Do you install fire-rated drywall in Evansdale?

Yes — fire-rated drywall in Evansdale is part of our regular work, and we are usually booked within the week. We also cover Albany, Athlone, Baranow and Northwest.

My Evansdale garage ceiling has board but the joints are open. Is that a problem?

Usually yes. Untaped joints are one of the most common reasons a garage separation is not complete, because the board looks installed. Often the fix is finishing the joints and sealing penetrations rather than replacing the ceiling.

Where is fire-rated drywall required?

The standard Evansdale fire-rating locations: garage-to-house walls, basement suites and party walls between units. We confirm what your Evansdale project needs.

Do you stand behind your fire-rated work in Evansdale?

Yes. We install to code and walk the Evansdale job with you, and if something is not right we come back and make it right.

How do I know which rated assembly my Evansdale project needs?

It comes from your drawings or from the building official at permit stage, not from us and not from the board supplier. We build to the assembly you have been given, and if what is specified does not match what is on site we will tell you before boarding.

Can I use 1/2 inch board if that is what is on site?

Not in a rated assembly. Type X is 5/8 inch because the core needs that mass and reinforcement to hold together under heat. It looks identical once finished and it is not the tested assembly — we check board against the specification.

Fire-Rated Drywall Evansdale Edmonton | Type X Board

Rated separations in Evansdale that pass inspection the first time

Where code requires it in Evansdale, fire-rated board is mandatory: garage-to-house separations, suites and party walls take Type X in a rated assembly — for inspection and for safety. In Evansdale we install fire-rated drywall to code and finish it clean. Evansdale is an Northwest community with a mix of older homes and newer builds, so fire-rated work here is common on garages and suites. We cover Evansdale, Albany, Athlone, Baranow and Northwest, 7 days a week.

Garage-to-house firewall separations
Basement legal-suite fire separations
Furnace and mechanical room enclosures
Garage ceilings and garage-to-house separations in Evansdale
Type X fire-rated board to code in Evansdale
Rated assemblies installed and sealed correctly
Joints taped as part of the rated assembly, not just for looks

Finishing a rated wall in Evansdale without compromising it

Rated first, pretty second

Taping on a rated assembly in Evansdale does two jobs: it completes the fire separation and it produces the surface you will paint. The tape and fill on the rated joints is not optional cosmetic work.

Level of finish

Beyond the rated joint treatment, the visible finish level is your choice — a garage ceiling rarely needs the same finish as a living room. We will tell you where a higher level is worth paying for and where it is not.

What makes drywall fire-rated in Evansdale

The board is only part of it

Type X board carries a glass-fibre reinforced core that holds together longer under heat. That is what earns the rating in a lab, but only inside a tested assembly: a stated board thickness, stud spacing, screw pattern and joint treatment.

Why that matters on your job

Putting Type X on a wall does not make the wall rated. In Evansdale we build the assembly the drawings specify, because an inspector is checking the system, not the sticker on the board.

Fire-rated garages, suites and party walls in Evansdale

Garage firewalls

The most common fire-rated job in Evansdale is the garage-to-house separation — Type X board on the common wall and ceiling. Code-compliant install and finish.

Legal suites and shared walls

Frequent work in Evansdale homes and multi-unit buildings. We build the rated separations these require. See our legal suite drywall page.

Rated does not mean soundproof

Two different goals

People often assume a fire-rated Evansdale wall is also a sound wall. It is denser than a standard wall so it helps a little, but rating and acoustic performance are separate specifications.

When both are needed

A suite separation usually needs both, and they are built together. If sound is what you actually care about, we would rather design for that explicitly than let a rating imply it.

Common fire-rated situations in Evansdale

In Evansdale, evansdale sits in Edmonton's Northwest district. Evansdale is named for H.M.E. Evans, Mayor of Edmonton in 1918. Across roughly 2,065 homes here, the drywall work is plaster and lath repair, popcorn and stipple ceiling removal, careful patching into original surfaces. We cover Evansdale and the surrounding Northwest district, 7 days a week. One fixed price after an honest on-site look, and the job done right the first time.

Joints, screws and the details inspectors actually check

The parts nobody photographs

A rated assembly in Evansdale depends on screw spacing, joints landing on framing, and joints being taped and filled. Loose screw spacing, unsupported butt joints and untaped joints are the usual reasons a rated wall does not pass.

Two-layer assemblies

Where the assembly is two layers, the second layer joints are offset from the first so no joint runs straight through the wall. That offset is part of the rating, not a finishing preference.

How it works

Simple, clean, on schedule — Fire-Rated Drywall in Evansdale Edmonton

Free quote

We come out to your Evansdale Edmonton property, take a real look at the fire-rated drywall, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every fire-rated drywall quote in Evansdale Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the fire-rated drywall in Evansdale Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Evansdale Edmonton home while we finish the fire-rated drywall to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished fire-rated drywall with us and you're happy with the result in Evansdale Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the fire-rated drywall contractor Evansdale Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your fire-rated drywall project in Evansdale Edmonton.

Read our reviews on Google

FAQ — Fire-Rated Drywall Evansdale Edmonton

Fire-Rated Drywall Evansdale Edmonton: your questions answered

Do you install fire-rated drywall in Evansdale?: Yes — fire-rated drywall in Evansdale is part of our regular work, and we are usually booked within the week. We also cover Albany, Athlone, Baranow and Northwest.
My Evansdale garage ceiling has board but the joints are open. Is that a problem?: Usually yes. Untaped joints are one of the most common reasons a garage separation is not complete, because the board looks installed. Often the fix is finishing the joints and sealing penetrations rather than replacing the ceiling.
Where is fire-rated drywall required?: The standard Evansdale fire-rating locations: garage-to-house walls, basement suites and party walls between units. We confirm what your Evansdale project needs.
Do you stand behind your fire-rated work in Evansdale?: Yes. We install to code and walk the Evansdale job with you, and if something is not right we come back and make it right.
How do I know which rated assembly my Evansdale project needs?: It comes from your drawings or from the building official at permit stage, not from us and not from the board supplier. We build to the assembly you have been given, and if what is specified does not match what is on site we will tell you before boarding.
Can I use 1/2 inch board if that is what is on site?: Not in a rated assembly. Type X is 5/8 inch because the core needs that mass and reinforcement to hold together under heat. It looks identical once finished and it is not the tested assembly — we check board against the specification.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Fire-Rated Drywall Evansdale Edmonton

Rated separations in Evansdale that pass inspection the first time