Do you handle the firestopping as well as the board?

We firestop the penetrations that fall within our scope and coordinate the sequence with the other trades so nothing is covered before it is sealed. Where a penetration belongs to another trade, we flag it rather than tape over it.

Can you finish over rated board so it looks like the rest of the room?

Yes. The rated joint treatment comes first because it is part of the assembly, then the visible finish is taken to whatever level suits the room. A Wild Rose garage ceiling and a living room do not need the same finish level.

Is Type X the same as fireproof?

No. Type X resists fire for a stated period inside a tested assembly, which buys time to get out. Nothing about it makes a wall fireproof, and the rating only holds if the whole assembly — board, spacing, joints and penetrations — is built as specified.

Can I put an access hatch in my rated garage ceiling?

Only with a rated detail. Any hatch interrupts the assembly. It is a common find in Wild Rose garages where storage access was cut in afterwards and never addressed.

What if someone cuts into it later?

That is the risk — a fan, a light or a duct added later can quietly undo the assembly. We photograph the rated work before covering it so there is a record of what is behind the finish for whoever works on the house next.

Do you stand behind your fire-rated work in Wild Rose?

Yes. We install to code and walk the Wild Rose job with you, and if something is not right we come back and make it right.

Fire-Rated Drywall Wild Rose Edmonton | Type X Board

Type X board in Wild Rose for garages, suites and mechanical rooms

No shortcuts on Wild Rose fire-rating — separations, suites and party walls need code Type X rated assemblies to clear inspection and keep people safe. In Wild Rose we install fire-rated drywall to code and finish it clean. Wild Rose is one of Mill Woods and Meadows's newer communities, where fresh installation and first-year settling work are common, so fire-rated work here is common on garages and suites. We cover Wild Rose, Bisset, Crawford Plains, Daly Grove and Mill Woods and Meadows, 7 days a week.

Joints taped as part of the rated assembly, not just for looks
Type X board to the assembly on the drawings
Basement legal-suite fire separations
Finished clean and inspection-ready
Garage ceilings and garage-to-house separations in Wild Rose
Furnace and mechanical room enclosures
Rated assemblies installed and sealed correctly

Fire-rated drywall in a Wild Rose garage ceiling

The most common one we do

Where Wild Rose living space sits over a garage, the ceiling normally needs a rated separation. It is also the assembly most often found incomplete on older homes and DIY conversions — board up, joints untaped, pot lights cut straight through.

What we check before quoting

We look at what is above the ceiling, what is already installed, and whether the existing board is actually rated. Sometimes the honest answer is that the existing ceiling only needs its joints completed and its penetrations sealed rather than replacing.

Wild Rose drywall in context

About Wild Rose

Wild Rose is named for Alberta's official flower, Rosa acicularis (wild rose), which has been this province's official flower since the 1930s.

What we see in Wild Rose

In Wild Rose the drywall work is first-year settling, basement dev for first owners, Level 5 over builder-grade. We confirm what your home actually needs on site, in writing, before anything starts.

Rated ceilings and the membrane above

Protecting the structure

A rated ceiling under living space is protecting the floor structure above it, which is why the board and its fastening are specified rather than optional.

Access hatches

Any hatch through it interrupts the assembly and needs a rated detail. It is a common find in Wild Rose garages where storage access was cut in afterwards and never addressed.

Why Wild Rose homeowners trust Emplastrum for fire-rated drywall

To code, and finished clean

A rated assembly has to be right for safety and inspection, and finished well for the room — in Wild Rose we do both, installing to code and finishing flat.

Fixed price, same-day reply

We install fire-rated drywall across Wild Rose and Mill Woods and Meadows, 7 days a week. Fixed pricing on free Wild Rose quotes, a clean site and a guarantee on the work. When an Wild Rose job is not right, we make it right — on us.

What makes drywall fire-rated in Wild Rose

The board is only part of it

Type X board carries a glass-fibre reinforced core that holds together longer under heat. That is what earns the rating in a lab, but only inside a tested assembly: a stated board thickness, stud spacing, screw pattern and joint treatment.

Why that matters on your job

Putting Type X on a wall does not make the wall rated. In Wild Rose we build the assembly the drawings specify, because an inspector is checking the system, not the sticker on the board.

Type X and Type C are not interchangeable

Two different boards

Type X is the common 5/8 inch rated board. Type C carries additional additives that resist shrinkage at high heat and is specified where an assembly — often a ceiling — depends on the board staying in place longer.

Substituting downward fails

Where drawings call for Type C, Type X is not an equivalent, and an inspector who spots it will fail the assembly. We order to the specification on your Wild Rose drawings and tell you if what is on site does not match it.

Fire-rated garages, suites and party walls in Wild Rose

Garage firewalls

The most common fire-rated job in Wild Rose is the garage-to-house separation — Type X board on the common wall and ceiling. Code-compliant install and finish.

Legal suites and shared walls

Frequent work in Wild Rose homes and multi-unit buildings. We build the rated separations these require. See our legal suite drywall page.

How it works

Simple, clean, on schedule — Fire-Rated Drywall in Wild Rose Edmonton

Free quote

We come out to your Wild Rose Edmonton property, take a real look at the fire-rated drywall, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every fire-rated drywall quote in Wild Rose Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the fire-rated drywall in Wild Rose Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Wild Rose Edmonton home while we finish the fire-rated drywall to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished fire-rated drywall with us and you're happy with the result in Wild Rose Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the fire-rated drywall contractor Wild Rose Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your fire-rated drywall project in Wild Rose Edmonton.

Read our reviews on Google

FAQ — Fire-Rated Drywall Wild Rose Edmonton

Fire-Rated Drywall Wild Rose Edmonton: your questions answered

Do you handle the firestopping as well as the board?: We firestop the penetrations that fall within our scope and coordinate the sequence with the other trades so nothing is covered before it is sealed. Where a penetration belongs to another trade, we flag it rather than tape over it.
Can you finish over rated board so it looks like the rest of the room?: Yes. The rated joint treatment comes first because it is part of the assembly, then the visible finish is taken to whatever level suits the room. A Wild Rose garage ceiling and a living room do not need the same finish level.
Is Type X the same as fireproof?: No. Type X resists fire for a stated period inside a tested assembly, which buys time to get out. Nothing about it makes a wall fireproof, and the rating only holds if the whole assembly — board, spacing, joints and penetrations — is built as specified.
Can I put an access hatch in my rated garage ceiling?: Only with a rated detail. Any hatch interrupts the assembly. It is a common find in Wild Rose garages where storage access was cut in afterwards and never addressed.
What if someone cuts into it later?: That is the risk — a fan, a light or a duct added later can quietly undo the assembly. We photograph the rated work before covering it so there is a record of what is behind the finish for whoever works on the house next.
Do you stand behind your fire-rated work in Wild Rose?: Yes. We install to code and walk the Wild Rose job with you, and if something is not right we come back and make it right.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Fire-Rated Drywall Wild Rose Edmonton

Type X board in Wild Rose for garages, suites and mechanical rooms