Is Type X the same as fireproof?

No. Type X resists fire for a stated period inside a tested assembly, which buys time to get out. Nothing about it makes a wall fireproof, and the rating only holds if the whole assembly — board, spacing, joints and penetrations — is built as specified.

Will it pass inspection in Inglewood?

Yes — we install the correct Type X assembly and seal penetrations to spec so your Inglewood separation passes inspection.

Can pot lights go in a rated ceiling?

Only with fixtures and firestopping suited to that assembly. A standard fixture cut into a rated Inglewood ceiling breaks the separation. We coordinate the locations with your electrician so the penetrations are handled before we tape.

Does the rated wall have to go above the ceiling?

Yes. A separation that stops at a suspended ceiling is not a separation — fire and smoke go over it. The wall runs to the structure above and is sealed at both ends. It is the detail most often missed in conversions.

How do I know which rated assembly my Inglewood project needs?

It comes from your drawings or from the building official at permit stage, not from us and not from the board supplier. We build to the assembly you have been given, and if what is specified does not match what is on site we will tell you before boarding.

Do you install fire-rated drywall in Inglewood?

Yes — fire-rated drywall in Inglewood is part of our regular work, and we are usually booked within the week. We also cover Boyle Street, Central McDougall, Dovercourt and Central.

Fire-Rated Drywall Inglewood Edmonton | Type X Board

Rated separations in Inglewood that pass inspection the first time

No shortcuts on Inglewood fire-rating — separations, suites and party walls need code Type X rated assemblies to clear inspection and keep people safe. In Inglewood we install fire-rated drywall to code and finish it clean. Inglewood is one of Central's newer communities, where fresh installation and first-year settling work are common, so fire-rated work here is common on garages and suites. We cover Inglewood, Boyle Street, Central McDougall, Dovercourt and Central, 7 days a week.

Type X fire-rated board to code in Inglewood
Type X board to the assembly on the drawings
Furnace and mechanical room enclosures
Party walls between units
Garage-to-house firewall separations
Basement legal-suite fire separations
Garage ceilings and garage-to-house separations in Inglewood

Board thickness and why 5/8 is standard here

Not just thicker

Type X is 5/8 inch because the core needs that mass and the glass-fibre reinforcement to hold together as the gypsum calcines under heat.

The common error

Using 1/2 inch board in a rated Inglewood assembly because it is what was on site. It looks identical once finished and it is not the tested assembly. Board arriving on site is checked against the specification rather than assumed.

Inglewood drywall in context

About Inglewood

The name Inglewood was used on a 1905 plan of subdivision and is now applied to the neighbourhood.

What we see in Inglewood

In Inglewood the drywall work is plaster and lath repair, popcorn and stipple ceiling removal, careful patching into original surfaces. We confirm what your home actually needs on site, in writing, before anything starts.

Where Inglewood homes usually need rated board

The four common places

Most rated drywall in Inglewood houses is one of: the garage ceiling where living space sits above it, the garage-to-house wall, the furnace or mechanical room, and a legal-suite separation between dwelling units.

Renovations trigger it too

Finishing a basement, adding a suite or converting a garage often brings a separation into play that was not there before. If you are not sure whether your Inglewood project triggers one, that is a question for the building official at permit stage, and we will tell you when we think you should ask.

Penetrations are where ratings are lost

Every hole is a path

Electrical boxes, plumbing, ducting and pot lights all pierce a rated wall or ceiling in Inglewood. Each one is a route for fire and smoke unless it is firestopped to suit the assembly.

Sequencing matters

Firestopping happens before the finish goes on. We coordinate with your other trades so penetrations are made and sealed before we tape, rather than cut into a finished rated ceiling afterwards and leave it open behind the paint.

What affects the cost of fire-rated drywall in Inglewood?

Area and assembly

The cost in Inglewood depends on the area and the rated assembly required — a single-layer garage ceiling is different from a two-layer party wall. The Inglewood rating drives the build-up, and Type X board carries a premium over standard. We price off the spec and a site look.

Passing inspection in Inglewood

The common rated jobs here are garages and suites. The rating only holds if the assembly is built and sealed exactly to spec, so we install it to code and seal penetrations properly so your Inglewood project passes the first time.

Why Inglewood homeowners trust Emplastrum for fire-rated drywall

To code, and finished clean

A rated assembly has to be right for safety and inspection, and finished well for the room — in Inglewood we do both, installing to code and finishing flat.

Fixed price, same-day reply

We install fire-rated drywall across Inglewood and Central, 7 days a week. Fixed pricing on free Inglewood quotes, a clean site and a guarantee on the work. When an Inglewood job is not right, we make it right — on us.

Joints, screws and the details inspectors actually check

The parts nobody photographs

A rated assembly in Inglewood depends on screw spacing, joints landing on framing, and joints being taped and filled. Loose screw spacing, unsupported butt joints and untaped joints are the usual reasons a rated wall does not pass.

Two-layer assemblies

Where the assembly is two layers, the second layer joints are offset from the first so no joint runs straight through the wall. That offset is part of the rating, not a finishing preference.

How it works

Simple, clean, on schedule — Fire-Rated Drywall in Inglewood Edmonton

Free quote

We come out to your Inglewood Edmonton property, take a real look at the fire-rated drywall, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every fire-rated drywall quote in Inglewood Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the fire-rated drywall in Inglewood Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Inglewood Edmonton home while we finish the fire-rated drywall to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished fire-rated drywall with us and you're happy with the result in Inglewood Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the fire-rated drywall contractor Inglewood Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your fire-rated drywall project in Inglewood Edmonton.

Read our reviews on Google

FAQ — Fire-Rated Drywall Inglewood Edmonton

Fire-Rated Drywall Inglewood Edmonton: your questions answered

Is Type X the same as fireproof?: No. Type X resists fire for a stated period inside a tested assembly, which buys time to get out. Nothing about it makes a wall fireproof, and the rating only holds if the whole assembly — board, spacing, joints and penetrations — is built as specified.
Will it pass inspection in Inglewood?: Yes — we install the correct Type X assembly and seal penetrations to spec so your Inglewood separation passes inspection.
Can pot lights go in a rated ceiling?: Only with fixtures and firestopping suited to that assembly. A standard fixture cut into a rated Inglewood ceiling breaks the separation. We coordinate the locations with your electrician so the penetrations are handled before we tape.
Does the rated wall have to go above the ceiling?: Yes. A separation that stops at a suspended ceiling is not a separation — fire and smoke go over it. The wall runs to the structure above and is sealed at both ends. It is the detail most often missed in conversions.
How do I know which rated assembly my Inglewood project needs?: It comes from your drawings or from the building official at permit stage, not from us and not from the board supplier. We build to the assembly you have been given, and if what is specified does not match what is on site we will tell you before boarding.
Do you install fire-rated drywall in Inglewood?: Yes — fire-rated drywall in Inglewood is part of our regular work, and we are usually booked within the week. We also cover Boyle Street, Central McDougall, Dovercourt and Central.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Fire-Rated Drywall Inglewood Edmonton

Rated separations in Inglewood that pass inspection the first time