Do you install fire-rated drywall in Matt Berry?

Yes — fire-rated drywall in Matt Berry is part of our regular work, and we are usually booked within the week. We also cover Balwin, Bannerman, Belmont and Northeast.

Where is fire-rated drywall required?

The standard Matt Berry fire-rating locations: garage-to-house walls, basement suites and party walls between units. We confirm what your Matt Berry project needs.

How do I know which rated assembly my Matt Berry project needs?

It comes from your drawings or from the building official at permit stage, not from us and not from the board supplier. We build to the assembly you have been given, and if what is specified does not match what is on site we will tell you before boarding.

Can you finish the fire-rated board too?

Yes — your Matt Berry separation passes code and looks properly finished, ready for paint.

Is a fire-rated wall also soundproof?

It helps a little because it is denser, but rating and acoustic performance are separate specifications. A suite separation usually needs both, built together. If sound is the real goal we would rather design for it explicitly.

Do you stand behind your fire-rated work in Matt Berry?

Yes. We install to code and walk the Matt Berry job with you, and if something is not right we come back and make it right.

Fire-Rated Drywall Matt Berry Edmonton | Type X Board

Rated separations in Matt Berry that pass inspection the first time

Most fire-rated work we do in Matt Berry is one of four things: a garage ceiling under living space, a party wall between units, a furnace or mechanical room, or a legal-suite separation. Each has its own assembly, and the drawings or the building official decide which one applies — not us and not the supplier.

Type X board to the assembly on the drawings
Party walls and legal-suite separations
Type X fire-rated board to code in Matt Berry
Matt Berry coverage — we come to you
Rated assemblies installed and sealed correctly
Penetrations firestopped before the finish goes on
Garage-to-house firewall separations

Coordinating with the electrician early

Boxes in rated walls

Outlet and switch boxes in a rated Matt Berry assembly need treatment — spacing rules, pads or listed boxes — and back-to-back boxes are a particular problem.

Why early matters

Rearranging a box after board is up means opening a rated wall. Walking the wall with the electrician before boarding takes ten minutes and avoids that entirely.

Matt Berry drywall in context

About Matt Berry

Matt Berry was named in honour of a Canadian aviation pioneer.

What we see in Matt Berry

In Matt Berry the drywall work is popcorn and stipple ceiling removal, settling+truss-uplift cracks, nail pops, Poly-B repipe patching repipe patching. We confirm what your home actually needs on site, in writing, before anything starts.

Fire-rated drywall in a Matt Berry garage ceiling

The most common one we do

Where Matt Berry living space sits over a garage, the ceiling normally needs a rated separation. It is also the assembly most often found incomplete on older homes and DIY conversions — board up, joints untaped, pot lights cut straight through.

What we check before quoting

We look at what is above the ceiling, what is already installed, and whether the existing board is actually rated. Sometimes the honest answer is that the existing ceiling only needs its joints completed and its penetrations sealed rather than replacing.

What makes drywall fire-rated in Matt Berry

The board is only part of it

Type X board carries a glass-fibre reinforced core that holds together longer under heat. That is what earns the rating in a lab, but only inside a tested assembly: a stated board thickness, stud spacing, screw pattern and joint treatment.

Why that matters on your job

Putting Type X on a wall does not make the wall rated. In Matt Berry we build the assembly the drawings specify, because an inspector is checking the system, not the sticker on the board.

Why Matt Berry homeowners trust Emplastrum for fire-rated drywall

To code, and finished clean

A rated assembly has to be right for safety and inspection, and finished well for the room — in Matt Berry we do both, installing to code and finishing flat.

Fixed price, same-day reply

We install fire-rated drywall across Matt Berry and Northeast, 7 days a week. Fixed pricing on free Matt Berry quotes, a clean site and a guarantee on the work. When an Matt Berry job is not right, we make it right — on us.

Joints, screws and the details inspectors actually check

The parts nobody photographs

A rated assembly in Matt Berry depends on screw spacing, joints landing on framing, and joints being taped and filled. Loose screw spacing, unsupported butt joints and untaped joints are the usual reasons a rated wall does not pass.

Two-layer assemblies

Where the assembly is two layers, the second layer joints are offset from the first so no joint runs straight through the wall. That offset is part of the rating, not a finishing preference.

Type X and Type C are not interchangeable

Two different boards

Type X is the common 5/8 inch rated board. Type C carries additional additives that resist shrinkage at high heat and is specified where an assembly — often a ceiling — depends on the board staying in place longer.

Substituting downward fails

Where drawings call for Type C, Type X is not an equivalent, and an inspector who spots it will fail the assembly. We order to the specification on your Matt Berry drawings and tell you if what is on site does not match it.

How it works

Simple, clean, on schedule — Fire-Rated Drywall in Matt Berry Edmonton

Free quote

We come out to your Matt Berry Edmonton property, take a real look at the fire-rated drywall, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every fire-rated drywall quote in Matt Berry Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the fire-rated drywall in Matt Berry Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Matt Berry Edmonton home while we finish the fire-rated drywall to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished fire-rated drywall with us and you're happy with the result in Matt Berry Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the fire-rated drywall contractor Matt Berry Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your fire-rated drywall project in Matt Berry Edmonton.

Read our reviews on Google

FAQ — Fire-Rated Drywall Matt Berry Edmonton

Fire-Rated Drywall Matt Berry Edmonton: your questions answered

Do you install fire-rated drywall in Matt Berry?: Yes — fire-rated drywall in Matt Berry is part of our regular work, and we are usually booked within the week. We also cover Balwin, Bannerman, Belmont and Northeast.
Where is fire-rated drywall required?: The standard Matt Berry fire-rating locations: garage-to-house walls, basement suites and party walls between units. We confirm what your Matt Berry project needs.
How do I know which rated assembly my Matt Berry project needs?: It comes from your drawings or from the building official at permit stage, not from us and not from the board supplier. We build to the assembly you have been given, and if what is specified does not match what is on site we will tell you before boarding.
Can you finish the fire-rated board too?: Yes — your Matt Berry separation passes code and looks properly finished, ready for paint.
Is a fire-rated wall also soundproof?: It helps a little because it is denser, but rating and acoustic performance are separate specifications. A suite separation usually needs both, built together. If sound is the real goal we would rather design for it explicitly.
Do you stand behind your fire-rated work in Matt Berry?: Yes. We install to code and walk the Matt Berry job with you, and if something is not right we come back and make it right.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Fire-Rated Drywall Matt Berry Edmonton

Rated separations in Matt Berry that pass inspection the first time