Can pot lights go in a rated ceiling?

Only with fixtures and firestopping suited to that assembly. A standard fixture cut into a rated Cavanagh ceiling breaks the separation. We coordinate the locations with your electrician so the penetrations are handled before we tape.

Do you stand behind your fire-rated work in Cavanagh?

Yes. We install to code and walk the Cavanagh job with you, and if something is not right we come back and make it right.

Where is fire-rated drywall required?

The standard Cavanagh fire-rating locations: garage-to-house walls, basement suites and party walls between units. We confirm what your Cavanagh project needs.

Can you finish the fire-rated board too?

Yes — your Cavanagh separation passes code and looks properly finished, ready for paint.

Is Type X the same as fireproof?

No. Type X resists fire for a stated period inside a tested assembly, which buys time to get out. Nothing about it makes a wall fireproof, and the rating only holds if the whole assembly — board, spacing, joints and penetrations — is built as specified.

Will it pass inspection in Cavanagh?

Yes — we install the correct Type X assembly and seal penetrations to spec so your Cavanagh separation passes inspection.

Fire-Rated Drywall Cavanagh Edmonton | Type X Board

Type X board in Cavanagh for garages, suites and mechanical rooms

In Cavanagh the code decides: garage separations, basement suites and party walls must carry Type X board in a rated assembly to pass inspection and protect the home. In Cavanagh we install fire-rated drywall to code and finish it clean. Cavanagh is this established Southwest community where reno, repair and ceiling drywall are common, so fire-rated work here is common on garages and suites. We cover Cavanagh, Allard, Ambleside, Blackburne and Southwest, 7 days a week.

Joints taped as part of the rated assembly, not just for looks
Garage ceilings and garage-to-house separations in Cavanagh
Cavanagh coverage — we come to you
Penetrations firestopped before the finish goes on
Party walls between units
Finished clean and inspection-ready
Rated assemblies installed and sealed correctly

Our Cavanagh fire-rated drywall process, step by step

Right board, right build-up

In Cavanagh we confirm the required rating, then install the correct Type X board in the right layers — the assembly, not just the board, is what carries the rating.

Seal and finish

Penetrations and edges are where a rated assembly fails, so we firestop and seal them, then tape and finish the board clean. An Cavanagh separation the inspector approves and the eye approves too.

Sealing at the top and bottom of a rated wall

The wall has to be continuous

A rated separation that stops at a suspended ceiling, or has a gap at the floor, is not a separation. Fire and smoke go over and under it.

Deck to deck

In an Cavanagh build the rated wall runs to the structure above and is sealed at both ends. It is the detail most often missed in conversions where a wall was built to the ceiling and no further.

One-hour and two-hour assemblies

What the number means

A rating is how long a tested assembly resisted fire under laboratory conditions, not a guarantee about your Cavanagh house. One hour is the common residential separation; two hour appears between units in some buildings.

Why it changes the build

A two-hour assembly is usually two layers of board with offset joints, which changes material, labour and thickness. It is specified on the drawings and it is not something to substitute down.

Penetrations are where ratings are lost

Every hole is a path

Electrical boxes, plumbing, ducting and pot lights all pierce a rated wall or ceiling in Cavanagh. Each one is a route for fire and smoke unless it is firestopped to suit the assembly.

Sequencing matters

Firestopping happens before the finish goes on. We coordinate with your other trades so penetrations are made and sealed before we tape, rather than cut into a finished rated ceiling afterwards and leave it open behind the paint.

What makes drywall fire-rated in Cavanagh

The board is only part of it

Type X board carries a glass-fibre reinforced core that holds together longer under heat. That is what earns the rating in a lab, but only inside a tested assembly: a stated board thickness, stud spacing, screw pattern and joint treatment.

Why that matters on your job

Putting Type X on a wall does not make the wall rated. In Cavanagh we build the assembly the drawings specify, because an inspector is checking the system, not the sticker on the board.

Finishing a rated wall in Cavanagh without compromising it

Rated first, pretty second

Taping on a rated assembly in Cavanagh does two jobs: it completes the fire separation and it produces the surface you will paint. The tape and fill on the rated joints is not optional cosmetic work.

Level of finish

Beyond the rated joint treatment, the visible finish level is your choice — a garage ceiling rarely needs the same finish as a living room. We will tell you where a higher level is worth paying for and where it is not.

How it works

Simple, clean, on schedule — Fire-Rated Drywall in Cavanagh Edmonton

Free quote

We come out to your Cavanagh Edmonton property, take a real look at the fire-rated drywall, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every fire-rated drywall quote in Cavanagh Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the fire-rated drywall in Cavanagh Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Cavanagh Edmonton home while we finish the fire-rated drywall to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished fire-rated drywall with us and you're happy with the result in Cavanagh Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the fire-rated drywall contractor Cavanagh Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your fire-rated drywall project in Cavanagh Edmonton.

Read our reviews on Google

FAQ — Fire-Rated Drywall Cavanagh Edmonton

Fire-Rated Drywall Cavanagh Edmonton: your questions answered

Can pot lights go in a rated ceiling?: Only with fixtures and firestopping suited to that assembly. A standard fixture cut into a rated Cavanagh ceiling breaks the separation. We coordinate the locations with your electrician so the penetrations are handled before we tape.
Do you stand behind your fire-rated work in Cavanagh?: Yes. We install to code and walk the Cavanagh job with you, and if something is not right we come back and make it right.
Where is fire-rated drywall required?: The standard Cavanagh fire-rating locations: garage-to-house walls, basement suites and party walls between units. We confirm what your Cavanagh project needs.
Can you finish the fire-rated board too?: Yes — your Cavanagh separation passes code and looks properly finished, ready for paint.
Is Type X the same as fireproof?: No. Type X resists fire for a stated period inside a tested assembly, which buys time to get out. Nothing about it makes a wall fireproof, and the rating only holds if the whole assembly — board, spacing, joints and penetrations — is built as specified.
Will it pass inspection in Cavanagh?: Yes — we install the correct Type X assembly and seal penetrations to spec so your Cavanagh separation passes inspection.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Fire-Rated Drywall Cavanagh Edmonton

Type X board in Cavanagh for garages, suites and mechanical rooms