Is Type X the same as fireproof?

No. Type X resists fire for a stated period inside a tested assembly, which buys time to get out. Nothing about it makes a wall fireproof, and the rating only holds if the whole assembly — board, spacing, joints and penetrations — is built as specified.

Will it pass inspection in Michaels Park?

Yes — we install the correct Type X assembly and seal penetrations to spec so your Michaels Park separation passes inspection.

Can pot lights go in a rated ceiling?

Only with fixtures and firestopping suited to that assembly. A standard fixture cut into a rated Michaels Park ceiling breaks the separation. We coordinate the locations with your electrician so the penetrations are handled before we tape.

Do you stand behind your fire-rated work in Michaels Park?

Yes. We install to code and walk the Michaels Park job with you, and if something is not right we come back and make it right.

What if someone cuts into it later?

That is the risk — a fan, a light or a duct added later can quietly undo the assembly. We photograph the rated work before covering it so there is a record of what is behind the finish for whoever works on the house next.

Can you finish the fire-rated board too?

Yes — your Michaels Park separation passes code and looks properly finished, ready for paint.

Fire-Rated Drywall Michaels Park Edmonton | Type X Board

Type X board in Michaels Park for garages, suites and mechanical rooms

No shortcuts on Michaels Park fire-rating — separations, suites and party walls need code Type X rated assemblies to clear inspection and keep people safe. In Michaels Park we install fire-rated drywall to code and finish it clean. Michaels Park is an established south Edmonton community of 1960s-70s homes where ceiling stipple, settling cracks and dated texture are common, so fire-rated work here is common on garages and suites. We cover Michaels Park, Bisset, Crawford Plains, Daly Grove and Mill Woods and Meadows, 7 days a week.

Garage-to-house firewall separations
Garage ceilings and garage-to-house separations in Michaels Park
Type X board to the assembly on the drawings
Michaels Park coverage — we come to you
Type X fire-rated board to code in Michaels Park
Finished clean and inspection-ready
Penetrations firestopped before the finish goes on

Where Michaels Park homes usually need rated board

The four common places

Most rated drywall in Michaels Park houses is one of: the garage ceiling where living space sits above it, the garage-to-house wall, the furnace or mechanical room, and a legal-suite separation between dwelling units.

Renovations trigger it too

Finishing a basement, adding a suite or converting a garage often brings a separation into play that was not there before. If you are not sure whether your Michaels Park project triggers one, that is a question for the building official at permit stage, and we will tell you when we think you should ask.

Michaels Park drywall in context

About Michaels Park

Michaels Park was named in honour of John Michaels who was involved in community service for 50 years and was best known for his promotion of aviation and the north country.

What we see in Michaels Park

In Michaels Park the drywall work is plaster and lath repair, popcorn and stipple ceiling removal, careful patching into original surfaces. We confirm what your home actually needs on site, in writing, before anything starts.

Our Michaels Park fire-rated drywall process, step by step

Right board, right build-up

In Michaels Park we confirm the required rating, then install the correct Type X board in the right layers — the assembly, not just the board, is what carries the rating.

Seal and finish

Penetrations and edges are where a rated assembly fails, so we firestop and seal them, then tape and finish the board clean. An Michaels Park separation the inspector approves and the eye approves too.

Inspection, and what we hand over

Sequencing with your inspection

Rated assemblies in Michaels Park are usually inspected before the finish covers them, so we sequence boarding and firestopping to suit your inspection date rather than working ahead and covering something the inspector needs to see.

If something fails

If an assembly does not pass, we want to hear the inspector reason directly. Most failures are specific and fixable — a screw pattern, an untaped joint, an unsealed penetration — and are corrected faster from the actual note than from a second-hand summary.

Rated ceilings and the membrane above

Protecting the structure

A rated ceiling under living space is protecting the floor structure above it, which is why the board and its fastening are specified rather than optional.

Access hatches

Any hatch through it interrupts the assembly and needs a rated detail. It is a common find in Michaels Park garages where storage access was cut in afterwards and never addressed.

Sealing at the top and bottom of a rated wall

The wall has to be continuous

A rated separation that stops at a suspended ceiling, or has a gap at the floor, is not a separation. Fire and smoke go over and under it.

Deck to deck

In an Michaels Park build the rated wall runs to the structure above and is sealed at both ends. It is the detail most often missed in conversions where a wall was built to the ceiling and no further.

Why Michaels Park homeowners trust Emplastrum for fire-rated drywall

To code, and finished clean

A rated assembly has to be right for safety and inspection, and finished well for the room — in Michaels Park we do both, installing to code and finishing flat.

Fixed price, same-day reply

We install fire-rated drywall across Michaels Park and Mill Woods and Meadows, 7 days a week. Fixed pricing on free Michaels Park quotes, a clean site and a guarantee on the work. When an Michaels Park job is not right, we make it right — on us.

How it works

Simple, clean, on schedule — Fire-Rated Drywall in Michaels Park Edmonton

Free quote

We come out to your Michaels Park Edmonton property, take a real look at the fire-rated drywall, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every fire-rated drywall quote in Michaels Park Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the fire-rated drywall in Michaels Park Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Michaels Park Edmonton home while we finish the fire-rated drywall to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished fire-rated drywall with us and you're happy with the result in Michaels Park Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the fire-rated drywall contractor Michaels Park Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your fire-rated drywall project in Michaels Park Edmonton.

Read our reviews on Google

FAQ — Fire-Rated Drywall Michaels Park Edmonton

Fire-Rated Drywall Michaels Park Edmonton: your questions answered

Is Type X the same as fireproof?: No. Type X resists fire for a stated period inside a tested assembly, which buys time to get out. Nothing about it makes a wall fireproof, and the rating only holds if the whole assembly — board, spacing, joints and penetrations — is built as specified.
Will it pass inspection in Michaels Park?: Yes — we install the correct Type X assembly and seal penetrations to spec so your Michaels Park separation passes inspection.
Can pot lights go in a rated ceiling?: Only with fixtures and firestopping suited to that assembly. A standard fixture cut into a rated Michaels Park ceiling breaks the separation. We coordinate the locations with your electrician so the penetrations are handled before we tape.
Do you stand behind your fire-rated work in Michaels Park?: Yes. We install to code and walk the Michaels Park job with you, and if something is not right we come back and make it right.
What if someone cuts into it later?: That is the risk — a fan, a light or a duct added later can quietly undo the assembly. We photograph the rated work before covering it so there is a record of what is behind the finish for whoever works on the house next.
Can you finish the fire-rated board too?: Yes — your Michaels Park separation passes code and looks properly finished, ready for paint.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Fire-Rated Drywall Michaels Park Edmonton

Type X board in Michaels Park for garages, suites and mechanical rooms