What if someone cuts into it later?

That is the risk — a fan, a light or a duct added later can quietly undo the assembly. We photograph the rated work before covering it so there is a record of what is behind the finish for whoever works on the house next.

How do I know which rated assembly my Schonsee project needs?

It comes from your drawings or from the building official at permit stage, not from us and not from the board supplier. We build to the assembly you have been given, and if what is specified does not match what is on site we will tell you before boarding.

Will it pass inspection in Schonsee?

Yes — we install the correct Type X assembly and seal penetrations to spec so your Schonsee separation passes inspection.

Can pot lights go in a rated ceiling?

Only with fixtures and firestopping suited to that assembly. A standard fixture cut into a rated Schonsee ceiling breaks the separation. We coordinate the locations with your electrician so the penetrations are handled before we tape.

My Schonsee garage ceiling has board but the joints are open. Is that a problem?

Usually yes. Untaped joints are one of the most common reasons a garage separation is not complete, because the board looks installed. Often the fix is finishing the joints and sealing penetrations rather than replacing the ceiling.

Can I use 1/2 inch board if that is what is on site?

Not in a rated assembly. Type X is 5/8 inch because the core needs that mass and reinforcement to hold together under heat. It looks identical once finished and it is not the tested assembly — we check board against the specification.

Fire-Rated Drywall Schonsee Edmonton | Type X Board

Rated separations in Schonsee that pass inspection the first time

Most fire-rated work we do in Schonsee is one of four things: a garage ceiling under living space, a party wall between units, a furnace or mechanical room, or a legal-suite separation. Each has its own assembly, and the drawings or the building official decide which one applies — not us and not the supplier.

Joints taped as part of the rated assembly, not just for looks
Finished clean and inspection-ready
Type X fire-rated board to code in Schonsee
Rated assemblies installed and sealed correctly
Penetrations firestopped before the finish goes on
Schonsee coverage — we come to you
Garage-to-house firewall separations

Why Schonsee homeowners trust Emplastrum for fire-rated drywall

To code, and finished clean

A rated assembly has to be right for safety and inspection, and finished well for the room — in Schonsee we do both, installing to code and finishing flat.

Fixed price, same-day reply

We install fire-rated drywall across Schonsee and Northeast, 7 days a week. Fixed pricing on free Schonsee quotes, a clean site and a guarantee on the work. When an Schonsee job is not right, we make it right — on us.

Schonsee drywall in context

About Schonsee

The name Schonsee is derived from the German word "schon", meaning beautiful, and "see" meaning lake.

What we see in Schonsee

In Schonsee the drywall work is first-year settling, basement dev for first owners, Level 5 over builder-grade. We confirm what your home actually needs on site, in writing, before anything starts.

What makes drywall fire-rated in Schonsee

The board is only part of it

Type X board carries a glass-fibre reinforced core that holds together longer under heat. That is what earns the rating in a lab, but only inside a tested assembly: a stated board thickness, stud spacing, screw pattern and joint treatment.

Why that matters on your job

Putting Type X on a wall does not make the wall rated. In Schonsee we build the assembly the drawings specify, because an inspector is checking the system, not the sticker on the board.

Coordinating with the electrician early

Boxes in rated walls

Outlet and switch boxes in a rated Schonsee assembly need treatment — spacing rules, pads or listed boxes — and back-to-back boxes are a particular problem.

Why early matters

Rearranging a box after board is up means opening a rated wall. Walking the wall with the electrician before boarding takes ten minutes and avoids that entirely.

Type X and Type C are not interchangeable

Two different boards

Type X is the common 5/8 inch rated board. Type C carries additional additives that resist shrinkage at high heat and is specified where an assembly — often a ceiling — depends on the board staying in place longer.

Substituting downward fails

Where drawings call for Type C, Type X is not an equivalent, and an inspector who spots it will fail the assembly. We order to the specification on your Schonsee drawings and tell you if what is on site does not match it.

Common fire-rated situations in Schonsee

In Schonsee, schonsee sits in Edmonton's Northeast district. The name Schonsee is derived from the German word "schon", meaning beautiful, and "see" meaning lake. Across roughly 1,140 homes here, the drywall work is first-year settling, basement dev for first owners, Level 5 over builder-grade. We cover Schonsee and the surrounding Northeast district, 7 days a week. Same trusted team, same process on every job — on-site quote, fixed price, no surprises.

Rated does not mean soundproof

Two different goals

People often assume a fire-rated Schonsee wall is also a sound wall. It is denser than a standard wall so it helps a little, but rating and acoustic performance are separate specifications.

When both are needed

A suite separation usually needs both, and they are built together. If sound is what you actually care about, we would rather design for that explicitly than let a rating imply it.

How it works

Simple, clean, on schedule — Fire-Rated Drywall in Schonsee Edmonton

Free quote

We come out to your Schonsee Edmonton property, take a real look at the fire-rated drywall, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every fire-rated drywall quote in Schonsee Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the fire-rated drywall in Schonsee Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Schonsee Edmonton home while we finish the fire-rated drywall to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished fire-rated drywall with us and you're happy with the result in Schonsee Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the fire-rated drywall contractor Schonsee Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your fire-rated drywall project in Schonsee Edmonton.

Read our reviews on Google

FAQ — Fire-Rated Drywall Schonsee Edmonton

Fire-Rated Drywall Schonsee Edmonton: your questions answered

What if someone cuts into it later?: That is the risk — a fan, a light or a duct added later can quietly undo the assembly. We photograph the rated work before covering it so there is a record of what is behind the finish for whoever works on the house next.
How do I know which rated assembly my Schonsee project needs?: It comes from your drawings or from the building official at permit stage, not from us and not from the board supplier. We build to the assembly you have been given, and if what is specified does not match what is on site we will tell you before boarding.
Will it pass inspection in Schonsee?: Yes — we install the correct Type X assembly and seal penetrations to spec so your Schonsee separation passes inspection.
Can pot lights go in a rated ceiling?: Only with fixtures and firestopping suited to that assembly. A standard fixture cut into a rated Schonsee ceiling breaks the separation. We coordinate the locations with your electrician so the penetrations are handled before we tape.
My Schonsee garage ceiling has board but the joints are open. Is that a problem?: Usually yes. Untaped joints are one of the most common reasons a garage separation is not complete, because the board looks installed. Often the fix is finishing the joints and sealing penetrations rather than replacing the ceiling.
Can I use 1/2 inch board if that is what is on site?: Not in a rated assembly. Type X is 5/8 inch because the core needs that mass and reinforcement to hold together under heat. It looks identical once finished and it is not the tested assembly — we check board against the specification.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Fire-Rated Drywall Schonsee Edmonton

Rated separations in Schonsee that pass inspection the first time