire-Rated Drywall Charlesworth Edmonton | Type X Board

Fire-rated drywall in Charlesworth, installed to code

In Charlesworth the code decides: garage separations, basement suites and party walls must carry Type X board in a rated assembly to pass inspection and protect the home. In Charlesworth we install fire-rated drywall to code and finish it clean. Charlesworth is this established Ellerslie community where reno, repair and ceiling drywall are common, so fire-rated work here is common on garages and suites. We cover Charlesworth, Decoteau, Ellerslie, Summerside and Ellerslie, 7 days a week.

Finished clean and inspection-ready
Type X fire-rated board to code in Charlesworth
Garage ceilings and garage-to-house separations in Charlesworth
Penetrations firestopped before the finish goes on
Basement legal-suite fire separations
Party walls and legal-suite separations
Party walls between units

Joints, screws and the details inspectors actually check

The parts nobody photographs

A rated assembly in Charlesworth depends on screw spacing, joints landing on framing, and joints being taped and filled. Loose screw spacing, unsupported butt joints and untaped joints are the usual reasons a rated wall does not pass.

Two-layer assemblies

Where the assembly is two layers, the second layer joints are offset from the first so no joint runs straight through the wall. That offset is part of the rating, not a finishing preference.

Fire-rated garages, suites and party walls in Charlesworth

Garage firewalls

The most common fire-rated job in Charlesworth is the garage-to-house separation — Type X board on the common wall and ceiling. Code-compliant install and finish.

Legal suites and shared walls

Frequent work in Charlesworth homes and multi-unit buildings. We build the rated separations these require. See our legal suite drywall page.

Inspection, and what we hand over

Sequencing with your inspection

Rated assemblies in Charlesworth are usually inspected before the finish covers them, so we sequence boarding and firestopping to suit your inspection date rather than working ahead and covering something the inspector needs to see.

If something fails

If an assembly does not pass, we want to hear the inspector reason directly. Most failures are specific and fixable — a screw pattern, an untaped joint, an unsealed penetration — and are corrected faster from the actual note than from a second-hand summary.

Why Charlesworth homeowners trust Emplastrum for fire-rated drywall

To code, and finished clean

A rated assembly has to be right for safety and inspection, and finished well for the room — in Charlesworth we do both, installing to code and finishing flat.

Fixed price, same-day reply

We install fire-rated drywall across Charlesworth and Ellerslie, 7 days a week. Fixed pricing on free Charlesworth quotes, a clean site and a guarantee on the work. When an Charlesworth job is not right, we make it right — on us.

What affects the cost of fire-rated drywall in Charlesworth?

Area and assembly

The cost in Charlesworth depends on the area and the rated assembly required — a single-layer garage ceiling is different from a two-layer party wall. The Charlesworth rating drives the build-up, and Type X board carries a premium over standard. We price off the spec and a site look.

Passing inspection in Charlesworth

The common rated jobs here are garages and suites. The rating only holds if the assembly is built and sealed exactly to spec, so we install it to code and seal penetrations properly so your Charlesworth project passes the first time.

Rated does not mean soundproof

Two different goals

People often assume a fire-rated Charlesworth wall is also a sound wall. It is denser than a standard wall so it helps a little, but rating and acoustic performance are separate specifications.

When both are needed

A suite separation usually needs both, and they are built together. If sound is what you actually care about, we would rather design for that explicitly than let a rating imply it.

How it works

Simple, clean, on schedule — Fire-Rated Drywall in Charlesworth Edmonton

Free quote

We come out to your Charlesworth Edmonton property, take a real look at the fire-rated drywall, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every fire-rated drywall quote in Charlesworth Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the fire-rated drywall in Charlesworth Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Charlesworth Edmonton home while we finish the fire-rated drywall to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished fire-rated drywall with us and you're happy with the result in Charlesworth Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the fire-rated drywall contractor Charlesworth Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your fire-rated drywall project in Charlesworth Edmonton.

Read our reviews on Google

FAQ — Fire-Rated Drywall Charlesworth Edmonton

Fire-Rated Drywall Charlesworth Edmonton: your questions answered

Is Type X the same as fireproof?: No. Type X resists fire for a stated period inside a tested assembly, which buys time to get out. Nothing about it makes a wall fireproof, and the rating only holds if the whole assembly — board, spacing, joints and penetrations — is built as specified.
Is a fire-rated wall also soundproof?: It helps a little because it is denser, but rating and acoustic performance are separate specifications. A suite separation usually needs both, built together. If sound is the real goal we would rather design for it explicitly.
Can you finish the fire-rated board too?: Yes — your Charlesworth separation passes code and looks properly finished, ready for paint.
Do you install fire-rated drywall in Charlesworth?: Yes — fire-rated drywall in Charlesworth is part of our regular work, and we are usually booked within the week. We also cover Decoteau, Ellerslie, Summerside and Ellerslie.
Do you handle the firestopping as well as the board?: We firestop the penetrations that fall within our scope and coordinate the sequence with the other trades so nothing is covered before it is sealed. Where a penetration belongs to another trade, we flag it rather than tape over it.
Will it pass inspection in Charlesworth?: Yes — we install the correct Type X assembly and seal penetrations to spec so your Charlesworth separation passes inspection.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Fire-Rated Drywall Charlesworth Edmonton

Fire-rated drywall in Charlesworth, installed to code